◆SET 系列双螺杆挤出造粒机，挤出形式有前出料和侧出料两种。经混合、捏和的湿物料或低软化点 ( 一般小于 50℃ ) 物料在螺杆输送、挤压作用下，从机头开孔模板挤出，再经过干燥或冷却得到颗粒成品，从而实现将粉状产品改变为均匀的颗粒产品的目的。颗粒形状为圆柱状，成品颗粒直径可由模板开孔孔径调节和控制：侧出料为 0.7-2.0mm，前出料为 1.5-12mm，成粒率≥95％。
◆The machine of front and side for material to be extruded out. Wet material or material with
low melting point (general means<50℃ ) after being kneaded and mixed shall be extruded outfrom mould plate at the head of the plant due to being conveyed and pressed by screws，
and then be dried or cooled to form end products of particles so as to complete the course
of changing material from powder to particle. The shape of grain is cylindrical. The diameter
of end grain can be chosen and controlled by means of changing the diameter of holes in themould plate: for side type is 0.7-2.0 mm, for front type is 1.5-2 mm. The rate of end product
is equal to or more than 95％ .
◆ SET 系列双螺杆挤压造粒机广泛适用于橡胶助剂、食品添加剂、塑料助剂、催化齐、农药、染料、颜料、日化、制药行业需造粒的产品。
◆The plant is widely applied to material needs granulating such as rubber auxiliar, food additive, plastic auxiliary,catalyzer,agrochemicals, dye, pigment, daily chemicals, medicine etc.
SET 系列双螺杆挤压造粒机技术参数
采购中心
