干燥设备 粉碎设备 混合设备 反应设备 过滤分离设备 过滤材料 灭菌设备 萃取设备 贮存设备 传热设备 锅炉 塔设备 结晶设备 其他制药设备
科海思(北京)科技有限公司湖北分公司
产地 | 进口 | 产品新旧 | 全新 |
---|---|---|---|
物理性质 | 球状颗粒 |
抛光树脂制备医疗行业工艺用水 是由核子级强酸型阳离子Tulsimer ® T-46Li 及核子级强碱型阴离子 Tulsimer ® A-33OH 以1:2 体积比的剂量比例 , 预先混合的混床级离子交换树脂,专门提供给超纯水系统抛光用,具有的交换容量及优越的物理特性。适合用于电子产业 ,生产半导体及映像管产业,实验室,激光,精仪器,医用行业等需要超纯水。
一、产品介绍抛光树脂制备医疗行业工艺用水Tulsimer ® MB-106UP为阶核子级抛光树脂, 是由核子级强酸型阳离子Tulsimer ® T-46Li 及核子级强碱型阴离子 Tulsimer ® A-33OH 以1:2 体积比的剂量比例 , 预先混合的混床级离子交换树脂,专门提供给超纯水系统抛光用,具有的交换容量及优越的物理特性。适合用于电子产业 ,生产半导体及映像管产业,实验室,激光,精仪器,医用行业等需要超纯水的行业,以及核电厂等使用。我们有数十家 核电厂使用我们的抛光树脂。
二、重要参数
Tulsimer ®T-46 (阳) | Tulsimer ®A-33 (阴) | |
型式(Type) | 强酸性阳离子交换树脂 (Strong acid Cation exchange resin) | 强碱性阴离子交换树脂 (Strong base Anion exchange resin) |
主体结构(Matrix Structure) | 苯乙烯(Cross linked polystyrene) | 苯乙烯(Cross linked polystyrene) |
功能基 (Functional Group) | 硫酸基(Sulfonic acid) | 4级胺(Quaternary ammonium Type I) |
物理性貭(Physical Form) | 球状颗粒(Moist spherical beads) | 球状颗粒(Moist spherical beads) |
离子型式(Ionic form supplied) | 氢(Hydrogen) | 氢氧(Hydroxide) |
粒径范围(U.S.mesh in wet) | 16 to 50 | 16 to 50 |
粒度范围 (Particle Size) | 0.3 to 1.2 mm | 0.3 to 1.2 mm |
微粒含量(Fines Content) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
总交换容量 (Total Exch. Capacity) | 1.8 meq/ml minimum of 99% in hydrogen form | 1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
PH范围 (pH Range) | 0 to 14 | 0 to 14 |
允许温度 (Temp. Stability) | 120°C | 60°C |
微粒含量(Fines Content) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
总交换容量 (Total Exch. Capacity) | 1.8 meq/ml minimum of 99% in hydrogen form | 1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
PH范围 (pH Range) | 0 to 14 | 0 to 14 |
允许温度 (Temp. Stability) | 120°C | 60°C |
溶解率 (Solubility) | Insoluble in all common solvents | Insoluble in all common solvents |
溶出有机物(Organic leachable) | Less than 0.2 mg KMNO4 per ml of wet resin | Less than 0.2 mg KMNO4 per ml of wet resin |
密度Backwash settled density | Approx.750 gm/liter | Approx.750 gm/liter |
不纯物(Impurities) | Fe=50 ppm(max) | Fe=50 ppm(max) |
Cu=50 ppm(max) | Cu=50 ppm(max) | |
Pb=50 ppm(max) | Pb=50 ppm(max) | |
球粒强度(Bead strength) | Avg. not less than 300g/bead by Chatillon test (ASTM Standard) |
三、产品优势
1、具有交换容量及优越的物理特性
2、我们有数十家 核电厂使用我们的抛光树脂
3、MB-106UP为阶核子级抛光树脂, 是由核子级强酸型阳离子
四、使用场景抛光树脂制备医疗行业工艺用水
适合用于电子产业 ,生产半导体及映像管产业
实验室,激光,精仪器,医用行业等需要超纯水的行业
核电厂等使用
专门提供给超纯水系统抛光用
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
制药网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份