制药网
详细介绍
在实际条件下测试电池供电的便携式设备，需要一个直流电源可以在各种不同状况下模拟电池性能。 2300 系列电池模拟电源可模拟电池的输出电阻和输出电压响应。 这些电源的双通道版本提供一条通道充当电池并接收电流，用于模拟放电的可充电电池；另一条通道提供电压用于测试设备的充电控制电路。
特点 | 优势 |
| 超快响应瞬态负载电流 | 提供与实际电池相同的输出特性。 |
可变输出电阻 | 允许模拟电池的内部电阻。 |
| 脉冲峰值、平均值和基线负载电流测量 | 支持测量负载电流进行功耗验证或分析。 |
| 100nA 直流电流灵敏度 | 为监视电池供电产品的睡眠模式低电流提供所需的灵敏度。 |
| 电流级别测量功能 | 支持在各种设备操作状态水平下测量负载电流。 |
| 接收高达 3A | 就像一个电子负载，允许这些电源模拟放电的可充电电池，用于测试电池充电器或电池充电器控制电路的性能。 |
| 打开感应导线检测 | 指示远程感应导线是否存在中断，或者远程感应导线与测试夹具的连接是否存在开路。 |
| 内置数字电压表 | 允许在测试系统的任何位置测量 –5V 到 +30V 直流的信号，其额定准确度与电源电压回读相同。 |
The characteristics of
advantage
The ultra-fast response to the transient load current provides exactly the same output characteristics as the actual battery.
Variable output resistor
Allows to simulate the internal resistance of the battery.
Pulse peak, mean and baseline load current measurements support the measurement of load current for power verification or analysis.
The 100nA dc current sensitivity provides the required sensitivity to monitor low sleeping mode currents in battery-powered products.
The current level measurement function supports the measurement of load current at various operating conditions.
A rechargeable battery that receives up to 3A as an electronic load, allowing these power supplies to simulate discharge, for testing the performance of a battery charger or battery charger control circuit.
Turn on the sensor wire to detect if there is a break in the remote sensor wire or if there is an open connection between the remote sensor wire and the test fixture.
The built-in digital voltmeter allows the measurement of -- 5V to +30V dc signals at any point in the test system with the same rated accuracy as the power voltage read back.
制药网