Fluke 1664 FC 多功能安装测试仪

主要特性

Fluke 1664 FC 安装测试仪使您可以遵守所有当地法规快速高效地进行测试，对可能会在无意中连接至被测系统的设备提供保护，并可以通过智能手机轻松分享测试结果。

自动测试功能可测试线路/回路阻抗、RCD 脱扣电流/脱扣时间，通过单一连接并按一下按钮即可进行绝缘测试。

附带大电流回路模式。与在非脱扣模式下测试 RCD 回路相比，测量速度更快。

Z-max 存储（回路测试）– 易于评估回路测试值。

的调零适配器，便于快速、始终可靠和精确地测试导线和电源线补偿。

使用电源线快速测量 L-N、L-PE 和 N-PE 之间的电压。无需更改测量连接。

同时测量 RCD 脱扣电流和脱扣时间（AC 型和 A 型 RCD）。

同时提供两个测量值并提供双显示。同时测量并显示 PEFC 或 PSC 及回路阻抗，节省时间。

环路测试 - 用功能键选择所需的输入插座 - 无需交换测试导线。

自动启动回路及 RCD 测试 – 电源电压一稳定即开始测试。

Earth Volt Touchpad 可检测大于 50 V 的接地电压升高，指示潜在的危险情况。

随附采用安全设计的 SureGrip™ 测试导线和线夹，为用户提供舒适、可靠的握持和一致的结果。

旋钮清晰指示选定的功能，所有操作汇集一处，没有复杂的多级菜单。

带背光的大显示屏，清晰的符号及超宽视角，便于轻松安全地读数。

通过/失败指示（RCD 测试结果）。

RCD 变流模式允许自定义设置。

回路电阻与线路电阻达到 mΩ 分辨率。

测试平稳直流灵敏 RCD（B 型）。

3 层扩展内存。

使用通断性测试电流测量电机绕组。

可承受 1 米坠落。

小巧轻便（小于 1.3 kg）并随附加厚背带，可腾出双手进行全天测试。

The main features

Fluke 1664 FC installs a tester that allows you to quickly and efficiently test in compliance with all local regulations, provides protection to devices that may inadvertently connect to the system under test, and easily shares test results with your smartphone.

The automatic test function can test the circuit/loop impedance, RCD trip current/trip time. The insulation test can be carried out by a single connection and pressing the button.

With large current loop mode. Compared with testing the RCD loop in non-trip mode, the measurement speed is faster.

Z-max storage (loop test) - easy to evaluate maximum loop test values.

Unique zeroing adapter for quick, always reliable and accurate testing of leads and power line compensation.

The voltage between L-N, L-PE and N-PE is quickly measured using a power cord. There is no need to change the measured connection.

Tripping current and tripping time (AC and A RCD) were measured simultaneously.

Two measurements are provided and a double display is provided. Simultaneously measure and display PEFC or PSC and loop impedance to save time.

Loop test - select the desired input socket with the function key - no need to switch test leads.

Automatic start circuit and RCD test -- test will be started as soon as the power voltage is stable.

The Earth Volt Touchpad can detect ground voltage increases greater than 50 V, indicating potential hazardous conditions.

Attached the safety design of SureGrip ™ test wires and wire clip, to provide users with a comfortable, reliable grip and consistent results.

The knob clearly indicates the selected function, all operations together in one place, no complex multi-level menu.

Large backlit display with clear symbols and wide viewing Angle for easy and safe reading.

Pass/fail indication (RCD test results).

RCD converter mode allows custom Settings.

Loop resistance and line resistance reach m Ω resolution.

Test stable dc sensitive RCD (type B).

Layer 3 expands memory.

Measure the motor windings using the on-off test current.

Can withstａnd 1 meter fall.

Small and light (less than 1.3kg) with thickened straps to free hands for all-day testing.