P7633低压差分探头

P7600 系列 TriMode 探头和 MSO/DPO70000DX 及 DPO/DSA70000D 系列示波器设计提供业内的系统噪声水平。要在低幅度信号上进行准确测量，这种高灵敏度是非常重要的。

主要性能指标

• 完整 33 GHz 带宽到达探头端部 (P7633)

• 业内的探头和示波器系统噪声

主要特点

• TriMode™ 探头 - 一次设置无需调整探头端部连接即可完成三种测量

• 差分

• 单端

• 共模

• 远程头部设计连接

• 使用 P7500 系列 TriMode 焊入式探头端部

• 2.92mm

• SMP

• 可将探头放大器靠近被测电路放置

• 同轴适配器

• P7500 探头端部适配器

• 探头自动检测端部并应用 DSP 纠正滤波器

• 特定于探头的 S 参数

• 从探头内存储数据创建 DSP 滤波器

• TekConnect® 接口 - TekConnect 示波器/探头控制和使用

• 从探头补偿盒或示波器菜单直接控制

The P7600 series TriMode probes and MSO/DPO70000DX and DPO/DSA70000D series oscilloscopes are designed to provide the lowest level of system noise in the industry. This high sensitivity is important for accurate measurements at low amplitude signals.

Key performance indicators

Full 33 GHz bandwidth reaches the end of the probe (P7633)

Industry's lowest probe and oscilloscope system noise

The main features

TriMode ™ probe - once set up without having to adjust the probe end connection can complete three measurements

The differential

single-ended

Common mode

Remote header design connection

The probe amplifier can be placed close to the circuit under test

Coaxial adapter

The 2.92 mm

The SMP

P7500 probe end adapter

Use the P7500 series TriMode solder probe end

The probe automatically detects the end and applies a DSP correction filter

S parameters specific to the probe

Creates a unique DSP filter from data stored within the probe

TekConnect ® interface - TekConnect oscilloscope probe control and use

Direct control from probe compensation box or oscilloscope menu