中药浸膏喷雾干燥机 返回列表页

特点:

1.塔体具有冷风夹套;2.塔体上装有自动振打装置;3.塔体，管路配有快开清洗孔及排污孔;4.自动控制恒温加料罐;5.手工高压洗耳恭听塔随机附件;6.与物料接触的部分采用不锈钢材料制作;(或全不锈钢制造)7.物料收集采用两级旋风除尘器装置，或一级旋风除尘器和湿式除尘器;8，进风湿度实现自动控制及连续装置;9.配有气扫装置。

features

1.tower body has jacket of cool air;2.tower body is epuipped with automatic vibration and beating device;3.tower body and pipe line have cleaning hole and swage discharge hole that can open quickly;4.thermostat feeding tank;5.accompanide parts if high pressurewashing tower;6.the parts that can contact with raw material are made of stainless steel fully;7.the collecting of raw material adapts tow-grade cyclone duster or one-grade cyclone duster and one-grade damp duster;8.the temperature of inlet are can be controlled automatically and continuously;9.epuipped with are sweeping device.

该机采用全封闭形式，所有部件均采用不锈钢制造，配有三级净化装置，过滤后的空气达十万级要求。简体与顶部装有冷壁装置，使壁温280℃。干燥塔内装有气刷扫塔装置。经该机干燥后的申药浸膏粉，不会出现焦化变质现象。

基本原理:

中药浸膏高速离心式喷雾装置是离心式喷雾干燥技术在特定物料干燥中的应用，也是利用高速离心式雾化器使物料分散成雾状，与热空气充分接触，完成瞬间干燥，形成粉状成品的干燥装置。中药浸膏于干燥机是专门用来解决中药浸膏和植物撮液的喷雾干燥机，它解决了物料在原lpg高速喷雾干燥机在中药浸盲干燥中出现的以下情况:

1、物料粘壁，收粉率低:2，物料在壁上停留时间长，产生物料的焦化变质现象;3，难以清洗，不符合gmp要求;4，产量低;lpg-l50型喷雾干燥机，其产量只能处理50-6okg/h料液。

鉴于以上状况，我厂根据中药浸膏的物料性质与工艺要求设计了中药浸膏干燥机。它解决了历*中药浸膏干燥机难题，干燥后的物料颜色好、不变质，大大地提高了工厂的经济效益，中药浸盲与lpg高速离心喷雾干燥机相比有了以下特点:1、采用了三级空气净化，使进风达到30万级要求;2，采用了冷壁装置，使内壁温度达s1口80。c，物料在壁上停留也不焦化;3，整个体积是原lpg标准型离心喷雾的3·5倍:4，采用快开冲洗装置，适用于多品种生产要求;5，除尘采用了湿式除尘，使粉尘无外出，符合环保要求;6，采用气扫装置，其效果更令人满意;7，提供雾化器2台，交采用变频调速;8、采用了plc控制，程控系统屏幕显示;9·带冲洗装置;10、采用干空气密闭输送。

general desc-riptionsthe machine adapts full seal form. all parts are made of stainless steel. it is epuipped with three grades of purifying qpparatus.the filtered air reaches the repuirement of one hundred thousand grades. the cooling apparatus of wall is installed at the cylinder body and top. it makes the wall temperature less than 80℃ .air sweeping device is installed inside the drying tower.the dride immersed ointment power of traditional chinese medicine can not appear the phenomenon of carbonization and degeneration. the ratio of received power is raised greatly.moreover is can not produce the phenomenon of medicine mixing and wall staying. basic principle :high-speed centrifuge atomizing apparatus for immersed ointment of traditional chinese medicine is anapplication of centrifuge atomizing technique i special rawmaterial.it is an apparatus using high-speed centrifuge atomizer to make raw material distribute fog that contacts with hot are fully and finish the dry momentarily and form power finished product. the special drier for immersed ointment of trfditional chinese medecine is used to solve immersed ointment of traditional chinese medicine and extracted liquid of phant. it solves the condetions existed in original lpg high-speed atomizing drier.1. raw material is attached to wall and the ratio of received powder is low;2. because the staying time of raw material at wall is long,the phenomenon of carbonization and degeneration can be porduced;3. it is different to clean and can not meet the requirement of gmp;4. low in output;model lpg-150 atomizing centrifuge drier can process 50-60 kg/h of raw material liquid.in view of this,according to the properties and process requirements of immersed ointment of traditional chinese medicine,our factory researched and desighed the special drier for immersed ointment of traditional chinese medicine and won two items of china patent.it solves the historical difficult problems in drying immersed ointment of traditional chinese medicine.the color of dried raw material is good .the dried raw material does not degenerate.it raises the economic benefit greatly .compared with original lpg high-speed atomizing drier,it has the following features.1. being adapted three-grade are purification,the inlet air reaches the requirement of one hundred thousand grade;2. being adapted wall cooling device,the temperature of inner wall with be 80℃ .even if raw material is stayed on the wall, it can not carbonize;3. its whole volume is 3.5times of standard lpg high-speed atomizing drier;4. being adapted quick washing device.it is can meet the requirements of production for varieties products;5. being adapted damp dust removing device,there is no power dust out.it is in conformity with the requirement of gmp;6. being adapted are sweeping device,the clean effect is satisfied;7. equipped two sets of atomizer and adapted frequency control;8. adapted plc control and display through the screen of program control system;9. equipped with washing device;10.adapt the seal method to transport dry air.