产品介绍：
干粉混合机为V型高效不对称混合机，它适用于化工、食品、医药、饲料、陶瓷、冶金等行业的粉料或颗料状物料的混和。该机结构合理、简单、操作密闭，进出料方便，（人工或真空加料）筒体采用不锈钢材料制作，便于清洗，是企业的基础设备之一。
VH-8 V型小型混合机、药物混合机 简介与特点：
一、概述：
本机适用于制药、化工、食品的干粉状、颗粒装物料的混合。
该机混料筒结构*，混合均匀，效率高，不积料。整机结构简单，操作容易。外表面和物料接触部分均采用优质不锈钢制造，造型美观，维护、清洗方便。
二、原理与结构：
本机一端装有电机与减速机，电机功率通过皮带传给减速机，减速机再通过联国器传给V型桶。使V型桶连续运转，带动桶内物料在桶内上、下、左、右进行混合。
三、使用及保养：
1、安装：将机械放置平稳，装好机脚，垫平，使机械能运转自如。
2、使用前先将须加油处加好油，然后进行空载运转，检查各紧固件是否松动，电气是否正常，机械是否运转正常，如有异常，进行整修和调试。
3、将加料口转*面，打开加料盖进行加料，加料量不可超过规定容积，然后关紧加料盖，开动机器进行运转，途中如发现异常，必须停机检查。
4、下班后或更换品种必须将料斗内、外冲洗干净。
四、主要技术参数：
规格 | 桶体容积 | 工作容积 | 电动机功率 | 混合转速 | 外形尺寸 | zui大装量 | VH5 | 5L | 2L | 0.25kw | 24r/min | 560×270×560 | 2kg | VH8 | 8L | 3.2L | 0.55kw | 24r/min | 610×280×740 | 3.2kg | VH10 | 10L | 4L | 0.75kw | 24r/min | 610×280×740 | 4kg | V14 | 14L | 5.6L | 0.37kw | 20r/min | 780×350×850 | 5.6kg |
|
Product introduction:
This product is a v-shaped efficient asymmetric hybrid machine, it is used in the chemical industry, food, medicine, feed, ceramics, metallurgy field powder or makings shape material mixing. The structure is reasonable, is simple, the operation airtight, access to materials convenient, (artificially or vacuum charging) barrel made of stainless steel, easy cleaning, is one of enterprise's foundation equipments.
VH - 14 v-shaped small mixer, drug mixer introduction and features:
A, summary:
The machine is suitable for pharmaceutical, chemical and foodstuff dry powder, granule outfit to mix the raw materials.
This machine mixing tube structure is unique, mixing, high efficiency, not accumulate material. The machine is simple in structure, easy to operate. Outside surface and part contacting materials adopts high quality stainless steel to make, beautiful modelling, maintain, clean easily.
Second, principle and structure:
This machine is equipped with end motor and reducer, motor power through belt to reducer, gear reducer again through united GuoQi to V type bucket. Make v-shaped barrels of continuous operation, driving the barrel materials in barrel up, down, left, right mix.
Three, use and maintenance:
1, installation: to mechanical placed smoothly, pack good machine feet, cushion flat, make the mechanical energy function properly.
2, before use shall be refuel in oil, then add good no-load running, check the fastener whether become loose, electrical, mechanical whether whether normal operation, if there are any complications, undertake refurbishment and debugging.
3, will turn to the top, feeding mouth open charging cap to be charging, add shoes do not exceed the specified volume, then appears charging cover, start the machine in motion, if discovery is unusual, on the way to stop check.
4, after work or replace varieties must take the hopper inside and outside is rinsed clean.
四、要求原理与结构
本机一端装有电机与减速机，电机功率通过皮带传给减速机，减速机再通过联轴器传给V型桶。使V型桶连续运转，带动桶内物料在桶内上、下、左、右进行混合。
五、使用及保养
1、安装：将机械放置平稳，装好机脚，垫平，使机械能运转自如。
2、使用前先将须加油处加好油，然后进行空载运转，检查各紧固件是否松动，电气是否正常，机械是否运转正常，如有异常，进行整修和调试。
3、将加料口转*面，打开加料盖进行加料，加料量不可超过规定容积，然后关紧加料盖，开动机器进行运转，途中如发现异常，必须停机检查。
4、下班后或更换品种必须将料斗内、外冲洗干净。
售后服务：
１、本公司商品一律实行三包；
２、本公司随时为客户提供产品的零配件；
３、以下情况不在售后服务之列：
（1）由于人为原因和未按商品说明正确使用、维护、保养等造成损坏和不能正常使用的；
（2）使用非我厂售出的配件而造成的损坏和不能正常使用的。
