JT2全自动药片抛光机是为片剂生产过程中对药片表面粉尘和毛边的去除所提供的设备，药片抛光机和压片机联机后，药片直接进入药片抛光机的抛光网桶，网桶经变频器控制的交流电机进行高速旋转，抛掉药片表面粉末，加上正压吹起装置，可将药片表面粉尘清扫干净，并且有助于静电的消除，药片抛光机的网桶内无毛刺，不会伤及药片表面。 
经过上百余次不同物料试验，这种结构药片抛光机使用安全可靠，产量大，效果好，是对片剂抛光的助手。本药片抛光机全部由 304 不锈钢制造，（也可采用 316 不锈钢），外形美观，拆装清洁时，无需工具，清洁*。

JT2全自动药片抛光机的产品特点： 
1 为交流电机，变频调速可以按照不同的直径不同的粉尘状态调整速度，以达到的抛光状态。 
2 筛网内外全部抛光，旋转叶片使片剂有规律的进行，采用螺旋推进方式，抛光距离可达3.2 米 ，速度快效率高。
3 筛网桶中心全部配置过滤后的压缩空气使片剂表面抛光，同时可消除片剂表面静电，效果更好。
4 高低上下左右均可以调整，使用自如。 
5 整机全部采用医药不锈钢材料，清洁*（整机不锈钢 304 制造），符合GMP。
6 带安全保护行程开关。
7 抛光时带吸尘粉装置，正压吹扫药片表面，吸尘口为负压，无粉尘外逸。
8 本机zui大的特点是产量大，每小时可抛光药片 50 万片 / 小时。（ф 5 药片）  
 

1. The power is AC motor, which can be operated for a long time. The variable frequency speed control can be done according to variable diameter or different states of dusts in order to reach the best burnishing effect.
2. All tablets insideoutside of screen can be burnished. The net bucket is propelled by screw. The rotating blades move the tablets forward in regular pattern. The distance for burnishing can reach 3.2 meters. The speed is fastefficiency is high. The raw edges of tablets can be removed.
3. The blowing air at the center of screen bucket can eliminate the dusts on surface of tablets brought by electrostatic charges. The tablets will have cleaner surfaces after being blown. The bottom of the equipment has dust suction port. During tablet burnishing, the port is connected to negative pressure for dust suction. At the center of screen bucket, the air blow is positive pressure. Therefore, the effect of burnishing is better without overflowing of dusts （the whole unit is manufactured of stainless steel 304）. 
4.  The whole unit is compley manufactured by stainless steel for medicine. Both internalexternal surfaces are weldedpolished. They are clean without blind spot.

零部件展示：

JT2全自动药片抛光机与其他设备进行比较