北京中邦兴业科技有限公司
主营产品: 尘埃粒子计数器,露点检测仪,浮游菌采样器,微生物检测仪,高效检漏系统,温湿度计,风速差压计,流量计,气体质量流量控制器, |
北京中邦兴业科技有限公司
主营产品: 尘埃粒子计数器,露点检测仪,浮游菌采样器,微生物检测仪,高效检漏系统,温湿度计,风速差压计,流量计,气体质量流量控制器, |
参考价 | 面议 |
ActiveCount100微生物采样器,广泛适用于无尘室和无菌环境。它利用 Andersen 空气采样器的原理,抽取空气通过多孔盖 (300*0.6mm),气流中的微生物则撞击附着在标准培养皿中琼脂培养基的表面。完成采样周期之后,将该培养皿放到适宜条件下培养,然后确定菌落总数。按照标准,制药行业用以计量的标准是 1 立方米内微生物总量。
ActiveCount100微生物采样器行业 制药、医院、食品和饮料 无尘室、生物安全柜,光电隔离器 室内空气品质室内空气质量、博物馆、图书馆 化妆品、纺织、农业、环境 额外的无菌环境监测应用
特性 3.5英寸(8.9厘米)彩色触摸屏 直观的用户界面 8个可编程采样量 50个可编程的用户名 400可编程位置名称 流量报警 数据记录到USB闪存驱动器 浮游菌撞击采样头 AC /电池正常使用6小时,2小时充电时间 连续的,周期性和气体采样模式 适用于无菌条件下 直接湿抹布擦拭 可选的压缩气体取样器 参数
ActiveCount100 is a high performance portable microbial sampler suitable for use in cleanrooms and asceptic environ-ments. Continuous and periodic sampling enables complete control on sampling cycles and intervals. Autoclavable impactor head and sanitizable stainless steel enclosure ensure ActiveCount100 does not contaminate your sampling environment. Use the optional gas sampler to monitor compressed gasses. I N D U S T R I E S Pharmaceutical, Hospital, Food & Beverage Cleanrooms, Biological Safety Cabinets, Isolators IAQ Indoor Air Quality, Museums, Libraries Cosmetics, Textiles, Agricultural, Environment Additonal Aseptic Environment Monitoring Applications F E A T U R E S 3.5 inch (8.9 cm) color touch screen Intuitive user interface 8 programmable sampling volumes 50 programmable user names 400 programmable location names Flow rate alarming Data logging to USB flash drive Autoclavable sampling head AC/Battery 6 hrs normal use, 2 hrs charge time Continuous, Periodic and Gas sampling modes Suitable for sterile conditions Wipedownable Optional compressed gas sampler
Included in the box. 1x ActiveCount100 . 1x Dust cover. 1x Sample head. 1x Petri dish adjustment tool. 1x USB 8 GB flash drive with cap. 1x 4-20 threaded tripod adapter. 1x 24 VDC power adapter with chord. 1x Operators manual on USB flash drive. 1x Calibration certificate. 1x Carry case.
Connection to power.
How to setup your first microbiological sample. From home screen press configuration. Load the petri dish with agar. Unscrew sample head together with the dust cover. -always keep dust cover on sample head when not in use. Add sample petri dish. Use adjustment tool to secure petri dish at 3 points. Screw sampling head together with dust cover. back onto ActiveCount100. Start the sample. From the home screen confirm your sample parameters for volume, total countdown time, user and location. Press start to begin the sample. When the sample is complete. Replace the dust cover on the sample head. Unscrew sample head together with the dust cover and always keep dust cover on sample head when ActiveCount100 is not in use. Cover the sampled petri dish and remove from ActiveCount100. Use adjustment tool if needed to loosen petri dish from 3 points. Screw sampling head with the dust cover back onto ActiveCount100.
|
分享到:空间新浪微博腾讯微博人人网