| 常州市佳发制粒干燥设备有限公司
主营产品： 干燥造粒 |
| 常州市佳发制粒干燥设备有限公司
主营产品： 干燥造粒 |
| 参考价 | 面议 |
原理 principle
★该机彩全封闭形式，所有部件均彩不锈钢制造，配有三极净化装置，过滤后的空气达十万级要求。简体与顶部装有冷壁装置，使壁温<80报氏度，干燥塔内装有气刷扫塔装置，经该机干燥后的中药浸膏粉，不会出现焦化变质现象，大大啬了收粉率（达95%以上），而且不会产生混药现象和粘壁现象。< p="">
★基本原理：中药浸膏高速离心式喷雾装置是离心式喷雾干燥技术在特定物料干燥中的应用，也是利用高速离心式雾化器使用权物料分散成雾状，与热空气充分接触，完成瞬间干燥，形成粉状成品的干燥装置。
★中药浸膏喷雾干燥机是专门用来解决中药浸膏和植物撮液的喷雾干燥机。它解决了物料在原LPG高速喷雾干燥机在中药中药浸膏干燥中出现的以下情况：
1、物料粘壁、收粉率低；
2、物料在壁上停滞不前留时间长，产生物料的焦化变质现象；
3、难以清洗，不符合GMP要求；
4、主量低：LPG-150型喷雾干燥机，其产量只能处理50-60kg/h料液。
★鉴于以上状况，我厂根据中药浸膏的物料性质与工艺要求设计了中药浸膏专用干燥机。它解决了历中药浸膏干燥机难题，干燥后的物料颜色好、不变质、大大提高了工厂的经济效益，中药浸膏与LPG高速离心喷雾干燥机相比有以下要求：
1、采用了三级空气净化，使进风达到30万级要求；
2、采用冷壁装置，使内壁温度达到80℃，物料在壁上停留也不焦化；
3、整个体积是原LPG标准离心喷雾的3.5倍；
4、采用快开冲洗装置，适用于多品种生产要求；
5、除尘采用湿式除尘，使粉尘无外出，符合环保要求；
6、采用气扫装置，效果更加满意；
7、提供雾化器2台，采用变频调整；
8、采用PLC控制，程控系统屏幕显示；
9、带冲洗装置；
10、采用干空气密闭输送。
★The machine adopts full seal from.AII parts are made of stainless steel.lt is equipped with three grades of filter.The filtered air is one hundred thousａnd grades.The cooling device of wall is installed at the cylinder body.lt makes the wall temperature less than 800C o Air sweeping device is installed inside the drying tower, The product will not be burnt or deteriorated even stays on the way.The collection rate of powder is raised greatly.Moreover will not cause medicine mixed or wall stick Basic Principle:high-speed centrifuge atomizing for the extract of traditional Chinese medicine is an application of centrifuge atomizing technique.lt is an high-speed atomizing dryer.The following problems are solved.
1.Raw material is stick to the wall and the rate of powder collecting is low.
2.Because the staying time of raw material at wall is long,the phenomenon of burnt and degenration can be produced.
3.lt is difficult to clean and can not meet the requirement of GMP.
4.Low in output:Model LPG-150 atomizing centrifuge dryer can process 50-60kg/h of raw material liquid.ln view of this,according to the properties and process requirements of the extract of traditional Chinese medicine,our factory researched and designed the special dryer for the extract of traditional Chinese medicine and won items of china patent,lt solves the historical difficult problems in drying the extract of traditional Chinese medicine.The color of dried raw material is good.The dried raw material does not degenerate.lt raises the economic benefit greatly.Compared to ordinary LPG high-speed atomizing dryer,it has the following features:
(1).Adopted three-grade air filter,the inlet air is one hundred thousａnd grade.
(2).Adopted wall cooling device,the temperature of inner wall will be on more than 80℃.Even if raw material is stayed on the wall,it will not be burnt.
(3).Its whole volume is 3.5 times of standard LPG high-speed atomizing dryer.
(4).Adopted quick washing device,it is can meet the requirements of production for varieties if products.
(5).Adopted wet-dedusting,there is no powder dust out.lt is in conformity with the requirements of GMP.
(6).Adopted air sweeping device ,the clean effect is satisified.
(7).Equipped with two sets of atomizer and adopted frequency inverter control.
(8).Adopted PLC control and display,ａnd adapted frequency control.
(9).Equipped with washing device on request,
(10).Adopted the seal transport by dry air on request.
特点 Features
★塔体具有冷风夹套；
★塔体上装有自动振打装置；
★塔体、管路配有快开清洗孔及排污孔；
★自动控制恒温加料罐；
★手工高压洗塔随机附件；
★与物料接触的部分采用不锈钢材料制作(或全不锈钢制造）
★物料收集采用两级旋风除尘装置，或一级旋风除尘器和湿式除尘器；
★进风温度实现自动控制及连续装置；
★配有气扫装置。
★Tower body has air cooled jacket.
★Tower body is equipped with automatic vibration device.
★Tower body and pipe line have cleaning hole and sewage discharge hole that can open quickly.
★Thermostat feeding tank on request.
★Mannal high pressure washing machine on request.
★The parts that can contact raw material are made of stainless steel (all entirely stainless steel).
★The collecting of raw material adopts two grades cyclone or one-grade cyclone and one-grade wet-method-deduster.
★The temperature of inlet air can be controlled automatically and continuously.
★Equipped with air sweeping device on request.
| 型号 spec | ZPG-5 | ZPG-10 | ZPG-25 | ZPG-50 | ZPG-80 | ZPG-100 | ZPG-150 | ZPG-200 | ZPG-300 | |
水份蒸发量 evaporation capacity (kg/h) | 5 | 10 | 25 | 50 | 80 | 100 | 150 | 20 | 300 | |
料液处理量 process amount of material liquid (kg/h) | 6-7 | 12-14 | 25-34 | 50-68 | 80-108 | 100-135 | 150-203 | 200-270 | 300-406 | |
成品含量 output of finished product (kg/h) | 1-2 | 2-4 | 4.8-7.2 | 9.2-14 | 14.8-22.4 | 18.4-28 | 24-42 | 36.8-56.4 | 55-85 | |
湿物料含固量 solid content of material liquid (%) | 18-25 | |||||||||
成品含水率 moisture content of finished product (%) | 3-5 | |||||||||
电功率 electric power (kw) | 36 | 45 | 63 | 99 | 132 | 153 | 204 | 246 | 330 | |
加热源 heat source | 蒸汽加电 Steam pius electricity | |||||||||
产品捕集方式及效率 collecting method of product and its efficiency | 两级旋风除尘器或一级旋风除尘器及一级湿式除尘器≥95% Two-grade cyclone or one-grade cyclone and one-grade web-method dedusted of 95% | |||||||||
自控仪表 automatic control meters and instruments | 热风温度及排风温度指标，自动调节温控仪 indicator of not air and exhaust air temperature | |||||||||
进风温度 temperature of air inlet (℃) | 150-200 | |||||||||
出风温度 temperature of air outlet (℃) | 80-100 | |||||||||
外形尺寸 overal diimensions (mm) | 长L | 5000 | 5500 | 7000 | 8000 | 9800 | 11000 | 12200 | 14100 | 15000 |
| 宽W | 3000 | 3500 | 4000 | 5000 | 5700 | 6200 | 7000 | 7800 | 9000 | |
| 高H | 4500 | 4600 | 5200 | 6500 | 7600 | 8100 | 9000 | 9850 | 11100 | |
所有参数仅作参考，视物料情况，本公司拥有变更权利，并不另行通知。
All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!
