| 常州市佳发制粒干燥设备有限公司
主营产品： 干燥造粒 |
| 常州市佳发制粒干燥设备有限公司
主营产品： 干燥造粒 |
| 参考价 | 面议 |
应用概述 General of applications
★由螺旋的公.自转使物料在锥体内产生复合运动，主要产生四种运动形式：
1.螺旋沿壁公转，使物料沿锥壁作圆周运动；
2.螺旋自转使物料自锥底沿螺旋上升；
3.螺旋的公.自转复合运动使一部分物料被吸收到螺旋圆柱面内同时受螺旋自转的离心力作用使螺旋圆柱面内的一部分物料向锥体径向排放；
4.上升的物料受自身重力作用下降。四种运动在混合机内产生对流.剪切.扩散.从而达到快速均匀混合的目的。
★应用于化工、医药、农药、染料、石油、冶金、建材等粉体与粉体（固-固）、粉体与液体（固-液）、液体与液体（液-液）混合、反应、干燥、冷却。
★The material is made to conduct a compound motion in the cone because of the rotation and revolution of the screws. The effected motions include:
1.The revolution of the screw along the wall making the material conduct a circumferential motion;
2.The rotation of the screw making the material rise along the screw from the cone bottom;
3.The compound motion of the rotation and revolution of the screws making partial, material be absorbed into the screw cylindroid meanwhile, under the action of centrifugal force, the partial material in the screw cylindroid discharges radially.
4.The rised material drops under its sole weight. The four kinds of motions effect convection, shearing,diffusion in the cone, thus quick and even mixing can be achieved.
★It is suitable for chemical industry, pharmaceutical industry pesticide, dyestuff, petroleum industry, metallurgical industry, construction material and etc. Such as in the mixing, reaction, drying, cooling of powder and powder(solid-solid), powder and liguid(solid-liguid), liguid and liguid(liguid-liguid).
设备特点 Features of equipment
★可加装飞刀，喷淋雾化装配，满足特殊工艺要求。
★出料阀有手动，气动两种方式。
★特殊物料可加大电机功率（加重型）。
★This model of machine can be equipped with single screw, double screws, triscrews.
★It can be equipped with flyingenttder additionally, so as to meet the requirements for special technology.
★The discharge valve adopts two ways, one is manual or the other is pheumatical.
★The power of motor can be enlarged for special material(strengthening type).
型号 Type | 全容积 Total volume(m3) | 装载系数 Load factor | 装机功率 Equipped power(Kw) | 操作条件 Opetating conditions | 外形尺寸 Overall dimensions (mm) | 重量 Weight(Kg) |
| DSH-0.1 | 0.1 | ≤0.6 | 0.5 | 常温常压粉尘密封 | 1569×Ø702 | 250 |
| DSH-0.3 | 0.3 | ≤0.6 | 2.2 | 常温常压粉尘密封 | 1929×Ø920 | 550 |
| DSH-0.5 | 0.5 | ≤0.6 | 3 | 常温常压粉尘密封 | 2322×Ø1124 | 660 |
| DSH-1.0 | 1.0 | ≤0.6 | 4 | 常温常压粉尘密封 | 2869×Ø1480 | 1200 |
| DSH-1.5 | 1.5 | ≤0.6 | 5.5 | 常温常压粉尘密封 | 3140×Ø1633 | 1350 |
| DSH-2.0 | 2.0 | ≤0.6 | 5.5 | 常温常压粉尘密封 | 3489×Ø1816 | 1500 |
| DSH-3.0 | 3.0 | ≤0.6 | 7.5 | 常温常压粉尘密封 | 3747×Ø2210 | 2300 |
| DSH-4.0 | 4.0 | ≤0.6 | 11 | 常温常压粉尘密封 | 4362×Ø2280 | 2520 |
| DSH-5.0 | 5.0 | ≤0.6 | 15 | 常温常压粉尘密封 | 4576×Ø2402 | 3000 |
| DSH-6.0 | 6.0 | ≤0.6 | 15 | 常温常压粉尘密封 | 4900×Ø2582 | 3150 |
| DSH-8.0 | 8.0 | ≤0.6 | 18.5 | 常温常压粉尘密封 | 5400×Ø2800 | 4500 |
| DSH-10 | 10 | ≤0.6 | 20.7 | 常温常压粉尘密封 | 5795×Ø3018 | 5500 |
| DSH-15 | 15 | ≤0.6 | 24.2 | 常温常压粉尘密封 | 6475×Ø3450 | 6600 |
| DSH-20 | 20 | ≤0.6 | 41 | 常温常压粉尘密封 | 7535×Ø3805 | 7000 |
| DSH-25 | 25 | ≤0.6 | 41 | 常温常压粉尘密封 | 7995×Ø4078 | 8500 |
| DSH-30 | 30 | ≤0.6 | 52.5 | 常温常压粉尘密封 | 8385×Ø4330 | 9200 |
所有参数仅作参考，视物料情况，本公司拥有变更权利，并不另行通知。
All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!
