上海凡而阀门有限公司

主营产品: 球阀、针型阀、截止阀、闸阀、止回阀、蝶阀、阻火器、排气阀、排泥阀、过滤器、放料阀、隔膜阀、安全阀、旋塞阀、手机:13917909444

您现在的位置: 上海凡而阀门有限公司>>进口>> 美国泰乐进口罗茨风机|美国进口罗茨风机

公司信息

人:
苏生
址:
上海市徐汇区龙漕路51号13917909444
编:
200235
铺:
https://www.zyzhan.com/st68399/
给他留言
美国泰乐进口罗茨风机|美国进口罗茨风机
进口罗茨风机|美国进口罗茨风机
参考价 面议
具体成交价以合同协议为准
  • 型号 美国泰乐
  • 品牌
  • 厂商性质 代理商
  • 所在地 上海

联系方式:苏生查看联系方式

更新时间:2017-02-28 14:12:48浏览次数:468

联系我们时请说明是制药网上看到的信息,谢谢!

【简单介绍】
进口罗茨风机美国罗茨风机

进口罗茨风机工作原理:
罗茨风机为容积式风机,输送的风量与转数成比例三叶型叶轮每转动一次由2个叶轮进行三次吸排气,气体脉动性小,振动小,噪音也低。风机2根轴上的叶轮与椭圆形壳体内孔面,叶轮端面和风机前后端盖之间始终保持着微小的间隙,在同步齿轮的带动下风从风机进风口沿壳体内壁输送到排出的一侧。风机内腔不需要润滑油,结构简单,运行平稳,性能稳定,适应多种用途,以运用于广泛的
【详细说明】

进口罗茨风机|美国进口罗茨风机

 

进口罗茨风机工作原理:

罗茨风机为容积式风机,输送的风量与转数成比例三叶型叶轮每转动一次由2个叶轮进行三次吸排气,气体脉动性小,振动小,噪音也低。风机2根轴上的叶轮与椭圆形壳体内孔面,叶轮端面和风机前后端盖之间始终保持着微小的间隙,在同步齿轮的带动下风从风机进风口沿壳体内壁输送到排出的一侧。风机内腔不需要润滑油,结构简单,运行平稳,性能稳定,适应多种用途,以运用于广泛的领域。罗茨风机的特性由于采用了三叶转子结构形式,及合理壳体进内进出风口出的结构,所以风机振动小噪声低,叶轮和轴为整体结构且叶轮无磨损,风机性能持久不变,可以*连续运转。

 

进口罗茨风机安装要求:

风机在不大于40°C的环境温度下,可*使用。在夏季时,应安装排气扇等降温措施,以提高风机的使用寿命。

 

进口罗茨风机应用领域:

污水曝气  净水厂  过滤器逆洗   真空除尘   物料输送

广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域,以及人们日常生活中。上海意蝶产品全国各地,优质的质量,高效的服务,深得用户的信赖和广泛的赞誉。

 

进口罗茨风机技术参数:

压力:9.8-98kpa
风量:0.49-261.9m3/min
转速:590-2100r/min
功率:0.75kw-560kw
口径:50-3500mm

 

进口罗茨风机运行条件:

1、输送介质的进汽温度通常不得大于 40

2、介质中微粒的含量不得超过 100mg/m3,微粒zui大尺寸不得超过zui小工作间隙的一半。

3、运转中轴承温度不得高于 95,润滑油温度不高于 65

4、使用压力不得高于铭牌上规定的升压范围。

5、罗茨鼓风机叶轮与机壳、叶轮与侧板、叶轮与叶轮间隙出厂时已调好,重新装配时要保证该间隙。

6、罗茨鼓风机运行时,主油箱、副油箱油位必须在油位计两条红线之间。

进口罗茨风机美国泰乐TYLER售后服务:

*的服务铸就*的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中,如出现与合同要求不符时,我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期,时间从验收合格之日起计算。
4、在正确安装和使用下,出现产品质量问题,本公司将负责到底。

 

The United States imported roots blower roots blower

The working principle of imported roots blower:

Blower for volume blower, air transport and rotation is proportional to the trefoil impeller rotating each time by 2 to three times the impeller suction exhaust gas pulsation of small, small vibration, low noise. Fan impeller on 2 axes and oval shell hole surface, impeller end and the fan cover has always maintained a small gap between, on one side of the synchronous gear drives the wind from the fan inlet along the inner wall of the shell is transported to the discharge. The inner cavity of the fan does not need lubricating oil, the structure is simple, the operation is stable, the performance is stable, and the utility model is suitable for various purposes, and can be used in a wide range of fields. The characteristics of Roots blower with three rotor structure, and reasonable housing into the inner structure of import air outlet, so the fan small vibration and low noise, the impeller and shaft for the overall structure and the performance of the fan impeller wear free, persistent, can be long-term continuous operation.

Imported roots blower installation requirements:

Fan in the environment temperature of not more than 40 degrees C, can be used for a long time. In the summer, the exhaust fan should be installed and other cooling measures to improve the service life of the fan.

Imported roots blower application:

Sewage aeration water purification plant filter backwash vacuum dust removal material conveying

Widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life. Shanghai Yi butterfly products sell well all over the country, high quality, efficient service, won the trust of users and a wide range of praise.

Imported roots blower technical parameters:

Pressure: 9.8-98kpa

Air volume: 0.49-261.9m3/min

Speed: 590-2100r/min

Power: 0.75kw-560kw

Caliber: 50-3500mm

Imported roots blower operating conditions:

The inlet temperature of 1, the transmission medium is usually not more than 40 DEG C.

The content of particles of 2 medium shall not exceed 100mg/m3, the maximum particle size should not exceed half of the minimum clearance.

3, the bearing temperature in operation shall not exceed 95 DEG C, the lubricating oil temperature is not higher than 65 DEG C.

4, shall not exceed the use of pressure boosting range specified on the nameplate.

5, roots blower impeller and casing, impeller, impeller and impeller clearance and side plate factory tuned, re assembly to ensure the gap.

6, roots blower operation, the main oil tank, fuel tank level must be two red line on the oil level between.

The United States imported roots blower tylosin TYLER customer service service:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.



产品对比 二维码

扫一扫访问手机商铺

对比框

在线留言