进口叶片泵｜美国进口叶片泵

进口叶片泵特点：

1子母叶片的结构设计，减少了叶片对定子的冲击，在较高的工作压力和高转速下，性能更稳定，寿命更长。

2、子母叶片结构本身具有低噪音的特性。12叶片的设计、流量脉动很小，噪音更低。

3、多排量的选择。以及泵芯的插装式结构，使用户使用更灵活，维修更方便。

进口叶片泵概述：

叶片泵转子旋转时，叶片在离心力和压力油的作用下，尖部紧贴在定子内表面上。这样两个叶片与转子和定子内表面所构成的工作容积，先由小到大吸油后再由大到小排油，叶片旋转一周时，完成一次吸油与排油。

进口叶片泵工作原理：

它的作用原理和单作用叶片泵相似，不同之处只在于定子表面是由两段长半径圆弧、两段短半径圆弧和四段过渡曲线八个部分组成，且定子和转子是同心的。在图示转子顺时针方向旋转的情况下，密封工作腔的容积在左上角和右下角处逐渐增大，为吸油区，在左下角和右上角处逐渐减小，为压油区；吸油区和压油区之间有一段封油区把它们隔开。这种泵的转子每转一转，每个密封工作腔完成吸油和压油动作各两次，所以称为双作用叶片泵。泵的两个吸油区和两个压油区是径向对称的，作用在转子上的液压力径向平衡，所以又称为平衡式叶片泵。

进口叶片泵技术参数：

流量：8-40L/min  压力：3.5-7.0MPa 转速：800-1800r/min
驱动功率：0.7-5.8kw  配管尺寸：进口：1、1 1/2 出口：3/4、1 1/4

进口叶片泵美国泰乐TYLER售后服务：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

Inlet vane pump

Inlet vane pump features:

1 structural design of vane, blade is reduced to stator impact in high pressure and high speed, more stable performance, longer life.

2, characteristics of composite vane structure itself has low noise. 12 blade design, flow pulsation is very small, lower noise.

3, the choice of multi displacement. As well as the pump core plug-in structure, so that users use more flexible, more convenient maintenance.

Introduction of imported vane pump:

When the vane pump rotates, the blade is attached to the inner surface of the stator under the action of centrifugal force and pressure oil. The working volume of two rotor blades and the inner surface of the stator and the first increase after absorbing from large to small oil, rotating blades of a week, a row of oil and oil.

Inlet vane pump working principle:

The principle and function of the single action vane pump which is similar, the only difference is that the surface of the stator is composed of eight parts and two long, two short radius arc radius of the arc and four transition curve, and the stator and rotor are concentric. In this case the rotor turns clockwise, the volume of the sealing chamber in the upper left corner and lower right corner increases gradually, as oil area, in the lower left and upper right corners decreases gradually, as pressure oil; oil pressure oil between the area and a sealing oil to separate them. The rotor of the pump rotates every turn, and each working chamber is sealed for two times of oil absorption and oil pressure action. Two suction pump and two pressure zone area is radially symmetric, the radial equilibrium fluid pressure acting on the rotor, so called balanced vane pump.

Technical parameters of inlet vane pump:

Flow rate: 8-40L/min pressure: 3.5-7.0MPa speed: 800-1800r/min

Drive power: 0.7-5.8kw size: 1, 1: Import Export: 3/4, 1 1/4 1/2

The United States imported vane pump TYLER Taylor customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.