进口铸钢气动隔膜泵美国铸钢气动隔膜阀

进口铸钢气动隔膜泵概述：

即能抽送流动的液体，又能输送一些不易流动的介质，具有自吸泵、潜水泵、屏蔽泵、泥浆泵和杂质泵等输送机械的许多优点。

The flow of liquid can be pumped, and easy to transport some of the flow medium, has many advantages such as self suction pump, submersible pump, shield pump, pump mud and impurities such as transportation machinery.

进口铸钢气动隔膜泵特点：

1、不需灌引水，吸程高达7m，扬程达50m，出口压力≥6kgf/cm2; 
2、流动宽敞，通过性能好，允许通过zui大颗粒直径达10mm。抽送泥浆、杂质时，对泵磨损甚微; 
3、扬程、流量可通过气阀开度实现无级调节（气压调节在1-7kgf/cm2之间）; 
4、该泵无旋转部件，没有轴封，隔膜将抽送的介质与泵的运动部件、工作介质*隔开，所输送的介质不会向外泄漏。所以抽送有毒、易发挥或腐蚀性介质时，不会造成环境污染和危害人身安全; 
5、不*电，在易燃、易爆场所使用安全可靠; 

6、可以浸没在介质中工作; 

进口铸钢气动隔膜泵技术参数：

流量：0-30m3/h； 扬程：0-50m； 口径：10-100mm；

温度：-15-+120℃； 压力：0.1-0.7MPa； 自吸高度：5-7m。

进口铸钢气动隔膜泵工作原理：

当压缩气体进入配气阀，配气阀会将压缩气体压入泵其中一腔从而推动隔膜片运动挤压液体流出，然而泵的另一腔泵因为被拉出而吸入液体。当隔膜片到达终点，配气阀机构自动将压缩空气引入泵腔另一端，推动隔膜片朝相反方向运动，从而使两个两个隔膜片在泵体的两个腔做往复运动抽动液体流动。

进口铸钢气动隔膜泵应用领域：

1、气动隔膜泵可以吸花生酱、泡菜、土豆泥、小红肠、果酱苹果浆、巧克力等。
2、塑料气动隔膜泵可以用于吸油漆、树胶、颜料。
3、粘合剂和胶水、全部种类可用泵吸取。
4、各种瓦、瓷、砖器及陶器釉浆。
5、油井钻好后，用气动隔膜泵吸沉积物及灌浆。
6、吸各种乳剂和填料。

进口铸钢气动隔膜泵美国泰乐TYLER售后服务：

用户第1，信誉第1，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

Imported cast steel pneumatic diaphragm pump

Introduction of imported cast steel pneumatic diaphragm pump:

The flow of liquid can be pumped, and easy to transport some of the flow medium, has many advantages such as self suction pump, submersible pump, shield pump, pump mud and impurities such as transportation machinery.

The flow of liquid can be pumped, and easy to transport some of the flow medium, has many advantages such as self suction pump, submersible pump, shield pump, pump mud and impurities such as transportation machinery.

Characteristics of imported cast steel pneumatic diaphragm pump:

1, without irrigation water, suction lift up to 7m, the head of 50m, the outlet pressure is greater than or equal to 6kgf/cm2;

2, flow spacious, through good performance, allowing the maximum particle diameter of up to 10mm. Pumping mud and impurities, little wear on the pump;

3, head, flow through the valve open to realize stepless adjustment (pressure adjustment between the 1-7kgf/cm2);

4, the pump has no rotary parts, no seals, moving parts, working medium diaphragm pumping medium and pump compley separated, the transmission medium does not leak out. Pumping so toxic and flammable or corrosive media, it will not cause environmental pollution and harm personal safety;

5, do not have electricity, in inflammable and explosive places safe and reliable;

6, can be immersed in medium;

Technical parameters of imported cast steel pneumatic diaphragm pump:

Flow rate: 0-30m3/h; head: 0-50m; diameter: 10-100mm;

Temperature: -15-+120 DEG C; pressure: 0.1-0.7MPa; self suction height: 5-7m.

The working principle of imported cast steel pneumatic diaphragm pump:

When the compressed gas enters the valve, the valve will be compressed gas into the cavity of the pump pressure to drive the diaphragm to move the squeeze out of the liquid, but the other pump cavity pump was pulled out of the liquid. When the diaphragm reaches the end point, valve mechanism automatically compressed air into the pump cavity and the other end, push the diaphragm in the opposite direction, thus making the two two diaphragm reciprocating motion in the two chamber of the pump body with liquid flow.

Application of imported cast steel pneumatic diaphragm pump:

1, pneumatic diaphragm pump can suck peanut butter, pickles, mashed potatoes, red sausage, jam apple syrup, chocolate, etc..

2, plastic pneumatic diaphragm pumps can be used for absorbing paint, gum and pigment.

3, adhesive and glue, all kinds of pumps can be used.

4, all kinds of tile, porcelain, brick and pottery glaze.

5, the oil well drilling, the use of pneumatic diaphragm pump sediment and grouting.

6, absorb all kinds of emulsion and filler.

The United States imported steel pneumatic diaphragm pump Taylor TYLER customer service service:

First users, first credit, quality, perfect customer service service is an important guarantee for extending our products and value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.