进口潜水深井泵美国潜水深井泵

进口潜水深井泵技术参数：

尺寸：6英寸—12英寸 流量：5—600立方/小时

扬程：6—600米 功率：3—250千瓦

电源：电压380V+5%，频率50Hz+1%赫兹，三相交流电。

生产标准：NEMA标准。

进口潜水深井泵概述：

潜水深井泵的电机为密闭充水湿式结构。电机定子绕组采用耐水的聚乙烯绝缘，尼龙护套多层结构的电磁线。导轴承及推力轴承均采用水润滑材质。电机内部充满清水，用以冷却电机和润滑轴承。电机底部装有调压膜，用以调整由电机温升引起的机体内清水的胀缩压差。电机的上端轴上装有防砂机构，用来阻止水中泥砂进入机体内部。

进口潜水深井泵工作原理：

是从井中提水的叶片泵，长轴深井泵是深井泵中应用较为广泛的一种泵，一般多用于机井。深井泵主要由三部分组成：zui上面的是电动机，装在井口地面上中间的是输水管和传动轴下端为深井泵的工作部分，淹没在井水面以下。由于井深，要求扬程较大，长轴深井泵的扬程范围一般为15～17 m。深井泵可分为分段式多级立式离心泵。根据深井泵的结构特点，进行正确的使用和及时排除故障现象，对保证深井泵的安全运行，延长其使用寿命都是至关重要的。

进口潜水深井泵美国泰乐TYLER售后服务：

*的服务铸就*的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。

Submersible deep well pump

Technical parameters of imported submersible deep well pump:

Size: 6 inches - 12 inches flow: 5 - 600 cubic meters / hour

Head: 6 - 600 m power: 3 - 250 kw

Power supply: voltage 380V+5%, frequency 50Hz+1% Hz, three-phase alternating current.

Production standard: NEMA standard.

Introduction of imported submersible deep well pump:

The motor of the submersible deep well pump is closed and filled with wet structure. The stator winding of the motor is made of water resistant polyethylene insulation, and the electromagnetic wire of nylon sheath multilayer structure. Guide bearings and thrust bearings are lubricated with water. The motor is filled with water to cool the motor and the bearing. The motor is arranged at the bottom of the pressure adjusting membrane, to adjust the motor temperature rise caused by the expansion and contraction of the water pressure difference. The upper shaft of the motor is provided with a sand prevention mechanism for preventing the mud and sand from entering into the inner part of the machine body.

Working principle of imported submersible deep well pump:

Is the vane pump water from wells, long axis deep well pump is a pump is widely used in deep well pump, generally used for wells. Deep well pump is mainly composed of three parts: the top of the motor is installed on the wellhead in the middle of the water pipe and the lower end of the drive shaft is part of the deep well pump, submerged in the water below the well. Because of the deep well, the required lift is larger, the long axis deep well pump lift range is generally 15 ~ 17 M. Deep well pump can be divided into multistage vertical centrifugal pump. According to the structural characteristics of the deep well pump, it is very important to ensure the safe operation of the deep well pump and prolong its service life.

The United States imported submersible deep well pump TYLER Taylor customer service service:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.

进口潜水深井泵guan网：http://www.twvalve。。ｎｅｔ/html/2340.html