进口潜水深井泵

进口潜水深井泵 进口潜水深井泵厂家 价格

Diving deep well pump

德国KAYSEN凯森进口潜水深井泵概述：
1、潜水深井泵为离心式或混流式；采用水润滑轴承；与电机的联接采用联轴器刚性联接。深井泵叶轮在电机带动下旋转产生离心力，使液体能量增加经泵壳的导流作用进行提水。在水泵上端设有逆止阀体，防止电泵停机时，因扬水管中倒流的水损坏工作部件。阀上有泄水孔，可将管路中的水缓缓放掉，防止冬天冻裂管路。 (注：低扬程潜水泵不设逆止阀体)
2、潜水深井泵的电机为密闭充水湿式结构。电机定子绕组采用耐水的聚乙烯绝缘，尼龙护套多层结构的电磁线。导轴承及推力轴承均采用水润滑材质。电机内部充满清水，用以冷却电机和润滑轴承。电机底部装有调压膜，用以调整由电机温升引起的机体内清水的胀缩压差。电机的上端轴上装有防砂机构，用来阻止水中泥砂进入机体内部。
3、潜水深井泵的管路部分：用以联接电泵使其吊装在机井中，将水输送到地面上去。主要由短输水管、输水管、弯管、夹板等部件组成。短输出管是输水管路与电泵的连接过渡部件。弯管安装在井口处，以改变水流的传送方向。夹板是在深井泵的安装过程中吊装和固定输出管路。

主要优点：

●具有结构简单

●机组效率高

●噪音小

●运行安全可靠

●安装维修方便的优点

主要应用：

具有结构简单，机组效率高，噪音小，运行安全可靠，安装维修方便的优点。它适用于从深水井，热水井及海洋提取，也可用于河流、水库、水渠等提取；

主要用于农田灌溉及高原山区的人畜用水，亦可供城市、工厂、铁路、矿山、工地供排水使用。

主要特点：

●结构简单，节省原材料。

●电机、水泵—体，潜入水中运行，安全可靠。

●对井管无特殊要求，对输水管只要能承受相应压力即可。

●安装使用维护方便简单，占地面积小，不需建造泵房。

技术参数：

●尺寸：6英寸—12英寸

●流量：5—600立方/小时

●扬程：6—600米

●功率：3—250千瓦

●电源：电压380V+5%，频率50Hz+1%赫兹，三相交流电。

●生产标准：NEMA标准。

Germany KAYSEN imported diving deep well pump Overview:
1, diving deep well pump for centrifugal or mixed flow; use of water lubricated bearings; coupling with the motor using a rigid coupling coupling. Deep well pump impeller driven by the rotation under the centrifugal force, so that the liquid energy increased by the pump casing diversion effect of water. In the upper part of the pump with a check valve body to prevent the pump down, because the water pipe in the back of the water damage to the working parts. The valve has a drain hole, the water in the pipeline can be slowly released to prevent the winter freezing pipe. (Note: low-lift submersible pump does not set the valve body)
2, submersible deep well pump motor for the closed water filling wet structure. Motor stator windings are made of water resistant polyethylene insulated, nylon sheaths with multi-layer structure of the magnet wire. Guide bearings and thrust bearings are made of water lubrication material. The motor is filled with water to cool the motor and lubricate the bearings. The bottom of the motor is equipped with a pressure regulating film to adjust the expansion and contraction pressure of the water in the body caused by the temperature rise of the motor. The upper shaft of the motor is equipped with a sand control mechanism to prevent the mud from entering the body.
3, diving deep well pump part of the pipeline: to connect the pump to lift it in the machine, the water transported to the ground. Mainly by the short water pipes, water pipes, elbow, plywood and other components. The short outlet tube is the connection between the water supply line and the pump. The elbow is installed at the wellhead to change the direction of water flow. The splint is the lifting and fixing of the output pipe during the installation of the deep well pump.

Key Benefits:

● has a simple structure

● High efficiency of the unit

● low noise

● safe and reliable operation

● easy installation and maintenance advantages

main application:

With a simple structure, high efficiency unit, low noise, safe and reliable operation, easy installation and maintenance advantages. It is suitable for extraction from deep wells, hot water wells and oceans, and can also be used for extraction of rivers, reservoirs and drains;

Mainly used for farmland irrigation and mountainous areas of human and animal water, but also for cities, factories, railways, mines, site for water use.

main feature:

● Simple structure, saving raw materials.

● motor, pump - body, submerged into the water to run, safe and reliable.

● There is no special requirement for the well pipe, as long as the water pipe can withstand the corresponding pressure can be.

● easy installation and maintenance easy to use, small footprint, no need to build pump room.

Technical Parameters:

● Size: 6 inches to 12 inches

● Flow: 5-600 cubic meters per hour

● Head: 6-600 meters

● Power: 3-250 kW

● Power: voltage 380V + 5%, frequency 50Hz + 1% Hz, three-phase AC.

● Production standards: NEMA standards.

厂家 价格

德国KAYSEN凯森对您的承诺：

●放心的质量：从铸件到产品，实行全过程质量监控，*检测，责任到人！

●贴心的价格：高效成本控制，自产自销，减少中间环节，让利于客户！

●快速的货期：充足的库存，上海便捷物流，缩短交货期，严格按照合同期交货！

Germany Kaysen commitment to you:

● Reliable quality: from casting to the product, the implementation of the whole process of quality control, all-round detection, responsibility to the people!

● intimate price: efficient cost control, production for sale, to reduce the intermediate links, to help customers!

● fast delivery: adequate inventory, Shanghai convenient logistics, shorten the delivery time, in strict accordance with the contract delivery!

厂家 价格