德国Helmut Diebold GmbH & Co.热收缩单元

德国Heinzinger电源

Steel or stainless steel oil tanks

德国HAUHINCO高压泵

德国halstrup-walcher GmbH定位器

Automatic format change in machine building

.

:王工
同号
      449147851
价注意事项：
       1.请发书面询价函（邮件，，传真等），不接受口头报价。
       2.如果型号不能*对上，请提供英文品牌名+具体型号+数量。
       3.询价的商友请主动告知公司名称和，谢谢。

Your customers expect you to present highly flexible machine solutions with minimum changeover time lags. Each new format must be adjusted automatically within little time – similar to a triathlete whose ranking depends on how quickly she changes over from one discipline to the next. You want the design flexibility of positioning systems that communicate via each relevant bus system, including popular ethernet based buses? You want positioning systems that offer Condition Monitoring giving maximum machine availability to your customer.

halstrup-walcher offers high performance positioning systems with all features needed in modern machine design. One of our strengths is to create customer specific solutions in highly compact housings. Quickly.

.

• PSE 441

  

  • Positioning system with RS485 - data interface
  • absolute measuring system
  • compact solution including EC motor, gear, controller, absolute measuring system and interface
  • Joy key operation for manual assembly processes

  Add item to watch list

  Datenblatt_PSE 441

  Special features
  Nominal torque /Nominal rated speed	1,5 Nm / 40 U/min
  Self-holding torque	2,5 Nm /10 rpm
  output shaft	10 mm solid circular shaft with feather key
  Motor type	Stepping motor
  Data interface	RS485

  Product details

• PSE 37_/39_-14

  

  • Positioning system with CANopen, Profibus or Industrial Ethernet interface
  • Absolute measuring system
  • Position control for direct connection to a control module
  • Design in V4A stainless steel housing with high protection class IP68

  Add item to watch list

  Data sheet

  Special features
  Nominal torque/ nominal rated speed	1...5 Nm / 50...180 rpm
  Self-holding torque	1/2 nominal torque
  Output shaft	14 mm hollow shaft, 10 mm External square
  Motor type	EC- Motor
  Data interface	CANopen, DeviceNet, Profibus DP, EtherCAT, sercos
  Brake	Optional hand brake

  Product details

• PSE 37_/39_-8/-14 RD

  

  • Positioning system with CANopen, Profibus or Industrial Ethernet interface

  • Absolute measuring system

  • Position control for direct connection to a control module.

  • Hygienic design in V4A stainless steel housing with high protection class IP68

  Add item to watch list

  Data sheet

  Special features
  Nominal torque/ nominal rated speed	1..5 Nm / 35...180 rpm
  Self-holding torque	1/2 nominal torque
  Output shaft	8/14 mm hollow shaft, 10 mm external square
  Motor type	EC - Motor
  Data interface	CANopen, DeviceNet, Profibus DP, EtherCAT, sercos
  Brake	Not applicable

  Product details

• PSE 37_-8

  

  • Positioning system with CANopen, Profibus or Industrial Ethernet interface
  • Absolute measuring system
  • Position control for direct connection to a control module
  • Design in V4A stainless steel housing with high protection class IP68
  • Longitudinal mounting

  Add item to watch list

  Data sheet

  Special features
  Nominal torque/ nominal rated speed	1...5 Nm / 35...180 rpm
  Self-holding torque	1/2 nominal torque
  Output shaft	8 mm hollow shaft, 10 mm external square
  Motor type	EC- Motor
  Data interface	CANopen, DeviceNet, Profibus DP, EtherCAT, sercos
  Brake	not applicable

EHP-3K 50, 60, 70

Characteristics:

• Triplex Plunger Pump
• designed for industrial applications
• available as Flange- and Foot-type
• max. input power 49, 62, 70 kW
• max. input speed n=1500 1/min

Type

EHP-3K 50


EHP-3K 60


EHP-3K 70

Plunger ⌀ 
[in mm]
32
40

32
40

32
40

max in l/min

51
80

65
101

73
115

max. in bar

500
330

500
330

500
330

Type and delivery extent for HBE standard

• Materials S235JR (St37), 1.4301 (V2A) resp. 1.4571 (V4A)
• Sandblasted and grounded inside and outside resistant to hydraulic oil on mineral oil base or sandblasted inside and outside with glass beads
• Leak test by two colour check
• Gasket 15 x 5 mm made of Perbunan (NBR) in case of screwed tank lid
• Drain plug DIN 908 + Cu gasket for oil drain at the tank

Available for extra charge

• Numerous accessories of HBE delivery programme, such as cleaning-covers, gaskets, oil level gauges, fillers etc.
• Individual machining of tank, tank lid or oil sumps
• Final varnish
• Primary coat resistant to special media (please see resistance schedule)
• Density certificate

Download

Catalog (PDF 1.76 MB, Updated: 09/10)

 

Aluminium oil tanks

General information

• Tank sizes from 3.5 to 70 litres
• All aluminium tank sizes are stackable, thus low freight cost and space saving storage
• Stable casted body with good heat dissipation by material aluminium and all-round fluting
• AB 30 – AB 70 available with feet or castors alternatively
• Flat gasket made of rubber cork between tank lid and tank for AB 3.5 – AB 20
• Toroidal sealing ring (endless, without contact spot) 6 mm ø NBR for AB 30 – AB 70
• Tank lid for all sizes according to customer's drawing (coating included, if desired)
• All tank sizes incl. standard accessories ex stock

LNC-Series, New Generation

High voltage laboratory power supply

  top

• high voltage laboratory power supply, compact bench case
• output voltage up to 30.000 Volt
• output current up to 500 mA
• residual ripple < 0,1% pp
• stability < 0,1% over 8h
• preset function
• setting of output voltage with ten-turn potentiometer
• setting of output current with ten-turn potentiometer
• 3.5-digit digital displays for voltage
• and current, analogue displays on request
• analog interface
• external digital interface avalible as option
• sustained short-circuit resistant

 LNC datasheet (PDF)

PNC - Series

High-voltage power supplies, precision universal power supply

  top

• precision HV power supply
• output voltage up to >300.000 Volt
• output current up to 3.000 mA (high performance see PNC3p)
• residual ripple < 0,01% pp, as PNChp up to 0,001%pp
• stability < 0,01% over 8h
• setting of output voltage with ten-turn potentiometer
• setting of output current with ten-turn potentiometer
• 3.5-digit digital displays for voltage and current, analogue displays on request
• analog interface
• digital interface avalible as option
• external HV On/Off via stand-by input
• polarity reversal as option
• sustained short-circuit resistant

 PNC datasheet (PDF)

PNC3p - Series

High-voltage, precision power supply up to 6kW

  top

• precision switch mode HV power supply
• output voltage up to 60.000 Volt
• output current up to 10.000 mA
• residual ripple < 0,01% pp, as PNChp up to 0,001%pp
• stability < 0,01% over 8h
• setting of output voltage with ten-turn potentiometer
• setting of output current with ten-turn potentiometer
• 3.5-digit digital displays for voltage and current, analogue displays on request
• analog interface
• digital interface avalible as option
• external HV On/Off via stand-by input
• polarity reversal as option
• sustained short-circuit resistant

 PNC3p datasheet (PDF)

PNChp-Series

High precision high voltage power supply

  top

• switch mode HV power supply for high precision
• output voltage up to >300.000 Volt
• output current up to 10.000 mA
• residual ripple < 0,001% pp
• stability < 0,001% over 8h
• setting of output voltage with ten-turn potentiometer
• setting of output current with ten-turn potentiometer
• 3.5-digit digital displays for voltage and current, 4.5 digit displays on request
• analog interface
• digital interface 16 bit avalible as option
• external HV On/Off via stand-by input
• polarity reversal as option
• sustained short-circuit resistant
• available for the most PNC and PNC3p types

 PNChp datasheet (PDF)

PNCcap-Series

High voltage capacitor charging power supply

  top

• high voltage capacitor charging unit
• for capacitor charging and conditioning
• output voltage up to 60.000 Volt
• charging capacity up to 3.000 J/s
• stability < 0,01% over 8h
• regelbare Ladespannung über Zehngang-Potentiometer
• setting of charging current with ten-turn potentiometerr
• 3.5-digit digital displays for voltage and current, analogue displays on request
• analog interface
• continuous or triggered charge mode can be selected
• start charging with external signal possible

 PNCcap datasheet (PDF)

Diebold - Shrink Units

More than 12 years ago Diebold started its ShrinkFit technology when presenting the first contact shrink unit, a milestone in modern ShrinkFit technology. Then we developed Inductive Shrink units and today we offer 10 different leading edge technology inductive ShrinkFit units. Another very popular product is our patented chiller unit FKS 03, for flexible cool-down of hot tools after the inductive shrink process.

The brand ThermoGrip™ stands for our technological know-how in ShrinkFit technology. The ThermoGrip™-group was founded in 2001 by the German companies Bilz, Diebold, Komet and Marquart. Together we develop and market the ThermoGrip™-ShrinkFit products and we share many international patents in ShrinkFit technology.
 

Picture	Type / Description	Info / Media
	MS 502 Micro shrink unit  - The MS 502 is designed for shrinking small tool shanks in small holders - Shrinks standard contour holders up to Ø 16 mm - Even when shrinking mini-tools, the unit will automatically shut off before overheating the tools  - For carbide shanks only: Ø 3 – 16mm for holders with standard nose configuration Ø 3 – 20mm for holders with slim nose configuration
	HS1100 Horizontal inductive shrink unit  Shrink range:  Ø 3 – 32 mm for carbide shanks Ø 6 – 32 mm for HSS shanks - Changeable adaptors HSK 40 to HSK 100 or SK/BT 30 to SK/BT 50 to hold the ShrinkFit toolholders in the shrink position - Manual operation with min./ max. power button - Broken tool removal unit installed in all holder adaptors - Chuck holders available to hold different shrink fit holders  - Optional length setting unit for presetting of the cutters - For cool down of the shrink fit holders we recommend to use our chiller unit FKS03
	ISG 1000 Inductive shrink unit Shrink range: Ø3 – 16 mm for carbide shanks. To shrink all TER Shrink Collet sizes and diameters - Easy Shrink process by push of one button  - Hand operation of the coil  - Patented Shrinking process - Coil allows interchangeable discs for effective shrinking of toolholders and TER collets
	ISG 2200 Inductive shrink unit with an integrated air cooling system  ISG 2200 inductive shrink unit is capable of shrinking carbide tools of diameter  Ø 3 – 20 mm for carbide shanks Ø 6 – 20 mm for standard high- speed steel tools. The coil is moved over the ShrinkFit holder manually. It clamps automatically and after the ShrinkFit process it moves back to its home position. A chiller vent is installed in the base unit.
	ISG 2202 Inductive shrink unit ISG 2200 inductive shrink unit is capable of shrinking carbide tools of diameter: Ø 3 – 20 mm for carbide shanks Ø 6 – 20 mm for HSS shanks The Inductive Shrink Unit that takes advantage of the capabilities of the chiller unit FKS 03. The ISG 2202 does not have air vents as does the ISG 2200. It is designed to be used in conjunction with our chiller unit FKS 03.
	ISG 2200WK Inductive shrink unit with Automatic Cool Down system Shrink range: Ø 3-20 mm for carbide shanks Ø 6 - 20 mm for HSS shanks - Max. tool length allowed in cooling tank is 240 mm - Max. shrink extension 350 mm - Operator does not have any contact with hot tools Advantages of the Cool Down system: - All tool nose contours may be used - No contact between cutting tool and chiller adaptors - No overheating of the holders using shrink-cycles that are installed in the software of the ShrinkFit Unit

 HUGO TILLQUIST AB成立于1895年，在过去的100多年中，HUGO TILLQUIST AB已经为测量和检测市场提供了*的产品。这些年来，我们已取得的经验和诀窍的方式是*的为我们的业务范围内的公司，我们已转化为竞争力的。我们的销售工程师在技术上是非常有能力，为我们的客户，从而节省了时间和金钱。在早期阶段，对于某一个问题，能够提出正确的产品，使决策过程更快。

产品简介：

电流传感器，电压传感器，测量传感器，压力变送器，继电器，控制电路板

cos-phi / phase angle

Transducer with analog output proportional to cos-phi or phase angle in degrees.

部分型号：

LQT50-IVT

LQT50-IVT

I480L-154

VU400L-154

Q400-054

U400L-153

TZ41 4-20MA/4-20MA

VR402L-153 AC-supply 220V

HSW源于1921年Georg Andreas Henke创立了一个经营医疗技术的公司，在Tuttlingen的一个地下室里生产出*个产品，后来的医疗技术云集在Tuttlingen这个镇。刚开始Henke着HSW艰难的前进。50年代后，该公司得到迅速发展。1956年，在Tuttlingen建立了工厂。2008年开始生产注射器和套管。1960年Georg A. Henke开始投入内窥镜生产。1965年American mixed conglomerate Litton Industries接管了该公司数十年。1976年，Jochen Busch收购了HSW，Jochen Busch也就是现在的公司所有者。在Busch家族的下，该公司开始致力于医疗内窥镜，注射器和套管的生产。1991年在美国建立了销售和服务部门，这也是该公司拓展的重要一步。目前拥有330名员工。

产品介绍：

Henke-Sass医疗内窥镜、Henke-Sass一次性注射器、Henke-Sass针头、Henke-Sass技术内窥镜、Henke-Sass流量计和Henke-Sass流量开关

常用型号：

Henke-Sass, Wolf GmbH DW-D-AV，553760

Henke-Sass, Wolf GmbH DW-D-15（1/2）

Henke-Sass, Wolf GmbH DW-D-25（1/2）

Henke-Sass, Wolf GmbH DW-D-15（1/2）

Henke-Sass, Wolf GmbH DW-D-25（1/2）