瑞士Contelec AG编码器-尚阶（上海）自动化设备有限公司

参考价	面议

产地	进口	产品新旧	全新

详细介绍

瑞士Conec AG编码器传感器

德国ASensTec GmbH传感器

德国IPR - Inligente Peripherienfür Roboter GmbH工具模块抓手

产品系列：

:王工
同号
      449147851
价注意事项：
       1.请发书面询价函（邮件，，传真等），不接受口头报价。
       2.如果型号不能*对上，请提供英文品牌名+具体型号+数量。
       3.询价的商友请主动告知公司名称和，谢谢。

意大利MoxMec srl气缸抓手

产品系列：

Specifiche Tecniche

MODELLO

ESAE-C-A/B

ESAE-C-C

ESAE-C-D

ESAE-S

ESAE-M

Tipo

Cilindri

Slitte

Motori

Immagine del prodotto

Corsa (mm)

50 - 300

300 - 1.000

Spinta max
(in N)

100

200

500

200

0,6 - 2,5 Nm

Velocità max (mm/s)

400

200

100

300

4.500
giri/min

Ripetibilità (mm)

± 0.1

Rivelazione di posizione

Encoder incrementale

Filetto estremità asta

M10

M14

Capacità di memoria

16 movimenti, ognuno con velocità, accelerazione, posizione ed altro programmabili

Alimentazione

DC24V ± 10% (3 Amp mass.)

Durata

10.000 Km di funzionamento se applicato secondo specifiche tecniche

Protezione

IP-40

IP-20

IP-40

Pesi (Kg)

1 - 1,2

1,6 - 3,1

1,9 - 3,4

3,7 - 10,7

0,64 - 0,87

Funzioni

- posizionamento
- impostazione direzione di zero
- movimento incrementale
- limite fine corsa

- segnale di zona
- segnale posizione raggiunta
- modalità forza spinta
- regolazione guadagno servo

Strumenti di programmazione

Accessori

Applicazioni

ESAE-A-T

Tastiera di programmazione

Programmazione delle posizioni e parametri

ESAE-A-P

Kit di programmazione per PC

Programmazione delle posizioni e parametri da PC

Assi cartesiane X-Y-Z

1. NON NECESSITA DI REGOLAZIONI NELLA BASE

4. NON C'E' SURRISCALDAMENTO

Facile regolazione e taratura della base vibrante senza l'intervento di un esperto. Ideale per cambi produzioni questo grazie anche hai nuovi regolatori digitali che sono programmabili e funzionano a 110 - 220 V 50-60Hz

Gli elementi piezo sono sicuri e non c'è alcun rischio di surriscaldamento o di incendio

2. ALIMENTAZIONE STABILE E COSTANTE

意大利MoxMec srl气缸 抓手 E' garantita un'alimentazione stabile e costante, senza parametri specifici e senza subire interferenze dall'esterno. Adatto per pezzi piccoli, leggeri e per microcomponenti.

5. COMPATTO E DI DIMENSIONI CONTENUTE

意大利MoxMec srl气缸 抓手 Le dimensioni contenute consentono l'utilizzo della base piezo dove l'applicazione dell'alimentatore convenzionale non è fattibile

3. NESSUN EFFETTO MAGNETICO

意大利MoxMec srl气缸 抓手 Grazie all'assenza dei magneti nella base, nessun effetto magnetico è esercitato dall'unità di funzionamento sui pezzi da alimentare ed orientare.

6. IMPORTANTE RISPARMIO ENERGETICO

意大利MoxMec srl气缸 抓手 La base piezo permette una riduzione del consumo energetico pari al 70% e oltre rispetto agli alimentatori elettromagnetici

PIEZO FEEDERS

TIPOLOGIA	ADER CIRCOLARI	ADER LINEARI	ADERAF CIRCOLARI	LINEARI DOPPIO MOVIMENTO
Numero Modelli	7	10	4	5
Peso (Kg)	1,7÷53	0,5÷18	1÷11,8	0,8÷7
Dimensioni (mm)	Ø 90÷390	135÷390	Ø 60÷214	165÷250
Frequenza Vibrazione	60÷255 Hz	60÷182 Hz	60÷400 Hz	60÷400 Hz
Dimensione Tazze (mm)	Ø 100÷800		Ø 60÷400
Lunghezza Canalina (mm)		200÷700		200-400
Senso Scorrimento	Orario / Antiorario	Lineare	Orario / Antiorario	Lineare

BASI VIBRANTI ADER CIRCOLARI

Basi vibranti piezoelettriche circolari sulle quali è possibile montare diversi tipi di contenitori di forma conica, cilindrica e a spirale con diametro da 100mm a 800 mm.

BASI VIBRANTI ADER LINEARI

Basi vibranti piezoelettriche lineari sulle quali viene fissata una canalina sagomata per alimentare ordinatamente i pezzi. Garantiscono un'alimentazione fine e costante dei pezzi provenienti dall'autodistributore circolare, evitando inceppamenti e incastri dei particolari alimentati.

BASI VIBRANTI ADERAF CIRCOLARI

Basi vibranti piezoelettriche circolari ad alta frequenza che, grazie alle micro oscillazioni prodotte dalle balestre piezo, permettono di alimentare microcomponenti con la massima semplicità. Hanno una tolleranza in quota centesimale quindi permettono di montare tazze lavorate a CNC, adatte per selezioni ad alta precisione.

BASI LINEARI CON DOPPIO MOVIMENTO

La particolarità di queste basi vibranti piezoelettriche è data dal doppio movimento con un canale di andata e uno/due di ritorno. Questo permette di effettuare la selezione sul lineare tramite delle canaline lavorate a CNC garantendo un'alta precisione e la ripetibilità della selezione. Particolarmente indicate per l'alimentazione di micro componenti. In queste applicazioni, gli alimentatori circolari fungono da semplici tramogge mentre i pezzi sono perfettamente orientati nella canalina del lineare.

REGOLATORI DIGITALI

I nuovi regolatori digitali permettono una facile taratura della base vibrante. Premendo due tasti sul controllo remoto o tramite PC/PLC è possibile cambiare frequenza e voltaggio, dati che possono essere memorizzati e richiamati in caso di cambio produzione. Sono collegabili in rete tramite bus di campo con relagolazione centralizzata di tutte le basi vibranti. Questi regolatori sono alimentati a 110÷200V 50÷60Hz o a 24V per le integrazione su impianti.

Bracci meccanici di carico e scarico con meccanismo a camma. Progettato e ideato sulla base del “saving time” per ridurre notevolmente il tempo di progettazione e costruzione di chi realizza impianti di montaggio.

Velocità, precisione, ripetibilità sono le caratteristiche dei nostri bracci meccanici.

AVETE SPESSO IRREGOLARITA' DI FUNZIONAMENTO COL VOSTRO BRACCIO PNEUMATICO?	RISOLVEO CON I NOSTRI BRACCI MECCANICI

Movimento irregolare del braccio causato da: • Dall'urto al momento dell'arresto del cilindro • Insufficienza della rigidità dell'unità • Fluttuazione della pressione d'aria • Vita breve del cilindro	Movimento corretto e rapido • Assume un movimento stabile grazie alla camma che ha una forma che non dà scossa né vibrazione ed assorbe l'inerzia tramite un meccanismo rigido • Non subisce interferenze dall'esterno e anche dopo 10 anni di funzionamento ha la stessa ripetibilità

Libertà di movimento limitata • Non può fermarsi durante la corsa • E' difficile aggiungere una nuova corsa intermedia • Non è possibile cambiare la corsa di prelievo e di avanzamento	Corsa di movimentazione • Può essere arrestato in qualsiasi momento • Grazie alla combinazione di movimento delle 2 camme è possibile creare qualsiasi movimento

Difficoltà nel progetto, controllo e regolazione • Necessita di molto tempo per i collegamenti dei sensori e tubi dell'aria • Necessita di molto tempo per la regolazione di posizione e di velocità di arresto	Meno tempo significa riduzione di costo e di lavoro • Regolazione facile • Installazione semplice • Manutenzione minima

Problemi ambientali • Importante consumo d'aria e di energia elettrica del compressore • L'olio si nebulizza nell'ambiente • Troppo rumoroso • Perdita d'aria all'impianto pneumatico	Rispettoso dell'ambiente • Alta efficienza grazie alla potenza del motore • A parità di modello il consumo dell'energia elettrica è solamente 1/10 • L'azionamento del motore non inquina l'ambiente e non fa rumore

AVETE UN PROBLEMA DI QUESTO TIPO?	LE RISPOSTE LE AVETE DALLE NOSTRE PINZE

La vostra pinza si rompe frequentemente!! • Le griffe non sono rigide? • il movimento della pinza è molto lento? • la pinza è bloccata?	Grazie al nostro meccanismo originale e brevettato, è garantita una lunga durata che nussun concorrente può realizzare. Il sistema originale con leva specifica e l'azionamento a rullo garantisce ottime prestazioni con una minima manutenzione

La forza di presa è insufficiente!! • frequenti errori di presa e posizionamento? • perde spesso la posizione? • forza di presa insufficiente?	La nostra pinza garantisce una presa decisa e delicata al tempo stesso, come le dita di una mano

Il corpo pinza è ingombrante e difficile da applicare!! • la pinza è troppo grande e pesante? • ripetibilità non garantita?	E' disponibile una vasta gamma di pinze, la loro struttura compatta garantisce un'efficienza elevata.

Functional principle :

德国IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模块 <wbr>抓手

The position compensation is made possible through specially developed elastomer elements. If a position offset occurs, the workpiece to be inserted will be moved automatically by the resulting reaction forces in such a way that jamming an wedging of the parts is prevented. Depending on the chamfer present, positioning misalignments of up to 3 mm and angular misalignments of up to 2 degrees can be compensated. The compensation takes place horizontally in the x-y plane and about the x-y-z axis for angular compensation. After extension, the element returns back into the starting postition through self-centering.

	Typ	[mm]	Empf. Handlingsgew. [kg]	LX [mm]
	50	50	0,6 - 1,1	50
	80	80	1,2 - 2,4	100
	100	100	2,5 - 3,5	150
	125	125	3,7 - 7,0	200
	160	160	7,1 - 18	300
	200	200	18 - 52	400
	250	250	52 - 90	450
	300	300	52 - 150	600
The length of the gripper and part (LX Value) is the determining parameter for assembly operations with close tolerance fittings and insertion operations in which minimum insertion forces are required. The LX vlaue (see table) is the maximum value which should not be exceedes for an type. For simple insertion or placing operations, the recommended payload is to be taken as the approximate value to determine the necessary model. It can be exceeded in case of slow travelling movements. We shall be pleased to support you with your selection. Attention: If the elastomers have come into contact with oil or chemicals, please contact us, because in that way you need special elastomers made of Perbunane. If elastomers are for use in machine tools, then Perbunane elastomers must be used, because they are resistant to cooling media.

**Technical Data Compliance Wrist**

Model	Weight [kg]	Max. Compliance [mm]	Max. Rotation [°]	Payload [kg]	Locking Force [N bei 6 bar]
-50 G	0,26	± 3	± 2	0,6 - 1,1	-
-80 G	0,26	± 3	± 2	1,2 - 2,4	-
-80 Ü	0,3	± 2	± 2	1,2 - 2,4	-
-80 P	0,4	± 2	± 1	1,2 - 2,4	220
-80 V	0,45	± 2	± 1	1,2 - 2,4	220
-100 G	0,42	± 3	± 2	2,5 - 3,5	-
-100 Ü	0,46	± 2	± 2	2,5 - 3,5	-
-100 P	0,7	± 2	± 1	2,4 - 3,5	360
-100 V	0,82	± 2	± 1	2,5 - 3,5	360
-125 P	1,2	± 2	± 1	3,7 - 7,0	600
-160 P	1,7	± 2	± 1	7,1 - 18	500
-160 V	1,9	± 2	± 1	7,1 - 18	500
-200 P	4,0	± 3	± 1	18 - 52	1800
-200 V	4,5	± 3	± 1	18 - 52	1800
-250 P	10,1	± 3	± 1	52 - 90	2100
-250 V	10,6	± 3	± 1	52 - 90	2100
-300 P	5,8	± 2,5	± 1	52 - 150	1800

Functional principle:

	The compensation movement is implemented through linear roller guidance based on the compound slider principle. Compensation takes place without reaction force. The fixture can be locked in a central position using a double-action pneumatic cylinder. The compensation can take place two-dimensionally in the x-y direction.

Information:
The maximum allowable moment is the decisive parameter for the selection of the lateral alignment devices. Additional part picking or placing forces which can work as moment loads on the guides must be taken into account. If shock loads are to be expected, in case of a collision for example, a robot load limiter should be foreseen for the protection of the guides (see pages on robot load limiter systems).

**Technical data Lateral Alignment Device KA**

Model	KA 65	KA 80	KA 100	KA 125	KA 160	KA 200	KA 250	KA 300
allowable Moment [Nm]	2	3	30	60	100	150	250	300
Payload [kg]	0,5	1,0	2,0	2-5	10	15-40	30-80	50-200
Extension [mm]	± 1,5	± 2	± 2	± 3	± 4	± 12	± 14	± 25
Pressure Force [N]	150	200	400	800	1000	1600	2500	4000

Functional principle:

	The compensation movement is implemented through linear roller guidance based on the compound slider principle. Compensation takes place without reaction force. The fixture can be locked in a central position using a double-action pneumatic cylinder. The compensation can take place two-dimensionally in the x-y direction.

**Technical data Lateral Alignment Device KA**

Model	KA 65	KA 80	KA 100	KA 125	KA 160	KA 200	KA 250	KA 300
allowable Moment [Nm]	2	3	30	60	100	150	250	300
Payload [kg]	0,5	1,0	2,0	2-5	10	15-40	30-80	50-200
Extension [mm]	± 1,5	± 2	± 2	± 3	± 4	± 12	± 14	± 25
Pressure Force [N]	150	200	400	800	1000	1600	2500	4000

Functional principle:

The position compensation takes place horizontally in the pushing or pulling direction through playless ball bearings. The insertion force is determined through pressure springs and the pressure of an integrated pneumatic cylinder. The base plate is driven out to monitor an approach or insertion motion; it is inserted to monitor a removal operation (see functional sketch). The movement of the base plate is detected through an inductive sensor. In case of quick process movements, pressure can also be applied to the cylinder to block the unit.

Information:
The Z-axis compliance wrist can be combined with a compliance wrist in the simplest. As integrated components of an ZN, they can be used universally for tolerance compensation of lateral and angular misalignment with simultaneous fault recognition for monitoring.

**Technical data Z-Axis Compliance Wrist ZN**

Model ZN	50	80	100	125	160	200	250	300
Spring Force [N]	10/20	20/40	40/180	200/300	200/400	400/1000	400/1500	400/2000
Payload [kg]	1	2	2-3	5-8	20	40	160	300
Insertion Path [mm]	8	8	10	12	12	12	12	12
Force Range Pneumatic [N]	-	10-150	15-380	25-500	50-600	60-1700	70-1950	80-2200

Function Release turning angle about z-axis Reset into the zero position Store rotary offset Adjustable rotary force
Compensation Angle of rotation about the z axis
Compensation movements Up to ± 30°
Arias of application: Loading/unloading of workpiece carriers and machines Palletising Assembly

Function: Release the tipping angle about the x-y axes Release individual axis about the x or y axes Reset into the zero position
Compensation: Single axis tipping angle in the x-direction or in the y-direction
Compensation movements: Up to ± 5°
Areas of application: Loading/unloading of workpiece carriers and machines Palletising Assembly

Functional principle

Robot and tool adapter plates are held in position pneumatically and form a rigid unit under normal working conditions. The release forces or moments are presrcibed through the preset air pressure. In case of an overload, the adapter plates release.
A sensor detects the extension and transmits a signal to the robot controller, which stops the robot unit. When the collision has been cleared and the tool returned to the vertical position again, the ULS/ULD unit returns to the starting position through two built-in centering pins.

The robot load limiter reacts to pressure forces in the z-direction, to moments about the x and y-axes and to torsional moments about the z-axis.

Technical Data Robot Load Limiter ULS


Model	ULS 60	ULS 80	ULS 100	ULS 125	ULS 160	ULS 200
Compensation in z-axis-direction [mm]	11,0	11,9	13,6	11,9	14,5	9,5
Compensation horizontal [grade]	8 °	10 °	12 °	10 °	7 °	4 °
Compensation torsion [grade]	360 °	360 °	360 °	360 °	360 °	360 °
" with Anti-rotation device [optional]	-	90 °	90 °	40 °	90 °	90 °
Axial Breakaway 1 - 6 bar [N]	113-680	181-1085	246-1477	453-2720	785-4710	1327-7960
Moment Breakaway 1 - 6 bar [Nm]	2 - 13	4 - 26	7 - 41	17 - 103	39 - 236	86 - 517
Repeatability [mm]	± 0,02	± 0,02	± 0,03	± 0,03	± 0,05	± 0,1
Weight [kg]	0,36	0,42	0,75	1,5	6,7	9,8
Force- / Moment Rang

Technical Data Robot Load Limiter with internal cable routing (ULD)


Model	ULD 60	ULD 80	ULD 100	ULD 125	ULD 160	ULD 200	ULD 250	ULD 300
Compensation in z-axis-direction [mm]	11,1	12,1	12,0	12,1	15,0	10,4	15,0	23,0
Compensation horizontal [grade]	9 °	11 °	9 °	11 °	5 °	4 °	5 °	5 °
Compensation torsion [grade]	40 °	40 °	40 °	40 °	40 °	40 °	40 °	40 °
Axial Breakaway 1-6 bar [N]	135-700	210-1100	300-1500	510-2755	830-4720	1380-6710	1509-9024	1834-11389
Moment Breakaway 1-6 bar [Nm]	3-15	5-28	8-45	18-106	43-241	91-382	108-544	119-714
Repeatability [mm]	± 0,02	± 0,02	± 0,03	± 0,03	± 0,05	± 0,1	± 0,1	± 0,1
Weight [kg]	0,39	0,46	0,83	1,65	3,58	5,78	12,4	17,5
Force- / Moment Rang

Two - Finger Parallel Gripper
with roller bearing

Large opening stroke
Low construction
Light weight

Gripper locking device for gripping inside and outside
Synchronised gripper jaws

Functional principle:
The parallel movement of the finger is accomplished by a jaws and pinion drive. As a result of the pressure of two opposing pistions the jaws move in a synchronised way towards each other.

OPTIONS:

Sensors
Option C "gripper closed", Option O "gripper open". For the position of the inductive sensors please refer to the technical data of the gripper concerned.

Gripping Force Failsafe valve
A safety device for the gripping force by means of a spring is available as an option. The chuck stroke of the gripper is reduced by 50 %. The safety device can be applied for both inside and outside gripping.
Inside gripping = FS - 1
Outside gripping = FS - A

Pressure Medium
P = compressed air
H = hydraulic oil

**Technical Data**

Model	RPG 80-P	RPG 120-P	RPG 120-H
Max. air pressure [bar]	8	8	100
Gripping force at 6 bar [N]	1000	1000	-
Gripping force at 60 bar [N]	-	-	2000
Gripping force at 100 bar [N]	-	-	3000
Weight [kg]	8,5	9,0	10,5
Stroke [mm]	80	120	120
Displacement [cm³]	2x128	2x192	2x23,56

Electric Grippers

The electronic grippers in the EGS series are designed to cope with very difficult applications where a high degree of flexibility is needed.
All systems are of a strong mechanical construction which allows of a maintenance-free operation. To ensure that our system can be used to optimal effect in a wide range of different situations, we have designed 3 basic models for you to choose from.

Following basic versions are available:

EGS-EP Compact with a combined electro-pneumatic drive

Great flexibility, because the opening width can be adjusted to any size
you wish via the electric servo drive.
Large gripping power and short travelling times via the pneumatic drive
Extra measuring capabilities, such as the monitoring of parts dimensions

EGS-E Compact with a regulated electric servo drive

Safe handling of sensitive parts
Measuring and monitoring functions
Can be used in clean rooms

EGS-E_LT Light with a simple electric drive

In areas where there is no compressed air
Especially suited for clean rooms

Functional principle:
	Parallel guiding of the jaws via 2 guide rails for high loads in the gripper jaws Pneumatic drive via 2 double-action pneumatic cylinders Electric drive via gear rods from a central pinion via low-play gearing from a highly dynamic sturdy DC motor Microcontrolled steering integrated in the gripper housing *(Typ Compact)* Simple standard in the external housing (Typ Light) Execution of any control command via standard digital inlets and outlets Only one power supply (24 V)

Functional principle:

Parallel guiding of the jaws via 2 guide rails for high loads in the gripper jaws
Pneumatic drive via 2 double-action pneumatic cylinders
Electric drive via gear rods from a central pinion via low-play gearing from a highly dynamic sturdy DC motor
Microcontrolled steering integrated in the gripper housing (Typ Compact)
Simple standard in the external housing (Typ Light)
Execution of any control command via standard digital inlets and outlets
Only one power supply (24 V)

**Technical data:**

Model EGS-	250-EP	250-E/-E_LT	375/1-EP	375/1-E/-E_LT	375/2-EP
Gripping force electrical [N]	-	155	-	180	-
Gripping force pneumatical at 6 bar [N]	155	-	330	-	330
Duration (for 19mm strokechange in s)	0,1	0,25	0,15	0,25	0,15
Stroke [mm]	19	19	25,4	25,4	50,8
Repeatability [mm]	<0,1	<0,1	<0,1	<0,1	<0,1
Electrical performance of servo [W]	10	25	25	30	25
Weight [kg]	1,23	1,28	1,56	1,59	1,56
Max. air pressure [bar]	8	-	8	-	8
Displacement [cm³]	3,75	-	9,78	-	19,56
Cylinder bore [mm]	16,0	-	22,22	-	22,22
Recommended payload [kg]	0,5	0,5	1,5	0,75	1,5

**Technical data:**
Model EGS-	375/2-E/-E_LT	-500/1-EP	500/1-E/-E_LT	500/2-EP	500/2-E/-E_LT
Gripping force electrical [N]	180	-	330	-	330
Gripping force pneumatical at 6 bar [N]	-	690	-	690	-
Duration (for 19mm strokechange in s)	0,25	0,15	0,25	0,15	0,25
Stroke [mm]	50,8	38,1	38,1	63,5	63,5
Repeatability [mm]	<0,1	<0,1	<0,1	<0,1	<0,1
Electrical performance of servo [W]	30	40	75	40	75
Weight [kg]	1,59	3,2	3,4	3,7	3,9
Max. air pressure [bar]	-	8	-	8	-
Displacement [cm³]	-	29,5	-	49,1	-
Cylinder bore [mm]	-	32,0	-	32,0	-
Recommended payload [kg]	0,75	4	2	4	2

	Title
Name	Features	Applications	View

PUL PUL.pdf	Miniature offset compensated basic low pressure sensors
PUL PUL.pdf	Pressure range 0...2.5 mbar to 0...75 mbar Output offset compensated Small size	Medical instrumentation Environmental control HVAC
ACL ACL.pdf	Miniature temperature compensated low pressure sensors
ACL ACL.pdf	Pressure range 0...5 mbar to 0...75 mbar Calibrated and temperature compensated Matched pressure port volumes Small size	Medical instrumentation Environmental control HVAC
ACLA ACLA.pdf	Miniature amplified low pressure sensors
ACLA ACLA.pdf	Ranges from 2.5 to 75 mbar differential or gage Precision temperature compensated Calibrated offset and span Extremely low position sensitivity Excellent long term stability	Medical instrumentation Environmental control Industrial chemical instrumentation HVAC
PXL PXL.pdf	Precision very low pressure sensors / mV-output
PXL PXL.pdf	Ranges from 2.5 to 75 hPa (mbar) differential or gage Precision temperature compensated Calibrated offset and span Extremely low position sensitivity Excellent long term stability	Medical instrumentation Environmental control Industrial chemical instrumentation HVAC
PXLA PXLA.pdf	Precision very low pressure sensors / Ratiometric 4V-output
PXLA PXLA.pdf	Ranges from 1 to 75 mbar differential or gage Precision temperature compensated Calibrated offset and span Extremely low position sensitivity Excellent long term stability	Medical instrumentation Environmental control Industrial chemical instrumentation HVAC

Single-Chip Technologie

	Title
Name	Features	Applications	View

PCM PCM-C.pdf	Precision compensated pressure sensores / mV-output
PCM PCM-C.pdf	Ranges from 10 mbar to 1 bar absolute, gage or differential Precision temperature compensated Calibrated offset and span Voltage excitation Excellent long term stability	Medical equipment Environmental control Industrial chemical instrumentation HVAC
PCM PCM-H.pdf	Precision compensated pressure sensores / mV-output
PCM PCM-H.pdf	Ranges from 10 mbar to 1 bar absolute, gage or differential Precision temperature compensated Calibrated offset and span Voltage excitation Excellent long term stability	Medical equipment Environmental control Industrial chemical instrumentation HVAC
PCM PCM-P.pdf	Precision compensated pressure sensores / mV-output
PCM PCM-P.pdf	Ranges from 20 mbar to 1 bar absolute, gage or differential Precision temperature compensated Calibrated offset and span Voltage excitation Excellent long term stability	Medical equipment Environmental control Industrial chemical instrumentation HVAC
PXM PXM.pdf	Precision compensated pressure sensors / mV-output
PXM PXM.pdf	Ranges from 20 mbar to 7 bar differential or gage, 1 bar absolute Precision temperature compensated Calibrated offset and span Voltage excitation Excellent long term stability	Medical equipment Environmental control Industrial chemical instrumentation HVAC
PXMA PXMA.pdf	Signal conditioned pressure sensors
PXMA PXMA.pdf	Ranges from 20 mbar to 10 bar Excellent long term stability Precision temperature compensated Ratiometric 4V output	Medical equipment Environmental control Industrial chemical instrumentation HVAC
PXMD PXMD.pdf	High precision digital output pressure sensors
PXMD PXMD.pdf	Ranges from 5"H2O (12.5 mbar) to 7 bar (100 psi) gage/differential or 15 psi (1 bar) to 100 psi absolut Barometric pressure ranges All combined errors over temperature less than 0.1 % typ Wide -20 to 85C or -40 to 125C temperature ranges Enhanced dual serial interface mode	Medical equipment Environmental control Industrial chemical instrumentation HVAC Meteorology
AS 1210/1220 Datasheet coming soon
AS 1210/1220 Datasheet coming soon

Stainless Steel

	Title
Name	Features	Applications	View

ASS 82 Datasheet coming soon
ASS 82 Datasheet coming soon
ASS 83 Datasheet coming soon
ASS 83 Datasheet coming soon
ASS 97 Datasheet coming soon
ASS 97 Datasheet coming soon
ASS 154 Datasheet coming soon
ASS 154 Datasheet coming soon
ASS 5000 Datasheet coming soon
ASS 5000 Datasheet coming soon

Submersibles

	Title
Name	Features	Applications	View

Hydro Datasheet coming soon
Hydro Datasheet coming soon

Food + Process

	Title
Name	Features	Applications	View

Serve 2000 Datasheet coming soon
Serve 2000 Datasheet coming soon
Serve 8000 Datasheet coming soon
Serve 8000 Datasheet coming soon

Specials

	Title
Name	Features	Applications	View

AB 1620 Datasheet coming soon
AB 1620 Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon
Datasheet coming soon

		Singleturn - Vert-X 13E High protection class IP69 Very compact dimensions Non-contacting measuring method Very long life High accuracy of measurement Use in cramped installation conditions Save for later		Data sheet Vert-X_13E_5V_eng.pdf CAD file Fixation_clip_Vert-X_13E_01.zip Vert-X_13E3_axial_01.zip Vert-X_13E3_radial_01.zip


		Singleturn - Vert-X 22E High protection class IP69 Flat design Non-contacting measuring method Very long life High accuracy of measurement Use in cramped installation conditions Save for later		Data sheet Vert-X_22E_5V_10...90_Ub_eng.pdf Vert-X_22E_5V_PWM_eng.pdf Vert-X_22E_5V_SPI_eng.pdf Vert-X_22E_24V_0.1-10V_eng.pdf Vert-X_22E_24V_0.5-4.5V_eng.pdf Vert-X_22E_24V_4-20mA_eng.pdf Vert-X_22E_24V_PWM_eng.pdf Vert-X_22E_24V_SPI_eng.pdf CAD file Fixation_clip_Vert-X_22E_01.zip Vert-X_22E1_axial_L10.85_01.zip Vert-X_22E1_axial_L16.85_01.zip Vert-X_22E1_radial_L16.85_01.zip Vert-X_22E1_radial_L21.50_01.zip Vert-X_22E2_axial_L10.85_01.zip Vert-X_22E2_axial_L16.85_01.zip Vert-X_22E2_radial_L16.85_01.zip Vert-X_22E2_radial_L21.5_01.zip


		Singleturn - Vert-X 27E High protection class IP69 Compact dimensions Non-contacting measuring method Very long life High accuracy of measurement Applications under adverse ambient conditions possible (humidity, dampness, oil, dust, vibrations etc.) Save for later		Data sheet Vert-X_27E_5V_10...90_Ub_eng.pdf Vert-X_27E_5V_PWM_eng.pdf Vert-X_27E_5V_SPI_eng.pdf Vert-X_27E_24V_0.1-10V_eng.pdf Vert-X_27E_24V_0.5-4.5V_eng.pdf Vert-X_27E_24V_4-20mA_eng.pdf Vert-X_27E_24V_PWM_eng.pdf Vert-X_27E_24V_SPI_eng.pdf CAD file Fixation_clip_Vert-X_27E_01.zip Vert-X_27E1_axial_01.zip Vert-X_27E1_radial_01.zip Vert-X_27E2_axial_01.zip Vert-X_27E2_radial_01.zip


		Singleturn - Vert-X 31E High protection class IP69 Compact dimensions Non-contacting measuring method Very long life High accuracy of measurement Applications under adverse ambient conditions possible (humidity, dampness, oil, dust, vibrations etc.) Save for later		Data sheet Vert-X_31E_5V_10...90_Ub_eng.pdf Vert-X_31E_5V_SPI_eng.pdf Vert-X_31E_5V_PWM_eng.pdf Vert-X_31E_24V_0.1-10V_eng.pdf Vert-X_31E_24V_0.5-4.5V_eng.pdf Vert-X_31E_24V_4-20mA_eng.pdf Vert-X_31E_24V_PWM_eng.pdf Vert-X_31E_24V_SPI_eng.pdf CAD file Vert-X_31E5a_01.zip Vert-X_31E5b_01.zip


		Singleturn - Vert-X 37E High protection class IP69 Very robust design Non-contacting measuring method Very long life High accuracy of measurement Applications under adverse ambient conditions possible (humidity, dampness, oil, dust, vibrations etc.) Save for later		Data sheet Vert-X_37E_5V_10...90_Ub_eng.pdf Vert-X_37E_5V_PWM_eng.pdf Vert-X_37E_5V_SPI_eng.pdf Vert-X_37E_24V_0.1-10V_eng.pdf Vert-X_37E_24V_0.5-4.5V_eng.pdf Vert-X_37E_24V_4-20mA_eng.pdf Vert-X_37E_24V_PWM_eng.pdf Vert-X_37E_24V_SPI_eng.pdf CAD file Fixation_clip_Vert-X_37E_01.zip Vert-X_37E1_axial_01.zip Vert-X_37E1_radial_01.zip Vert-X_37E2_axial_01.zip Vert-X_37E2_radial_01.zip Vert-X_37E4_axial_01.zip Vert-X_37E4_radial_01.zip

瑞士Contelec AG编码器

产品简介

详细介绍

Single-Chip Technologie

Stainless Steel

Submersibles

Food + Process

Specials

会员登录

公司名片

收藏该商铺

提示

收藏该商铺

制药网