德国 WAM GMBH-尚阶（上海）自动化设备有限公司

参考价	面议

产品简介

产地	进口	产品新旧	全新

丹麦Magnemag A/S喷印及标识设备光电开关传感器电磁阀

德国GH-INDUCTION DEUTSCHLAND收缩拟合表面涂层中频发电机高频信号发生器镀锌设备电感器制造

德国 WAM GMBH 阀门执行器固体放电设备水平及压力监测

详细介绍

丹麦Magnemag A/S喷印及标识设备光电开关传感器电磁阀

德国GH-INDUCTION DEUTSCHLAND收缩拟合表面涂层中频发电机高频信号发生器镀锌设备电感器制造

德国 WAM GMBH 阀门执行器固体放电设备水平及压力监测

:王工
同号
      449147851
价注意事项：
       1.请发书面询价函（邮件，，传真等），不接受口头报价。
       2.如果型号不能*对上，请提供英文品牌名+具体型号+数量。
       3.询价的商友请主动告知公司名称和，谢谢。

产品系列：

螺旋输送机和喂料机
除尘器
阀门执行器
固体放电设备
袋清空设备
集装袋（大袋）输水设备
供料计量设备
水平及压力监测与安全部件
筒仓安全部件
气力输送系统组件

（旋转阀）旋转给料机
振动器和流量
混合机，搅拌机，空调机，造粒机
斗式提升机
阀门
链式输送机
ATEX认证标准的产品
固液分离设备
Screw Conveyors & Feeders
Dust Collectors
Valve Actuators
Solids Discharging Equipment
Bag Emptying Equipment
FIBC (Big Bag) Filling & Emptying Equipment
Feeding & Metering Equipment
Level & Pressure Monitoring & Safety Components
Silo Safety Components
Pneumatic Conveying System Components
Rotary Feeders (Rotary Valves)
Vibrators & Flow Aids at OLI GmbH
Mixers, Blenders, Conditioners, Granulators
Bucket Elevators
Valves
Chain Conveyors
ATEX compliant products
Solids-Liquid Separation Equipment

产品系列：

- 淬火和回火
- 缝焊钢管
- 粘接
- 硬和软钎
- 福尔热供暖
- 电线和带暖气
- 收缩拟合
- 表面涂层
- 中频发电机
- 高频信号发生器
- 镀锌设备
- 电感器制造

Shrink-Fitting

Inductive heating is an optimal solution for shrink-fitting of parts in half or fully automatic production line, such as:

- Shrink-fitting of steel bushels, gears, axle drive gears, drive gears onto crank shafts
- Starter gear rings onto flywheels
- Shafts into rotors
- VA rings onti pipes of various diameters
- Clutch shafts onto clutch heads
- Rear axle carrier tubes

Surface Coating

The GH-Group offers heating equipment for coating machines for melting and gelatinization
of powdered lacquers and powdered coatings on electrically conducting surfaces.
Aplications realised so far:

- Primary coating of security relevant parts
- Steel bearing flanges
- Aluminium and steel rings
- Steel reservoirs
- Aluminium and steel car attachments
- Suspension struts and supports (rubber - metal joint)

MF-Generators

Middle-frequency Generators for Inductive Heating Machines

Technical Characteristics :

- High efficiency power electronics
- Water cooled power electronics
- Modular rack design for power electronics
- Short circuit proof invertor
- Power output switcheable for up to 3 heating stations
- Internal and external heating station possible
- Electronic control with diagnostics and status signalling
- Three phase mains without network compensation (generators with serial oscillator)
- Compliant with electrotechnical directives incl. EMC instructions
- Bus coupling via Interbus, Profibus and Ethernet

  Appr. 3,000 GH generators worldwide for inductive heating machines.
  Power range: 2 to 2.800 kW
  Appr. 400 generators at German costumers' sites

Generator w/ Parellel Oscillator Thyristor Invertor Output up to 3 MW Working frequency 1 - 10 kHz
	Invertor - Rack Comnponents
MF-Generator, 50 kW / 5-20 kHz w/ process control system for temperature and energy control

Generator w/ Serial Oscillator
IGBT Invertor
Output up to 400 kW
Working frequency up to 30 kHz

MF-Generator 75 KW / 5-20 kHz

Galvanizing Equipment

The GH equipment for inductive galvanizing with mains frequency are clearly superior to the traditional methods, incl. electric resistance heating. in the technological process of maintaining zinc bath temperature, as well as galvanization quality, costs of investment as well as energy consumption.

Inductor Manufacturing

For all applications, the GH- Group designs and supplies individually manufactured and
optimally customized for the given purpose copper inductors and quenching sprayers.
Optimally designed inductors, selected materials and perfect manufacturing ensure maximum
service life.

Forge Heating

GH inductive heating units allow to heat parts before forging to the required temperature in a clean,
secure working atmosphere with low thermal emissions and optimal quality assurance.

In comparison to traditional heating kilns, inductive heating for forging is much easier to realize.

Process automatation, reduced scaling and immediate availability are only a few of the advantages
provided by GH inductive forge heating units.

GH- Group manufactures forge heating units with a throughput of up to 5000 kg per hour.
Forge heating units can be manufactured for pass, push and lifting bar, with manual feed, feeder
hopper und sorting.

Customized software provides optimal forge process support for monitoring, heat maintenance
control and emptying of heating unit.


Forge heating unit with moveable oscillator coils for different part diameters	Forge heating unit

Forge heating unit - part transfer	Rod heater with feeder

Rod heater - part exit	Rod end heating unit

Pipe end twin heating unit with prestack and forming press	Pipe end heating

Partial heating with pipe end forming press

HF-Generators

High Frequency Generators for Inductive Heating

Technical Characteristics :

- High efficiency power electronics
- Water cooled power electronics
- Modular rack design for power electronics
- Short circuit proof invertor
- Internal and external heating station possible
- Electronic control with diagnostics and status signalling
- Three phase mains without network compensation (generators with serial oscillator)
- Compliant with electrotechnical directives incl. EMC instructions
- Bus coupling via Interbus, Profibus and Ethernet

  Appr. 3,000 GH generators worldwide for inductive heating machines.
  Power range: 2 to 2.800 kW
  Appr. 400 generators at German costumers sites

Generator w/ Parallel Oscillator

Generator w/ Serial Oscillator

MOSFET Invertor	IGBT Invertor	MOSFET Invertor
Power up to 700 kW Working Frequency up to 600 Khz	Power up to 1 MW Working requency up to 100 kHz	Power up to 25 kW Working Frequency up to 500 kHz


HF-Generator 6 kW / 300-500 kHz	HF-Generator 300 kW / 300-500 kHz

德国 WAM GMBH

产品简介

详细介绍

会员登录

公司名片

收藏该商铺

提示

收藏该商铺

制药网