IEC61000 EMC测试系统 - ISO17025认证

*符合IEC61000 EMC测试系统（IEC61000-3-2，IEC61000-3-3，IEC61000-3-11，IEC61000-3-12，IEC61000-4-11，IEC61000-4-13，IEC61000-4-17，IEC61000 -4-29）

N4L的IEC61000系列EMC测试系统为EMC抗扰度测试提供了完整的交钥匙解决方案。所述N4A AC + DC电源，PPA55x1和阻抗网络在一个简单的，方便的，符合性测试包的组合，以及直观的EMC测试软件（IECSoft）结果。

N4L是世界上 的制造商*与现场UKAS ISO17025校准实验室认可提供给IEC61000-3-2，IEC61000-3-3，IEC61000-4-7和IEC61000-4-15。校准和跟踪能力是EMC N4L UKAS实验室的一个重要方面。 N4L的IEC61000-4-15校准程序特别值得注意，因为它符合IEC61000-4-15附录C中详细描述的整个测试协议。 IEC61000-4-15中的特定参数在典型的闪烁校准过程中保持未经测试是司空见惯的。附件C测试协议内的所有测试都包含在N4L的认证和校准程序范围内。

IECSoft是EMC测试包的一个组成部分，集成了各种硬件组件并以清晰的方式显示数据。作为IECSoft灵活性的一个例子，用户能够将全面的测试数据发送给设计部门内的外部客户或同事。这是如何以协调和闪烁的方式完成的，从而可以显示测试结果（以报告形式）。 IEC61000-3-2 IEC 6000-3-2谐波失效5，IECSoft可以在EUT中找到在符合性测试失败的情况下，设计工程师。过去的EMC测试系统不适用搜索限制。

产品图片

6kVA单相

IEC61000-3-2谐波图，限值

IEC61000-3-2谐波图，限制百分比

IEC61000-3-2谐波合规报告摘要页面

IEC61000-3-2谐波报告，表格

IEC61000-3-3 / 12闪烁实时显示

测试系统配置示例

以下是本页顶部表格中列出的 IEC / EN标准的谐波和闪烁解决方案示例。

测量要求

合规

分析仪

阻抗网络

校准

（可选）

交流电源

IEC61000电磁兼容测试

16Arms单相

IEC61000-3-2

IEC61000-3-3

IEC61000-4-11

IEC61000-4-13

IEC61000-4-17

IEC61000-4-29

PPA5500功率分析仪前视图无bg切碎200px

PPA5511谐波和

闪烁分析器

+

IMP161前面板200px
IMP161阻抗网络

+

UKAS_Logo
+

n4a06_small

N4A06交流电源

IEC61000电磁兼容测试

16Arms三相

IEC61000-3-2

IEC61000-3-3

IEC61000-4-11

IEC61000-4-13

IEC61000-4-17

IEC61000-4-29

PPA5500功率分析仪前视图无bg切碎200px
PPA5531谐波和

闪烁分析器

+

imp163 200px蓝色
IMP163阻抗网络

+

UKAS_Logo
+

n4a06_small

N4A18交流电源

IEC61000电磁兼容测试

32Arms三相

IEC61000-3-2 / IEC61000-3-3

IEC61000-3-11 / IEC61000-3-12

IEC61000-4-11

IEC61000-4-13

IEC61000-4-17

IEC61000-4-29

 PPA5500功率分析仪前视图无bg切碎200px
PPA5531谐波和

闪烁分析器

+

imp163 200px蓝色
IMP323阻抗网络

图为IMP163

+

UKAS_Logo
+

n4a06_small

N4A30交流电源

IEC61000电磁兼容测试

75Arms三相

IEC61000-3-2 / IEC61000-3-3

IEC61000-3-11 / IEC61000-3-12

IEC61000-4-11

IEC61000-4-13

IEC61000-4-17

IEC61000-4-29

 PPA5500功率分析仪前视图无bg切碎200px
PPA5531谐波和

闪烁分析器

+

 imp163 200px蓝色
IMP753阻抗网络

图为IMP163

+

UKAS_Logo
+

n4a06_small

N4A67交流电源

特点和优点

0.01％基本精度频率范围DC和10mHz至1MHz
*符合IEC61000-3-2*符合IEC61000-3-3
*符合IEC61000-3-11*符合IEC61000-3-12
*符合IEC61000-4-11*符合IEC61000-4-13
*符合IEC61000-4-17*符合IEC61000-4-17
预兼容IEC61000-4-29预兼容IEC61000-4-17
高精度内部分流器对任何外部分流器都具有出色的精度5毫安相位精度对于低功率因数应用是必需的
50 Arms（1000 Apk）和1000 Vrms（3000 Vpk）直接输入Stan

IEC61000 EMC Test Systems – ISO17025 Accredited

Fully Compliant IEC61000 EMC Test Systems (IEC61000-3-2, IEC61000-3-3, IEC61000-3-11, IEC61000-3-12, IEC61000-4-11, IEC61000-4-13, IEC61000-4-17, IEC61000-4-29)

N4L’s range of IEC61000 EMC test systems offer a complete turn key solution for EMC immunity testing. The combination of the N4A AC+DC Power Source, PPA55x1 and Impedance Networks, as well as intuitive EMC test software (IECSoft) result in a simple, convenient, compliant test package.

N4L are the only IEC61000 EMC test system manufacturer in the world* with an on site UKAS ISO17025 calibration laboratory offering accreditation to IEC61000-3-2, IEC61000-3-3, IEC61000-4-7 and IEC61000-4-15. Calibration and trace-ability are a vital aspect of any EMC test solution and the coverage provided through N4L’s UKAS Laboratory is comprehensive. N4L’s IEC61000-4-15 calibration procedure is particularly noteworthy as it covers the entire test protocol detailed in Annex C of IEC61000-4-15. It is commonplace for specific parameters within IEC61000-4-15 (d parameters are frequently omitted from calibration procedures) to remain untested during typical flicker calibration due to the difficulty in providing trace-ability for such measurements. All tests within the test protocol of Annex C are included within the scope of accreditation and calibration procedures at N4L.

IECSoft is an integral component of the EMC test package, integrating the various hardware components and displaying the data in a clear manner. As an example of IECSoft’s flexibility, the user is able to send comprehensive test data to external customers or colleagues within the design department. This is useful as design engineers are able to replay Harmonics and Flicker tests in real time, allowing visualization of not only the results of the tests (in report form), but also determination of the devices performance throughout the test. An example of this may be that the final report of an IEC61000-3-2 test results in the EUT(Equipment under test) failing on Harmonic 5, IECSoft can replay the behavior of harmonic 5 throughout the test which can significantly reduce debugging time for the design engineer in the event of such a failed compliance test. In the past EMC test systems would only offer details of the harmonic failure levels in summary form, with an N4L EMC test system no such restrictions apply.

Product Images

6kVA Single Phase IEC61000 EMC Test system

IEC61000-3-2 Harmonic Graph, absolute limits

IEC61000-3-2 Harmonic Graph, percentage of limit

IEC61000-3-2 Harmonic compliance report summary page

IEC61000-3-2 Harmonic report, table

IEC61000-3-3/12 Flicker real time display

Example Test System Configurations

Below are example test system configurations which provide compliant Harmonics and Flicker test solutions to the latest IEC/EN standards listed in the table at the top of this page.

Measurement Requirement	Compliance	Analyzer		Impedance Network		Calibration (optional)		AC Source
IEC61000 EMC Testing 16Arms Single Phase	IEC61000-3-2 IEC61000-3-3 IEC61000-4-11 IEC61000-4-13 IEC61000-4-17 IEC61000-4-29	PPA5511 Harmonics and Flicker Analyzer	+	IMP161 Impedance Network	+		+	N4A06 AC Power Source
IEC61000 EMC Testing 16Arms Three Phase	IEC61000-3-2 IEC61000-3-3 IEC61000-4-11 IEC61000-4-13 IEC61000-4-17 IEC61000-4-29	PPA5531 Harmonics and Flicker Analyzer	+	IMP163 Impedance Network	+		+	N4A18 AC Power Source
IEC61000 EMC Testing 32Arms Three Phase	IEC61000-3-2/IEC61000-3-3 IEC61000-3-11/IEC61000-3-12 IEC61000-4-11 IEC61000-4-13 IEC61000-4-17 IEC61000-4-29	PPA5531 Harmonics and Flicker Analyzer	+	IMP323 Impedance Network (IMP163 Pictured)	+		+	N4A30 AC Power Source
IEC61000 EMC Testing 75Arms Three Phase	IEC61000-3-2/IEC61000-3-3 IEC61000-3-11/IEC61000-3-12 IEC61000-4-11 IEC61000-4-13 IEC61000-4-17 IEC61000-4-29	PPA5531 Harmonics and Flicker Analyzer	+	IMP753 Impedance Network (IMP163 Pictured)	+		+	N4A67 AC Power Source

Features & Benefits

 *according to N4L research July 2016

Products in this series