详细介绍
进口低温减压阀德国洛克品牌*
进口低温减压阀性能范围:
公称通径 DN10~DN100mm
公称压力 2.5Mpa、4.0Mpa
适用介质 液氧、液氮、液氩、液化天然气、液态二氧化碳、液态丙烷等
适用温度 -196℃~+80℃
调压范围 A型0.1MPa~0.3MPa;B型0.2MPa~1.0MPa;C型0.8MPa~1.6MPa
阀体、阀盖、阀瓣、膜片 SS304、SS316
弹簧 60Si2MnA
进口低温减压阀德国洛克品牌*
进口低温减压阀产品概述:
德国《DE LOCKE》洛克进口低温减压阀,也叫进口低温调压阀,进口低温压力调节阀,进口低温减压稳压阀,是在低温贮槽上用于将低温液体(液氧,液氮,液氩,液化天然气,LO2、LN2、LAR、LNG等)的压力保持在某一规定范围内,也就是将阀前进口的高压力减到并稳定在阀后出口所需要的压力值的阀门。
LOCKE进口低温减压阀经特殊的低温处理,将粗加工的零件置于冷却介质中数小时(2-6小时),以释放应力,确保材料的低温性能,保证精加工尺寸,以防阀门在低温工况时,因温度变化造成变形而导致的泄漏。阀门的装配与普通阀门也不同,零件需经过严格的清洗,除去任何油污,以保证使用性能。
进口低温减压阀产品特点:
1、低温减压阀结构紧凑、体积小、重量轻、调节灵敏、稳定性好,
2、低温减压阀带可调装置,压力调节方便,
3、低温减压阀阀门经低温深冷处理,可耐-196℃低温,
4、低温减压阀垫片具有在常温下、低温状态及温度变化下能可靠密封性和复原性,密封性能好。
Features of imported low temperature pressure reducing valve:
1. The low temperature pressure reducing valve has the advantages of compact structure, small volume, light weight, sensitive adjustment and good stability,
2. Low temperature pressure reducing valve with adjustable device, easy to adjust pressure,
3. After cryogenic treatment, the valve can withstand - 196 ℃,
4. The gasket of low temperature pressure reducing valve can be reliably sealed and recovered under normal temperature, low temperature state and temperature change, with good sealing performance.