振动输送式流化床空气干燥器 Jog Fluid Bed Air Drier
产品型号：JCD 1250
适用范围
振动输送机具有广泛的应用和结构，可用于输送、清洁、分级和干燥谷物（例如种子包衣后潮湿）和类似产品。
工作原理
-振动式输送干燥机通过偏心轴的作用工作，偏心轴通过连杆使输送机前后移动，从而使物料通过螺旋悬挂装置移动。
-振动输送干燥机缓慢运输物料，并在出口/出口清空物料。为了便于干燥过程，机器采用穿孔筛网系统。
-JCD设计有加热段和筛分段。通过使用慢跑输送机烘干机下方的加热器和鼓风机，为每个加热段分别提供热空气。
-每个筛分部分由带连接喷嘴DM120 mm的单筛分组成，用于抽吸。
-主驱动是一个4kw的电机（驱动的操作必须通过变频器（不包括在振动输送机烘干机中）。
-入口处的可调进料门决定了振动输送机干燥机甲板上的层厚度。
| 型号槽宽mm | 长度m | 振动频率min | 振动幅度mm | 破碎率% | 产量t/h | 功率kW |
| 5XLG 300 | 2-20 | 320次 | 10 | 无 | 5 | 2.2 |
| 5XLG 400 | 2-20 | 330次 | 10 | 无 | 10 | 3.0 |
| 5XLG 480 | 2-20 | 350次 | 10 | 无 | 20 | 4.0 |
Product Code: JCD 1250
Application
The jog conveyor has a wide range of application and construction and can be used for conveying, cleaning, grading and drying grain (for example, coated or dressed materials) and similar products.
Working principle
-The jog conveyor dryer works by the action of the eccentric shaft which, via connecting rods, causes the conveyor to move backwards and forwards, which the results in the movement of the material via the coiled suspension units.
-The jog conveyor dryer transports material slowly and empties the material at the outlet /outlets. In order to facilitate drying processes, the machine is constructed with a perforated screen system.
-JCD designed with heating sections, and screening sections. Each of the heating sections is supplied separately with warm air, by using heaters and blowers below the jog conveyor dryer.
-Each screening section consists of single screens with connection spout DM120 mm for aspiration.
-The main drive is a 4 kW - squirrel cage motor (The operation of the drive must be by frequency inverter (not included with the jog conveyor dryer)
-An adjustable feeding gate at the inlet to the deck determines the thickness of the layer on the deck of the jog conveyor dryer.
采购中心
