304不锈钢卫生级U型焊接隔膜阀规格厂家

卫生级U型焊接隔膜阀

1、采用橡胶或塑料等软质密封制作的隔膜阀膜片，密封性较好。由于隔膜阀膜片为易损件，应视介质特性而定期更换。

2、受隔膜阀膜片材料限制，隔膜阀适用于低压和温度相对不高的场合。

3、隔膜阀按结构形式可分为：屋式隔膜阀、直流式隔膜阀、截止式隔膜阀、直通式隔膜阀、闸板式隔膜阀和直角式隔膜阀六种;连接形式通常为法兰连接;按驱动方式可分为手动、电动和气动三种，其中气动驱动又分为常开式、常闭式和往复式三种。

4.隔膜阀是利用阀杆将弹性体薄膜紧压在阀座上用来隔断气路。转动手轮可带动阀杆上、下移动，使隔膜阀膜片离开阀座打开阀门或使隔膜阀膜片紧压在阀座上关闭阀门。

5.此种阀门如采用丁晴橡胶隔膜阀膜片，适用于前级和预抽管道上及温度为-25～80℃的非腐蚀性气体。如采用氟橡胶隔膜阀膜片，可用于高真空系统，使用温度范围为-30～150℃

卫生级盖米隔膜阀，气动带调节盖米隔膜阀，带信号反馈气动调节隔膜阀

卫生级U型焊接隔膜阀，订做手动U型焊接隔膜阀规格优点：1.可安装于任何位置，介质流向对阀门开闭不影响阀体使用球体堰槽密封，结构可延长隔膜片的使用寿命提供所有现行的卡接和焊接的工业。

2.标准隔膜片符合FDA及UPS等机构对药品和食品行业规定的安全标准。

Sanitary U-shaped Welded Diaphragm Valve

1. The diaphragm valve diaphragm made of soft seal such as rubber or plastic has better sealing performance. Since the diaphragm of the diaphragm valve is a wearing part, it should be replaced regularly according to the characteristics of the medium.

2. Limited by the diaphragm material of the diaphragm valve, the diaphragm valve is suitable for occasions with low pressure and relatively low temperature.

3. Diaphragm valve can be divided into six types according to the structure: house type diaphragm valve, DC type diaphragm valve, globe type diaphragm valve, straight-through type diaphragm valve, gate type diaphragm valve and right angle type diaphragm valve; the connection form is usually flange connection ;According to the driving mode, it can be divided into three types: manual, electric and pneumatic, among which the pneumatic drive is divided into three types: normally open, normally closed and reciprocating.

4. The diaphragm valve uses the valve stem to press the elastomer film tightly on the valve seat to cut off the gas path. Turning the handwheel can drive the valve stem to move up and down, so that the diaphragm valve diaphragm leaves the valve seat to open the valve or the diaphragm valve diaphragm tightly presses on the valve seat to close the valve.

5. If this kind of valve adopts the NBR diaphragm valve diaphragm, it is suitable for the non-corrosive gas on the front stage and the pre-pumping pipeline and the temperature is -25 ~ 80 ℃. If the fluororubber diaphragm valve diaphragm is used, it can be used in high vacuum system, and the operating temperature range is -30 ~ 150 ℃

Sanitary Gemi Diaphragm Valve, Pneumatic GEM Diaphragm Valve with Adjustment, Pneumatic Adjustment Diaphragm Valve with Signal Feedback

Sanitary U-shaped welded diaphragm valve, customized manual U-shaped welded diaphragm valve Specifications Advantages: 1. Can be installed in any position, the flow direction of the medium does not affect the valve opening and closing, the valve body is sealed with a ball weir groove, and the structure can extend the diaphragm Longevity is provided for all current snap-fit and welding industries.

2. The standard diaphragm conforms to the safety standards stipulated by FDA and UPS for the pharmaceutical and food industries.

图片信息：304不锈钢卫生级U型焊接隔膜阀规格厂家

公司简介：

安徽利勒洁净设备科技有限公司是国内专业生产制造洁净卫生级阀门管件，主要应用于食品机械行业、制药机械行业、乳制品行业、酿酒饮料行业以及精细化工等行业高精度卫生级流体设备的专业生产厂家，产品规格齐全；产品主要有：

无菌隔膜阀，卡箍直通隔膜阀，三通隔膜阀，法兰隔膜阀，气动隔膜阀，U型隔膜阀，罐底隔膜阀 ；

无菌球阀，卡箍直通球阀，螺纹球阀，焊接球阀，气动球阀，法兰球阀，电动球阀；

卫生级蝶阀，焊接蝶阀，卡箍直通蝶阀，螺纹蝶阀，法兰蝶阀，气动蝶阀，电动蝶阀；

不锈钢卫生泵，不锈钢卫生级离心泵，不锈钢卫生自吸泵，不锈钢酒精防爆泵，卫生奶泵，卫生饮料泵；

止回阀，过滤器、呼吸器、换向阀、防混阀、安全阀；304不锈钢卫生级U型焊接隔膜阀规格厂家

卫生级不锈钢管件，焊接弯头，快装弯头，不锈钢三通，快装三通，四通，真空弯头，大小头；

罐顶组件系列，不锈钢储罐，发酵罐，不锈钢卫生级人孔，清洗球/器，视镜灯，排气阀等其它非标产品生产加工；

我们竭诚为您服务.