应用 Applications
★医药、食品、化工等行业进行以下物料干燥
★适用于浆状、膏糊状、粉状物料。
★要求低温干燥的热敏性物料。
★易氧化、易爆、强刺激、剧毒物料。
★要求回收有机溶剂的物料。
★The following raw materials from pharmaceutical industry, foodstuff industry, chemical industry and so on can be dried.
★Suitable for pulpiness, paste-like mixture or powder raw materials.
★Thermal sensitive raw materials having the requirement to dry at lower temperature
★Raw materials that are easy to oxidize or explode and have strong irritative or toxic. Raw materials that need to recover solvent.
特点 Features
★本机采用大面积夹层加热方式,传热面大,热效率高。
★本机设置搅拌,使物料在桶内形成连续循环状态,进一步提高了物料受热的均匀度。
★本机设置搅拌,从而可顺利进行浆状,膏状,糊状物料干燥。
★Being adopted the big area heating way , its heat conducting area is large and its heat efficiency is high.
★Being installed stirring in the machine, it makes raw material in cylinder from the state of continuous circle inside the uniformity to be heated of raw material is raised geatly.
★Being installed stirring in the machine , pulpiness, paste-like mixture or powder raw materials can be dried easy.
原理 Principle
★本机是一种新型卧式间歇式真空干燥设备,湿物料经传导蒸发,带有刮板搅拌器不断清除热面上的物料,并在容器内推移形成循环流,水份蒸发后由真空泵抽出.
★It is an innovation horizontal batch-type vacuum dryer. The moister of wet material will be evaporated by heat transmission . The stirrer with squeegee will remove material on hot surface and move in the container to form cycle flow. The evaporated moisture will be pumped by vacuum pump.
型号 Model | ZPG-500 | ZPG-750 | ZPG-1000 | ZPG-1500 | ZPG-2000 | ZPG-3000 | ZPG-5000 | |
工作容积 Working volume | L | 300 | 450 | 600 | 900 | 1200 | 1800 | 5000 |
内筒尺寸 Over in the cylinder | mm | Ø600×1500 | Ø800×1500 | Ø800×2000 | Ø1000×2000 | Ø1000×2600 | Ø1200×2600 | Ø1400×3400 |
搅拌转速 Stirring revolution | rpm | 6~30无级调速 6~30 stepless variable | ||||||
功率 Power | Kw | 4 | 5.5 | 5.5 | 7.5 | 11 | 15 | 22 |
夹层设计压力 Design prseeure of jacket | MPa | ≤0.3 | ||||||
筒内压力 Pressure in the cylinder | MPa | -0.096~0.15 |
注:水份蒸发量与物料的特性及热风进、出口温度有关。随着产品不断更新,有关参数变更,恕不预先通知。
Notes:the evaporated amount of water its related to the characteristics of raw materials and the temperature of air in and air out. With renew products unceasingly, the related parameters will be exchanged, it does not announce in advance, pardon!