宽频带钳式电流探头3273-50~3276系列用单独驱动用电源单元
● 用于观测电流波形
● 3273-50/ 3274/ 3275/ 3276专用
● 示波器不能提供电源时也可使用钳式电流探头
● 存储记录仪系列也可使用钳式电流探头
基本参数(接通电源30分钟后,温度23±3℃)
适用型号 | 3273, 3273-50, 3274, 3275, 3276钳式电流传感器 |
---|---|
电源连接数目 | 最多4个 |
输出电压 | ±12V ±0.5V |
使用环境 | 0~40℃,80%rh(不凝结) |
电源要求 | 请从100V, 120V,220V,240V中使用的电压, 170 VA |
体积及重量 | 约80宽×119高×200厚mm,1.1kg |
附件 | 电源线×1 |
Wideband clip-on current probes 3273-50 ~ 3276 series with individual drive power units
For observing current waveforms
3273-50/3274/3275/3276 dedicated
When the oscilloscope is unable to provide power supply, the clamp type current probe can also be used
Storage recorder series can also use clamp current probe