基本参数
测试项目 | 绝缘电阻(直流电压施加方式) |
---|---|
测试电压/测量量程 | 25 V ≦ V < 100 V (2.000/20.00/200.0 MΩ), 100 V ≦ V < 500 V (2.000/20.00/200.0/2000 MΩ), 500 V ≦ V ≦ 1000 V (2.000/20.00/200.0/4000/9990 MΩ) |
基本精度 | ±2 % rdg. ±5 dgt. 25 V ≦ V < 100 V [0~20 MΩ], 100 V ≦ V < 500 V [0~20 MΩ], 500 V ≦ V ≦ 1000 V [0~200 MΩ] |
测试速度 | FAST:30ms/次,SLOW:500ms/次(切换) |
显示屏 | LCD (寿命100,000小时),背光灯4阶段 |
存储功能 | 保存内容:额定测量电压、比较器上下限值、测试模式、判定时蜂鸣音、测试时间、响应时间、电阻量程、测量速度 |
测试模式 | 连续模式、PASS STOP模式、FAIL STOP模式、强制结束时判定模式(切换) |
比较设置 | UPPER_FAIL:测量值≧上限值 PASS: 上限值>测量值>下限值 LOWER_FAIL:测量值≦下限值 |
判定处理 | 蜂鸣音、PASS/U.FAIL/L.FAIL 的LED 灯亮,UL_FAIL时U.FAIL/L.FAIL同时灯亮,EXT. I/O 输出、通过RS-232C获取判定结果 |
试验时间计时器 | 0.045 s ~ 999.999 s(0.001 s 分辨率),从施加电压到判定合格与否的时间 |
响应时间计时器 | 试验开始后,禁止按照0.005 s ~ 999.999 s(0.001 s 分辨率)设置比较器判定动作的时间 |
模拟输出 | DC +4 V f.s. |
接口 | RS-232C(标配),外部I/O(外部控制器用输入,判定结果输出),BCD输出(ST5520-01) |
电源 | AC100 V ~ 240 V,50/60Hz,25VA |
体积及重量 | 215W×80H×166Dmm,1.1kg |
附件 | 使用说明书×1、电源线×1、EXT.I/O连接器×1、连接器盖×1 |
Basic parameters
Test Items: Insulation Resistance (DC Voltage Application Mode)
Test Voltage/Measurement Range
(Manual/automatic)
25 V < V < 100 V (2.000/20.00/200.0 M_),
100 V < V < 500 V (2.000/20.00/200.0/2000 M_),
500 V < V < 1000 V (2.000/20.00/200.0/4000/9990 M_)
The basic accuracy is (+2%) rdg. (+5 dgt).
25 V < V < 100 V [0-20 M_],
100 V < V < 500 V [0-20 M_],
500 V < V < 1000 V [0-200 M_]
Test speed FAST:30ms/time, SLOW:500ms/time (switching)
LCD (life 100,000 hours), backlight stage 4
Storage function
Preserved contents: rated measurement voltage, upper and lower limits of comparator, test mode, buzzing sound when judging, test time, response time, resistance range, measurement speed
Storage: up to 10 groups (saveable/readable)
Test mode: Continuous mode, PASS STOP mode, FAIL STOP mode, Forced End Decision mode (Switching)
Comparison Settings UPPER_FAIL: Measured Value (> Upper Limit Value)
PASS: upper limit value > measurement value > lower limit value
LOWER_FAIL: Measured value < Lower Limit
Decision processing: buzzing, PASS/U.FAIL/L.FAIL L ED lights on, UL_FAIL U.FAIL/L.FAIL lights on at the same time, EXT.I/O output, RS-232C to obtain the decision results.
The test time timer ranges from 0.045 s to 999.999 s (resolution 0.001 s), the time from applying voltage to determining eligibility
After the start of the response time timer test, it is forbidden to set a comparator to determine the action time from 0.005 s to 999.999 s (0.001 s resolution).
Analog output DC+4V F.S.
Interface RS-232C (Standard), External I/O (External Controller Input, Decision Output), BCD Output (ST5520-01 only)
Power supply AC100 V-240V, 50/60Hz, maximum 25VA
Volume and weight 215W *80H *166Dmm, 1.1kg
Accessories: Instructions for Use *1, Power Wire *1, EXT.I/O Connector *1, Connector Cover *1