体积小、封装方便的P6701B和P6703B光电模拟转换器为光学脉冲形状测量提供了精确的接口。
特性和好处
宽波长响应500 ~ 950 nm或1100 ~ 1700 nm
高带宽直流高达1.2 GHz
高增益1v /mW
低噪声
探头连接到DPO7000 1和DPO/MSO70000 2系列
SONET/SDH和光纤信道参考接收机性能:
TDS500C/700C(选择3C或4C)
P6701B -光纤通道高达1063 Mb/s
P6703B - SONET/SDH高达622 Mb/s
需要TPA-to-BNC适配器
需要TCA-to-BNC适配器
应用程序
光通信信号(SONET/SDH和光纤通道)眼模测试
产品描述
Tektronix P6700系列光电转换(O/E)转换器将光学信号转换为电信号，以便使用合适的适配器(见脚注1和2)、任何其他配备TekProbe接口的Tektronix示波器或与1103 TekProbe电源一起使用时，方便地对Tektronix DPO7000和DPO/MSO70000系列示波器进行分析。P6700系列O/E转换器在光通信系统和设备的开发、制造或服务中是理想的光源特性描述。
体积小、封装方便的P6701B和P6703B光电模拟转换器为光学脉冲形状测量提供了精确的接口。这些O/E转换器具有高增益、大动态范围和稳定的输出偏移量，非常适合进行眼模分析和消光测量。
P6701B / P6703B光学输入是一个1米,62.5μ多模光纤与FC / PC连接器。使用混合光纤配套套管的标准品种，这些O/ e可以适应各种工业连接器标准。
当与Tektronix DPO7000或DPO/MSO70000以及更早的TekProbe系列示波器一起使用时，TekProbe接口提供电源、自动缩放、自动终止和正确的单元(microwatts)。
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements.
Features and benefits
Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm
High-bandwidth DC up to 1.2 GHz
High Gain 1 V/mW
Low Noise
Probe Connects to DPO7000 1 and DPO/MSO70000 2 Series
SONET/SDH and Fibre Channel Reference Receiver Performance:
TDS500C/700C (Opt. 3C or 4C)
P6701B – Fibre Channel up to 1063 Mb/s
P6703B – SONET/SDH up to 622 Mb/s
1Requires the TPA-to-BNC adapter
2Requires the TCA-to-BNC adapter
Applications
Eye Pattern Testing of Optical Communication Signals (SONET/SDH and Fibre Channel)
Product description
The Tektronix P6700 Series optical-to-electrical (O/E) converters change optical signals into electrical signals for convenient analysis on Tektronix DPO7000 and DPO/MSO70000 Series oscilloscopes with appropriate adapters (see footnote 1 and 2), any other Tektronix oscilloscope equipped with a TekProbe interface, or when used with the 1103 TekProbe power supply. The P6700 Series O/E converters are ideal for optical source characterization in the development, manufacture, or service of optical communication systems and devices.
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements. The high gain, large dynamic range, and stable output offset of these O/E converters make them ideal for performing eye pattern analysis and extinction measurements.
The P6701B/P6703B optical input is a 1 meter, 62.5μ Multi Mode fiber with an FC/PC connector. Using the standard assortment of hybrid fiber-optic mating sleeves, these O/Es can accommodate the various industry connector standards.
The TekProbe interface provides power, auto-scaling, auto-termination, and correct units (microwatts) when used with Tektronix DPO7000 or DPO/MSO70000 and earlier TekProbe-equipped Series oscilloscopes.
Performance you can count on
Depend on Tektronix to provide you with performance you can count on. In addition to industry-leading service and support, this product comes backed by a one-year warranty as standard.
The standard P6701B has a nominal frequency response which follows the fourth-order Bessel-Thompson for Fibre Channel 1063 Mb/s. The 1103 TekProbe power supply can be used to connect these products to the DSA8300 Series sampling oscilloscopes.
采购中心
