AFG1062 任意波形/函数发生器

AFG1000系列任意波形发生器提供了性价比波形生成工具。 它包括两个双通道型号，60MHz带宽，10 Vp-p输出幅度。4种运行模式、50种内置常用波形和内置200 MHz频率计数器，满足试验和测试工作中的大多数波形发生需求。3.95英寸TFT LCD、快捷按钮、USB接口和PC软件提供了最直观的仪器配置方式。

主要性能指标

• 双通道，25 MHz或60 MHz正弦波形，12.5 MHz或30 MHz方波

• 14位，125 MS/s或300 MS/s任意波形，8 k点或1 M点记录长度

• 幅度1 mVp-p ~ 10 Vp-p 至50 Ω负载

主要特点

• 连续模式、扫描模式、突发模式和调制模式(AM, FM, PM, ASK, FSK, PSK, PWM)满足学生和其他用户完成试验/测试作业的大部分要求

• 64-MB 非易失内存，存储任意波形

• 内置 6 位分辨率的 200 MHz 计数器为测量频率/周期/脉宽/占空比提供了简便精确的方式

• 标配 USB 主控/设备接口，用于扩大内存和远程控制

• 利用外部 U 盘，免费 ArbExpress 使得编辑用户自定义波形变得异常简便

• 兼容 TekSmartLab™，轻松完成教学

• 标配 5 年保修

应用

• 电气和电子实验

• 通信实验

• 传感器仿真

• 功能测试

性能和特点

1 μHz ~ 25 MHz或60 MHz正弦波形范围，12位或1 μHz分辨率和±1 ppm漂移高稳定性时基，在频域中提供杰出的信号保真度。由于1 mVp-p到10 Vp-p输出幅度范围及整个频率范围内14位或1 mVp-p分辨率，您不必再在输出幅度和频率之间进行取舍。

四种不同的运行模式，利用经济的解决方案，覆盖大多数应用。内置50种的标准波形和任意波形，使用方便。 高达1 M点任意波形内存，用户可以复现使用泰克示波器捕获的或使用 ArbExpress定义的真实世界信号。 内置200 MHz和6位分辨率频率计数器为测量频率/周期/脉宽/占空比提供了简便精确的方式。

易用性

高清3.95英寸彩色TFT显示器用文本格式和图形格式显示相关设置和参数，让用户对其设置全面树立信心，让他们把重点放在手边的任务上。前面板快捷按钮和旋转旋钮可以用最少的工作和时间进入的功能和设置。内置64-MB非易失内存及U盘接口，为存储用户自定义波形提供无上限的空间。

The AFG1000 Series Arbitrary Function Generator provides a waveform generation tool with the best price performance ratio. It includes two models with dual channels, up to 60 MHz bandwidth and up to 10 Vp-poutput amplitude. The four run modes, 50 built-in frequently-used waveforms and the built-in 200 MHz frequency counter cover most waveform generation needs in your experiment and test jobs. The 3.95-inch TFT LCD, short-cut buttons, USB interface and PC software provide the most intuitive ways to configure the instrument.

Key performance specifications

• Dual-channel, 25 MHz or 60 MHz sine waveforms, 12.5 MHz or 30 MHz square waveforms

• 14 bits, 125 MS/s or 300 MS/s arbitrary waveforms with 8 k points or 1 M points record length

• Amplitude 1 mVp-p to 10 Vp-p into 50 Ω loads

Key features

• Continuous, sweeping, burst, and modulation modes (AM, FM, PM, ASK, FSK, PSK, PWM) covers most requirements for students and other users to get the experiments/test job done

• 64-MByte internal non-volatile memory for arbitrary waveform storage

• Built-in 200 MHz counter with 6-digit resolution offers an easy and precise way of frequency/period/pulse width/duty cycle measurement

• Standard USB host/device for memory expansion and remote control

• Free ArbExpress makes user defined waveforms editing extremely easy through an external USB memory stick

• Compatible with TekSmartLab™ for easy teaching and learning

• Standard 5-year warranty

Applications

• Electric and electronics experiments

• Communications experiments

• Sensor simulation

• Functional test

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Channels

• Number of channels

• 2

Built-in waveforms

• Built-in waveforms

• Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms

General characteristics

• Sine waves

• 
  

• 
Range

• AFG1022	AFG1062
  1 μHz to 25 MHz	1 μHz to 60 MHz

• Sine wave in burst mode

• 2 mHz to 25 MHz

  2 mHz to 30 MHz

• Effective maximum frequency out

• 25 MHz

  60 MHz

• Amplitude flatness (1 Vp-p), typical

• <10 MHz

• ±0.4 dB

  ±0.5 dB

• ≥10 MHz and ≤25 MHz

• ±0.7 dB

• ≥10 MHz and ≤60 MHz

• ±0.9 dB

• Harmonic distortion (1 Vp-p)

• ≤10 MHz

• < -50 dBc

  < -60 dBc

• >10 MHz

• < -50 dBc

  < -47 dBc

• Total harmonic distortion

• < 0.2% (10 Hz to 20 kHz, 1 Vp-p)

• Spurious (1 Vp-p), typical

• < -45 dBc

• Phase noise, typical

• 1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 Vp-p

• Residual clock noise, typical

• -57 dBm

• Square wave

• 
  

• 
Range

• AFG1022	AFG1062
  1 μHz to 12.5 MHz	1 μHz to 30 MHz

• Rise/fall time, typical

• <12 ns

  <10 ns

• Jitter (rms), typical

• <1 ns

  <500 ps

• Overshoot

• <5%

• Ramp wave

• 
  

• 
Range

• AFG1022	AFG1062
  1 μHz to 1 MHz	1 μHz to 2 MHz

• Linearity, typical

• ≤ 0.1% of peak output at 10% - 90% of amplitude range, at 1 kHz, 1 V p-p , 50% symmetry

• Symmetry

• 0.0% to 100.0%

• Pulse wave

• 
  

• 
Range

• AFG1022	AFG1062
  1 μHz to 12.5 MHz	1 μHz to 30 MHz

• Pulse width range

• 40 ns to 999 ks

  17 ns to 999 ks

• Pulse width resolution

• 1 ns or 4 digits

• Pulse duty

• <1 MHz, 0.1% to 99.9% (limitations of pulse duty width apply)
  ≥1 MHz, 50% fixed	≥1 MHz, 50% fixed

• Edge transition time, typical

• <12 ns, fixed

  <10 ns, fixed

• Overshoot, typical

• <5%

• Jitter (rms), typical

• <1 ns

  <500 ps

• Noise

• 
  

• 
Noise bandwidth (-3 dB)

• AFG1022	AFG1062
  25 MHz	50 MHz

• Noise type

• White Gausian

• DC

• 
  

• 
Range

• AFG1022	AFG1062
  -5 V to +5 V, 50 Ω load
  -10 V to + 10 V, open circuit or high Z load

• Arbitrary waveform

• 
  

• 
Range

• AFG1022	AFG1062
  1 μHz to 10 MHz	1 μHz to 30 MHz

• Arbitrary waveform in burst mode

• 2 mHz to 10 MHz

  2 mHz to 30 MHz

• Effective analog bandwidth (-3 dB)

• 30 MHz

  60 MHz

• Non-volatile memory

• 64 MByte

• Memory

• Length

• 2 to 8,192

  2 to 1 M-point

• Sampling rate

• 125 MS/s

  300 MS/s

• Vertical resolution

• 14 bits

• Rise and fall time

• < 10 ns

  < 8 ns

• Jitter (rms), typical

• < 6 ns

• Frequency

• 
  

• 
Resolution

• AFG1022	AFG1062
  1 μHz or 12 digits

• Internal reference stability

• ±1 ppm at 0 - 40 °C

• Internal reference aging

• ±1 ppm per year

• Amplitude

• 
  

• Range (50 Ω load)

• 
 ≤25 MHz

• AFG1022	AFG1062
  1 mVp-p to 10 Vp-p	1 mVp-p to 10 Vp-p

• >25 MHz

• -	1 mV p-p to 5 V p-p

• 
Range (Open circuit or high Z load)

• ≤25 MHz

• 2 mVp-p to 20 Vp-p

  2 mV p-p to 20 V p-p

• >25 MHz

• -	2 mV p-p to 10 V p-p

• Accuracy

• ±(1% of setting +1 mVp-p), (1 kHz sine waveform, 0 V offset)

• Resolution

• 1 mVp-p, 1 mVrms or 4 digits

• Units

• Vp-p, Vrms

• Output impedance

• 50 Ω (typical)

• Local impedance setting

• Selectable: 50 Ω, 1 Ω to 10.000 kΩ, High Z (adjusts displayed amplitude according to selected load impedance)

• Isolation

• No floating ground, signal ground connected to chassis ground

• Signal output protection

• Short-circuit tolerance, main output automatically disabled when over current

DC offset

• Range

• ±(5 Vpk– Amplitudep-p/2), 50 Ω load

  ±(10 Vpk– Amplitudep-p/2), open circuit or high Z load

• Accuracy

• ±(1% of |setting| + 1 mV + 0.5% of amplitude (Vp-p))

• Resolution

• 1 mV or 4 digits

Modulation

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

• Amplitude modulation

• 
  

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• Sine, square, ramp, noise, arbitrary

• Internal AM frequency

• 2 mHz to 20 kHz

• Depth

• 0.0% to 100.0%

• Frequency modulation

• 
  

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• Sine, square, ramp, noise, arbitrary

• Internal modulating frequency

• 2 mHz to 20 kHz

• Frequency deviation

• (limited by carrier waveform type)

  AFG1022	AFG1062
  2 mHz to 12.5 MHz	2 mHz to 30 MHz

• Phase modulation

• 
  

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• Sine, square, ramp, noise, arbitrary

• Internal PM frequency

• 2 mHz to 20 kHz

• Phase Deviation

• 0° to 180°

• Amplitude shift keying

• (AFG1062 only)

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• 50% duty cycle square

• ASK rate

• 2 mHz to 100 kHz

• Frequency shift keying

• 
  

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• 50% duty cycle square

• FSK rate

• 2 mHz to 100 kHz

• Phase shift keying

• (AFG1062 only)

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• 50% duty cycle square

• PSK rate

• 2 mHz to 100 kHz

• Pulse width modulation

• (AFG1062 only)

• Carrier waveforms

• Pulse, ≤1 MHz

• Source

• Internal / external

• Internal modulating waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• PWM frequency

• 2 mHz to 20 kHz

• Deviation

• 0.0% to 50.0% of pulse period

Sweeping

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

• Carrier waveforms

• Sine, square, ramp, arbitrary (AFG1062 only)

• Minimum start-stop frequency

• 1 μHz

• Maximum start-stop frequency

• 
  

• 
Sine

• AFG1022AFG1062关键词：传感器