-- 工作原理 --
Working principle
螺旋输送机是医药、食品、治金、建材、化工、粮食以及机械加工等部门广泛应用的一种连续输送设备。从输送物料的位移方向的角度划分,螺旋输送机分为水平式和垂直式量大类型,主要用于对各种粉状,颗粒和小块状等松散物料的水平输送和垂直提升。螺旋输送机与其它输送设备相比,具有整机截面尺寸小、密封性能好、运行平稳可靠、可中间多点装料和卸料及操作安全、维修简便等优点。
Screw conveyor is a kind of continuous conveying equipment which is widely used in medicine food, metallurgy, building materials, chemical industry, grain and mechanical processing departments Divided from the perspective of the direction of displacement of the conveying material, the screw conveyor is divided into horizontal type and vertical type, which is mainly used for horizontal conveying and vertical lifting of loose materials such as various powders, granules and small pieces Compared with other conveying equipment, the screw conveyor has the advantages of small size of the cross section, good sealing performance, stable and reliable operation, multi-point loading and unloading, safe operation, and easy maintenance
-- 技术参数 --
Technical Parameter
以上螺旋的输送量是在物料为粉体、无磨琢性、水平输送的条件下得到的**理论数据。选型时需综合考虑物料种类、物料粒度、磨琢性、粘性、倾角等因素。一般情况下,粒度越大、磨琢性越强、倾角越大,需要的管径越大。管式的倾角不超过45度,U型槽式的倾角不超过35度。
male The capacity of screw conveyor mentioned above is the maximum theoretical data calculated under the condition that the al is powder and non-abrasive, also in horizontal conveying. Factors such as material type, material size, abrasion, viscosity and inclination should be considered in the process choosing models. In general, the larger particle size and the higher abrasion the inclination angle will be larger, it requires larger pipe diameter. The inclination angle for tubular type screw conveyor should not exceed 45 degrees, and the inclination angle for U-shaped screw conveyor should not exceed 35 degrees.
采购中心
