GHL系列高效湿法混合制粒机 返回列表页

本公司经营GHL系列高效湿法混合制粒机，质量保证，洽谈。

GHL系列高效湿法混合制粒机
主要用途：
医药、食品、化工等领域粉体注入粘结剂湿颗粒设备。
特点：
本机采用卧式圆筒构造，结构合理。充气密封驱动轴，清洗时可切换成水。流态化造粒，成粒近似球形，流动性好。较传统工艺减少25%粘合剂，干燥时间缩短。每次干混2分钟，造粒1-4分钟。功效比传统工艺提高4-5倍。在同一封闭容器内完成，干混-湿混-制粒，工艺缩减，符合GMP规范。整个操作具有严格的安全保护措施。
工作原理：
粉粒物料与粘合剂在圆筒容器中由底部混合浆充分混合成湿润软材，然后由侧置的高速粉碎浆切割成均匀的湿颗粒。
Application:
It is suitable for pharmaceutical industry,foodstuff industry and so on.The granule is made from power to damp granule in which the sdhesive shoule be injected in it.
Main properties:
The machine adapts horixontal cylinder structure.Its structure is reasonable,adapt driving shaft through filled air sealing.When chean,it can turn to water,granulating in liqufied-state,Its gtanule approaches ball,its fluitity is good.Compared with traditional process,25% of adhesive can be saved and the drying time can be shorted too,the dty mixing time will be 2 minutes and the granulating time be 1-4 minutes,compared with traditional process,its working efficiency will raise 4-5 times,the pricedures of dry mixing-granulating can be finished in the same sealed contaier,its procedure is shorted,It is conformity with the requiement of GMP,Whole operation has atrict safe protective measure.
Working principle:
Powder raw naterial and adhesive are mixed to moisture soft material through mixing oar the cylinder（cone） container.Then cut it to become uniform damp granule through high speed crushing oar inatalled at the side.