详细性能说明一．罐体形状:1.立式圆桶状内筒与物料接触部分板材进口 316L,内胆厚δ=5mm,内抛Ra0.28 um～0.45um 2.罐体三封头为来料旋压制造厚度δ=5mm，内抛Ra0.28um～0.45um，外镜面或拉丝。二．罐体加热形式：夹套盘管加热，盘管材料进口304，厚度为δ=3mm 三．保温材料：为特级珍珠棉,具有耐高温抗老化及保温时效长特点，厚度为δ=50mm，罐体外表温度24h±8℃. 四．罐体外表材料：进口304，厚度为δ=2mm，镜面或拉丝处理。五．罐体外表温度:≤10℃ 工作压力:常压 工作温度:60℃-100℃ 灭菌压力:0.15-0.3Mpa 灭菌温度:121℃-132℃ 六．配置: 1.减速装置:电机选用减速电机1.5KW 1台,36-53转/分,进口机械双面密封保证*不漏油. 2.配呼吸器1套 3.配材质为316L表显温度计,量程为0-150℃,精度为*,温差不大于±0.15℃ 4.配材质为316L列管式液位计1套. 5.配316LCIP360度旋转清洗球1只6.设备接口快装式,（有各进出液口,蒸汽进口,排污口,备用口等快装卡盘式）

本系列容器具有加热和保温功能，按《钢制焊接容器技术条件》《钢制压力容器》进行设计制造，试压和难收。 1.容积有100L-15000L各种规格，供您选项用，也可根据客户实际需要进行设计、加工。 2.搅拌轴的密封采用进口卫生级机械密封英国约翰克兰、德国博格曼，减速机选用世界德国弗兰德或SEW，搅拌转速为14～200转/分。也可采用变频高速器控制。 3.接口采用通用ISO标准快装卡盘式，内胆选取用进口316L或304。 4.罐体有液位计（无触点超声波，静压液位计或称重计量）、空气呼吸器、灭菌蒸汽口、温度计（数显式或表盘式）、CIP万向洗罐器、灯孔视镜、若干进出液口、人孔。   The series of vessels has the functions of heating and heat preservation. Manufacturing, pressure test and acceptance are in accordance with and . 1.The volume varies form 10L to 15000L for your selection and design and processing can be made according to actual requirements of customers. 2.It adopts imported sanitary mechanical seal products from UK John Crane and Germany Burgmann as the seal of blending shaft. The blending rotation speed is 14～200r/m, and the speed can also be regulated by frequency converter. 3.The interface adopts internationally general-use ISO standard rapid installation chuck type. The internal bladder adopts imported 316L or 304. 4.In the tank body, there are liquid level meter（non-contact supersonic wave, static pressure liquid level meter or weighing metering）, air spiracle, sterilization steam vent, thermometer （digital indication type or dial plate type）, CIP universal cleaning device, sight glass, several liquid inlets and outlets and manholes etc.