常州奥凯干燥设备有限公司
免费会员

当前位置:常州奥凯干燥设备有限公司>>颗粒机>> GHL高速湿法混合制粒机

高速湿法混合制粒机

参  考  价面议
具体成交价以合同协议为准

产品型号GHL

品       牌

厂商性质经销商

所  在  地

联系方式:陈建华查看联系方式

更新时间:2018-05-14 09:00:00浏览次数:5634次

联系我时,请告知来自 制药网
GHL高速湿法混合制粒机
GHL高速湿法混合制粒机
GHL High Speed Mixing And Granulating Machine
特点:
★ 本机采用卧室圆筒(锥形)构造,结构合理。
★ 充气密封驱动轴,清洗时可切换成水。
★ 流态化造粒,成粒近似球形,流动性好。
★ 较传统工艺减少25%粘合剂,干燥时间缩短。
★ 每批次仅干混2分钟,造粒1-4分钟,工效比传统工艺提高4-5倍。
★ 在同一封闭容器内完成,干混一湿混一制粒,工艺缩减,符合GMP规范。
★ 整个操作具有严格的安全保护措施。
Features:
★ The machine adapts horizontal cylinder structure.Its sstructures is reasonable;
★ Use air filled seal shaft to drive.When washing,it can be changed to water;
★ Use fluidization to Granulate and the granule is near ball.Its flow is good;
★ Compared the traditional process,25%of adhesive can be reduced and the daying time can be shorted;
★ The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes.Compared with the traditional process,4-5 times of efficiency is raised;
★ In the same sealed c ontainer,dry mixing,humidity mixing and granulating can be finished.It is in conformity with the reauirements of GMP;
★ The whole operation has strict safe and protective measures.
工作原理:
★ 物体物料与粘合剂在圆筒(锥形)形容器中由底部混合桨充分混合成湿润软材,然后由侧置的高速粉碎桨切割成均匀的湿颗粒。
Working Principle:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material.
Then it is cut through hi8gh-speed crusher and become uniform granules.
GHL高速湿法混合制粒机
GHL High Speed Mixing And Granulating Machine
特点:
★ 本机采用卧室圆筒(锥形)构造,结构合理。
★ 充气密封驱动轴,清洗时可切换成水。
★ 流态化造粒,成粒近似球形,流动性好。
★ 较传统工艺减少25%粘合剂,干燥时间缩短。
★ 每批次仅干混2分钟,造粒1-4分钟,工效比传统工艺提高4-5倍。
★ 在同一封闭容器内完成,干混一湿混一制粒,工艺缩减,符合GMP规范。
★ 整个操作具有严格的安全保护措施。
Features:
★ The machine adapts horizontal cylinder structure.Its sstructures is reasonable;
★ Use air filled seal shaft to drive.When washing,it can be changed to water;
★ Use fluidization to Granulate and the granule is near ball.Its flow is good;
★ Compared the traditional process,25%of adhesive can be reduced and the daying time can be shorted;
★ The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes.Compared with the traditional process,4-5 times of efficiency is raised;
★ In the same sealed c ontainer,dry mixing,humidity mixing and granulating can be finished.It is in conformity with the reauirements of GMP;
★ The whole operation has strict safe and protective measures.
工作原理:
★ 物体物料与粘合剂在圆筒(锥形)形容器中由底部混合桨充分混合成湿润软材,然后由侧置的高速粉碎桨切割成均匀的湿颗粒。
Working Principle:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material.
Then it is cut through hi8gh-speed crusher and become uniform granules.
GHL
GHL High Speed Mixing And Granulating Machine
特点:
★ 本机采用卧室圆筒(锥形)构造,结构合理。
★ 充气密封驱动轴,清洗时可切换成水。
★ 流态化造粒,成粒近似球形,流动性好。
★ 较传统工艺减少25%粘合剂,干燥时间缩短。
★ 每批次仅干混2分钟,造粒1-4分钟,工效比传统工艺提高4-5倍。
★ 在同一封闭容器内完成,干混一湿混一制粒,工艺缩减,符合GMP规范。
★ 整个操作具有严格的安全保护措施。
Features:
★ The machine adapts horizontal cylinder structure.Its sstructures is reasonable;
★ Use air filled seal shaft to drive.When washing,it can be changed to water;
★ Use fluidization to Granulate and the granule is near ball.Its flow is good;
★ Compared the traditional process,25%of adhesive can be reduced and the daying time can be shorted;
★ The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes.Compared with the traditional process,4-5 times of efficiency is raised;
★ In the same sealed c ontainer,dry mixing,humidity mixing and granulating can be finished.It is in conformity with the reauirements of GMP;
★ The whole operation has strict safe and protective measures.
工作原理:
★ 物体物料与粘合剂在圆筒(锥形)形容器中由底部混合桨充分混合成湿润软材,然后由侧置的高速粉碎桨切割成均匀的湿颗粒。
Working Principle:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material.
Then it is cut through hi8gh-speed crusher and become uniform granules.

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

X
该信息已收藏!
标签:
保存成功

(空格分隔,最多3个,单个标签最多10个字符)

常用:

提示

X
您的留言已提交成功!我们将在第一时间回复您~
在线留言