干燥设备 粉碎设备 混合设备 反应设备 过滤分离设备 过滤材料 灭菌设备 萃取设备 贮存设备 传热设备 锅炉 塔设备 结晶设备 其他制药设备
张家港市三兴汇丰机械有限公司
张家港市三兴汇丰机械有限公司
半自动吹瓶机适合吹制各种形状的PET瓶，容积从20毫升到2000毫升，此吹瓶机广泛应用与吹制矿泉水瓶、碳酸饮料瓶、可乐瓶等
半自动吹瓶机适合吹制各种形状的PET瓶，容积从20毫升到2000毫升，此吹瓶机广泛应用与吹制矿泉水瓶、碳酸饮料瓶、可乐瓶等。
1、采用新型的双曲臂四拉杠合模结构，十字架平衡固定滑动。
2、封口、拉伸采用双杠联体设计，合二为一，有利于产品成型。
3、*的气路设计，单路、双路进气均可；低压力机械合模、封口、拉
伸；高压力吹瓶成型。
4、微电脑自动控制器, 操作方便。
5、瓶坯用红外线加热，可控恒压控制，变频调速，从而达到吹制精
度。
This machine is suit for the all the kinds PET bottles, the volume form 20ml to 2000ml. Also be applied to blow the mineral water,carbonated drink bottle and coca cola bottle:
1. adopting the new structure of double- bend rod and four pulling rod to close,the
cross could move in balance and fixed
2. Sealing, stretching adopt double rods design, join two part in one
body,conducive the product forming
3. Advance air path design,the single and double paths both could enter theair,low
Pressure to close the mould ,sealing and stretching ,the high pressure to form
4. Use the PLC to control, the mini computer is easy for operating
5. Infrared heating, could be controlled by the permanent pressure, so as to get
the Best precision
BM
BLOW MOLDING MACHINE
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
制药网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
