Publication 1747-UM011G-EN-P - June 2008
Perform this procedure to install the power supply.
1. Align the circuit board with the card guide on the left side of the 
chassis. Slide the power supply in until it is flush with the 
chassis.
2. Fasten the power supply to the chassis with the two Phillips 
head screws.
3. Place the jumper to match the input voltage. (This does not 
apply to 1746-P3, 1746-P5, 1746-P6, or 1746-P7 power supply 
which do not have a jumper.)
1.2 Nm (11 lb-in) 
maximum torque
ATTENTION
Make jumper selection before applying power. 
Hazardous voltage is present on exposed pins when 
power is applied.Sidel 4KS-M150/40 伺服驱动器
Sidel 4KS-M150/7.5 伺服驱动器
Sidel 4KS-M240/10 伺服驱动器
Sidel 4KS-M240/20 伺服驱动器
Sidel 4KS-M240/30 伺服驱动器
Sidel 4KS-M240/40 伺服驱动器
Sidel 4KS-M240/5 伺服驱动器
Sidel 5000-170/17-B
Sidel 5000-170/25-B
Sidel 5000-170/40-B
Sidel 54K-150/10
Sidel 54K-150/20
Sidel 54K-150/30
Sidel 54K-150/40  
Sidel 54K-240/10
Sidel 54K-240/20
Sidel 54K-240/30
Sidel 54K-240/40
Sidel 54K-P150/80-B 电源
Sidel 54K-P240/80-B 电源
Sidel 55K-240/10
Sidel 55K-240/15
Sidel 55K-240/5
Sidel 56WK-P150/80-B 电源
Sidel1756-OW16I  1756-OW16I  1756-OW16I  1756-OW16I  *****************************************************

全国zui大的备件库！---------：张可可
选择zui有权利的公司！-----：
选择*的质量！--------
选择的产品！---------
选择的服务！------------
选择zui快的货期！---------------:
选择*的价格！------------------:

**************************************************************

Sidel 56WK-P240/80-B 电源
Sidel 56WK-P240/80-B 电源
Sidel 5K-200/10-B
Sidel 5K-200/25-B
Sidel 5K-200/35-B
Sidel 60WKS-CE240/12-PB 伺服驱动器