应用 Applications

机制螺杆挤压颗粒、摇摆颗粒、湿法高速混合制粒颗粒。

医药、食品、饲料、化工等领域湿颗粒和粉状物料干燥。

大颗粒，小块状，粘性块粒状物料。

魔芋等干燥时体积变化的物料。

Machine-made screw extrudes particles, sways particles and wet high-speed mixinggranulation particles.ODrying of wet granules and powdery materials in the fields of medicine, food, feed.chemical industry, etc.

Granular materials with large particles, small blocks and sticky blocks.

Amorphophallus konjac and other materials with volume change during drying.

特 点 Features

流化床为圆形结构，避免死角。

料斗设置搅拌，避免潮湿物料团聚及干燥时形成沟流。

采用翻倾卸料，方便迅速，亦可按要求设计自动进出料系统。密闭负压操作，气体经过过滤。操作简便，清洗方便，是符合“GMP”要求的理想设备。

干燥速度快，温度均匀，每批干燥时间一般在20-30分钟。

Fluidized bed is of circular structure to avoid dead corners.The hopper is equipped with stirring to avoid agglomeration of wet materials andformation of channel flow during drying.Otipping unloading is adopted, which is convenient, rapid and thorough. automaticfeeding and discharging system can also be designed as required.OClosed negative pressure operation, the gas is filtered. lt is simple to operate andeasy to clean. It is an ideal equipment meeting the requirements of GMP.ODrying speed is fast and temperature is uniform. Drying time for each batch isgenerally 20-30 minutes.

原 理 Principles

空气经加热净化后，由引风机从下部导入，穿过料斗的孔网板。在工作室内，经搅拌和负压作用形成流态化，水份快速蒸发后随着排气带走，物料快速干燥。

After being heated and purified, the air is introduced from the lowerpart by an induced draft fan and passes through the hole mesh plateof the hopper. In the working chamber, fluidization is formed bystirring and negative pressure, water is quickly evaporated and thentaken away with exhaust gas, and the materials are quickly dried.

安装示意图 Schematic of installation

技术参数 Technical parameters