上海凡而阀门有限公司

主营产品: 球阀、针型阀、截止阀、闸阀、止回阀、蝶阀、阻火器、排气阀、排泥阀、过滤器、放料阀、隔膜阀、安全阀、旋塞阀、手机:13917909444

您现在的位置: 上海凡而阀门有限公司>>进口离心泵>> TYLER进口离心泵进口单级离心泵进口单级单吸离心泵

公司信息

人:
苏生
址:
上海市徐汇区龙漕路51号13917909444
编:
200235
铺:
https://www.zyzhan.com/st68399/
给他留言
TYLER进口离心泵进口单级离心泵进口单级单吸离心泵
进口离心泵进口单级离心泵进口单级单吸离心泵
参考价 面议
具体成交价以合同协议为准
  • 型号 TYLER
  • 品牌
  • 厂商性质 代理商
  • 所在地 上海

联系方式:苏生查看联系方式

更新时间:2017-05-08 16:56:30浏览次数:896

联系我们时请说明是制药网上看到的信息,谢谢!

【简单介绍】
进口单级单吸离心泵美国直联式离心泵

进口单级单吸离心泵参数:
流量:2-1080m3/h
扬程:5-150m
口径:进口直径:50-300mm
 出口直径:32-250mm
转速:2900r/min和1450r/min或1480r/min两级
功率:1.5-160kw
效率:24-88%
材质:铸铁、不锈钢
电压:380V、480V、415V、660V
频率:50Hz、60Hz
Z高转速:350
【详细说明】

进口单级单吸离心泵美国直联式离心泵

 

进口单级单吸离心泵参数:

流量:2-1080m3/h
扬程:5-150m
口径:进口直径:50-300mm
 出口直径:32-250mm
转速:2900r/min和1450r/min或1480r/min两级
功率:1.5-160kw
效率:24-88%
材质:铸铁、不锈钢
电压:380V、480V、415V、660V
频率:50Hz、60Hz
zui高转速:3500r/min(用于60HZ电源时,叶轮直径有所减小)
zui高使用温度:105
轴封:填料密封或机械密封
zui低使用温度:-10
zui大工作压力:一般为1MPa,如承压件规定用球墨铸铁或铸钢制造,可达1.6MPa,请在订货时说明

 

进口单级单吸离心泵结构特点介绍:

 

进口单级单吸离心泵的基本结构差不多主要是由泵与电机和底座三大部分构成,其中泵

主要是由泵体、叶轮、轴、密封件、悬架、泵盖、轴承体等几部分组成。其中叶轮、轴、轴套

等组成了泵的转子部件。在安装使用时候注意一些细小的环节,如不能让其他物质从泵的进出

水口进入泵体内,注意泵与电机的同心、填料密封的安装、紧固螺栓的拧紧程度等,注意各个

细节,保证卧式离心泵的运行效率。

该系列的单级单吸离心泵除IS型的泵是采用的填料密封之外,其余的轴封方式都是采用的机械

密封。

 

进口单级吸离心泵,美国进口单级吸离心泵品牌(美国泰乐)适用范围:

泵的零件用不锈钢板压制,经激光焊接而成,并有多种牌号的不锈钢可供选用,因而泵的用途十分广泛,主要适用于输送各种洁净水及轻腐蚀液体,可用于 住宅供水及增压 工业锅炉给水空调系统循环体会水 水处理和反渗透系统 食品工业、医药工业用水。

 

美国泰乐TYLER进口单级单吸离心泵售后服务:

用户*,信誉*,优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证,我公司服务质量管理体系的宗旨是:建立并不断完善科学、合理、高效的服务质量管理体系,公正、准确、及时地完成客户的售后服务质量保障工作,为我公司的客户服务建立良好、全面、充分的服务体系。

 

 

Imported single stage single suction centrifugal pump United States imported straight centrifugal pump

Single stage single suction centrifugal pump:

Flow: 2-1080m3/h

Lift: 5-150m

Caliber: inlet diameter: 50-300mm

Outlet diameter: 32-250mm

Speed: 2900r/min and 1450r/min or 1480r/min level two

Power: 1.5-160kw

Efficiency: 24-88%

Material: cast iron, stainless steel

Voltage: 380V, 480V, 415V, 660V

Frequency: 50Hz, 60Hz

Maximum speed: 3500r/min (for 60HZ power supply, the impeller diameter decreased)

Maximum operating temperature: 105

Packing: packing seal or mechanical seal

Minimum operating temperature: -10

Maximum working pressure: generally 1MPa, such as the provisions of the pressure bearing ductile cast iron or cast steel manufacturing, up to 1.6MPa, please specify when ordering

Introduction to the structure characteristics of imported single stage single suction centrifugal pump:

The basic structure of the centrifugal pump is mainly composed of three parts, the pump and the motor and the base

Mainly by the pump body, impeller, shaft, seals, suspension, pump cover, bearing body, etc.. The impeller, shaft, shaft sleeve

The rotor component of the pump is formed. In the installation and use of attention to some small links, such as can not let other substances from the pump in and out

Nozzle into the pump body, pay attention to the pump and the heart of the motor, the installation of packing seal, tighten the degree of tightening bolts, etc.

Details to ensure the operation efficiency of horizontal centrifugal pump.

Pump single stage single suction centrifugal pump in the IS type of the series is the use of the packing seal, seal the way the rest are used in machinery

Seal up。

The import of single-stage single suction centrifugal pump, the United States imported single-stage single suction centrifugal pump brands (American scope Taylor):

Stainless steel plate pressing pump parts, laser welding, and a variety of grades of stainless steel can be used, so the pump is widely used, mainly for conveying a variety of corrosive liquid light and clean water, can be used for residential water supply and booster industrial boiler air conditioning system of circulating water treatment and reverse osmosis the system food industry, pharmaceutical industrial water.

The United States imports of tylosin TYLER single stage single suction centrifugal pump with customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.

客户须知:

询问美国泰乐TYLER电磁阀一级代理商。销售一部(上海凡而阀门有限公司),参数提供如下:

1.公称通径2、公称压力3、流体性质(包括温度、介质) 4.材质 5.连接方式 6电源.电压7、控制方式(常开式、常闭式、自保持式).8、防护形式(防爆型、防水型、防尘型、防潮型、防腐型、普通型)

 

 

美国泰乐相关领域业绩:杭州地铁1号线、杭州地铁2号线、杭州地铁4号线,南京地铁1号线、南京地铁2号线、南京地铁3号线、南京地铁4号线、南京地铁10号线。

 

帝国化学工业、美国科氏工业、美国联合能源、艾默生电气、卢克石油、中国海洋石油

 

 

美国泰乐代理商上海凡而阀门有限公司,咨询:

 

Customer information:

Welcome to inquire us Taylor TYLER solenoid valve agents. Sales of a (Shanghai and valve Co., Ltd.), the parameters are provided as follows:

1 nominal diameter, nominal pressure 3, 2 fluid properties (including temperature, medium) 5 connection 4 material 6 power. 7, voltage control mode (normally open and normally closed, self retaining.8), protection (explosion-proof, waterproof, dustproof, moistureproof and anticorrosive type type type, ordinary type)

The United States Taylor related field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.

Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.

The United States and Shanghai where agents Taylor Valve Co. Ltd., consulting:

 

 

 

 

进口单级单吸离心泵guan网:http://www.twvalve。。net/html/2278.html



产品对比 二维码

扫一扫访问手机商铺

对比框

在线留言