高压漏电起痕试验仪

高压漏电起痕试验仪BLD-6000V概述：Overview of bld-6000v high voltage leakage tracking tester:

高压漏电起痕试验仪  在电器产品受潮湿和杂质环境的影响下，不同极性带电部件之间或带电部件与接地金属之间可能会引起绝缘上的漏电，产生的电弧对电器造成击穿短路或由于放电使材料电蚀损，甚至起燃导致火灾。漏电起痕试验就是模拟上述情况对绝缘材料进行的一种破坏性试验，用以测量和评定在规定电压下，绝缘体在电场和含杂质水的作用时的相对耐漏电起痕性，适用于电工电子产品、家用电器的固体电器绝缘材料及其产品，如：继电器插座、转换开关盖、接触器等……。Under the influence of humidity and impurity environment on electrical products, electric leakage on insulation may be caused between live parts of different polarity or between live parts and grounding metal. The electric arc generated will cause breakdown and short circuit to electrical appliances or material erosion due to discharge, or even fire disaster. Leakage tracking test is a kind of destructive test simulating the above conditions on insulating materials, which is used to measure and evaluate the relative resistance of insulator to leakage tracking under the action of electric field and impurity water under the specified voltage. It is applicable to solid electrical insulating materials and products of electrical and electronic products and household appliances, such as relay socket, switch cover, contactor, etc. ...

特点：Characteristic:

试验仪由试验部分和控制部分组成采用一体化设计， 方便现场安装和调试。 试验箱外壳及结构件采用 S304不锈钢或黄铜制造；电极头为不锈钢，耐高温耐腐蚀；滴液计数准确，控制系统稳定可靠。The tester is composed of the test part and the control part, and adopts the integrated design to facilitate the field installation and commissioning. The shell and structural parts of the test chamber are made of S304 stainless steel or brass; the electrode head is made of stainless steel, resistant to high temperature and corrosion; the drop count is accurate, and the control system is stable and reliable.

高电压起痕试验机（含高电压发生器）High voltage marking tester (including high voltage generator)

依据标准：GB/T6553-2003Standard: GB / t6553-2003

性能指标performance index

1、电极：厚 0.5mm 材质：不锈钢；1. Electrode: 0.5mm thick material: stainless steel;

2、上下电极距离：50.0mm±0.1；2. Distance between upper and lower electrodes: 50.0mm ± 0.1;

3、试验电压：100V-6000V 可调；3. Test voltage: 100v-6000v adjustable;

4、调压器：输出：0～250V 可以调，容量 5KVA；4. Voltage regulator: output: 0-250V adjustable, capacity 5KVA;

5、试验变压器：容量 5KVA，   高输出电压 AC6000V（或 DC6000V 可选） ；5. Test transformer: capacity 5KVA, maximum output voltage ac6000v (or dc6000v optional);

6、高精度稳压器：输出 AC220V 功率 6000W，精度±1%；6. High precision voltage regulator: output AC220V power 6000W, precision ± 1%;

7、回路电流为 60mA 时，切断电压输出；7. When the circuit current is 60mA, cut off the voltage output;

8、试验时间：6 小时；8. Test time: 6 hours;

9、滴液精度：0.5%；9. Drop accuracy: 0.5%;

10、电压稳定度：±1%；10. Voltage stability: ± 1%;

11、起痕判断：依标准 GB/T6553-2003/4.1.2 规定，在试样上施加电压（2.5k V,3. 5k V 和 4.5k V） ，并以一定流速滴污染液，在 60mA 以下的电流持续 6H 不过流即为通过；

11. Judgment of trace initiation: according to the provisions of GB / t6553-2003 / 4.1.2, apply voltage (2.5KV, 3.5kv and 4.5kv) to the sample, and drop the contaminated liquid at a certain flow rate. If the current below 60mA continues to flow for 6h, the sample will pass.

12、滴液装置：12. Drip device:

采用雷弗精密蠕动泵，流量范围 0.00185 ～20 毫升/分钟，工作转速 0.1～50 转/分钟，流量精度误差：＜0.5%；The precision peristaltic pump is adopted, the flow range is 0.00185-20ml/min, the working speed is 0.1-50r/min, and the flow accuracy error is less than 0.5%.

13、输出电压：交流/直流（可切换）13. Output voltage: AC / DC (switchable)

14、实验组数：五组14. Number of experimental groups: five groups

15、控制装置：采用西门子 PLC+中国台湾威纶触摸屏控制，控制精密，操作简单，设计*人性化，试验结束自动生成报告，面板热敏打印机可以适时打印试验结果；15. Control device: Siemens PLC + Taiwan vinylon touch screen control, precise control, simple operation, fully humanized design, test results

The test results can be printed by panel thermal printer.

16、外形尺寸(mm)：710(宽)×365(深)×760(高) 箱体内容积:0.1m316 Boundary dimension (mm): 710 (W) × 365 (d) × 760 (H) box volume: 0.1m3

17、机箱：采用 SUS304 不锈钢（拉丝面） ；17 Case: SUS304 stainless steel (drawing surface);

18、污液槽采用 316 不锈钢，加装密闭装置。18. The sewage tank is made of 316 stainless steel and equipped with sealing device.

滴液装置时间常数可调，使滴液量和滴液时间间隔得到精确控制。The time constant of the dropping device can be adjusted, so that the drop quantity and the time interval of the drop can be precisely controlled.

配置：建议选配电子测重装置

公司承诺：The company undertakes:

1.购机前，我们专门派技术人员为您设计的流程和方案

2.购机后，将免费指派技术人员为您调试安装

3.整机保修一年，产品终身维护

4.常年供应设备的易损件及耗品确保仪器能*使用

5、售后管理：我公司实现计算机化管理，实行客户定期电话回访制度，定期复查设备的工作情况，定期电话指导用户对设备进行保养和检测，以便设备正常运转，跟踪客户的设备使用情况，以便及时对设备进行维护

6、物流情况：及时提供货源，确保全国范围内2-10内到货，持续稳定地为代理商做全面服务工作，提供合理的运作空间。公司有专业的技术人员为您安装指导。

7、软件升级：终生免费提供新版本控制软件。

8、安装培训:仪器包装内附有说明书，专业培训人员为客户操作者讲解仪器正常操作流程、操作注意事项及仪器的日常维护要求；也可以根据客户要求提供上门培训服务。

好质量好品牌好服务在北京北广精仪。