另本厂推出968系列旋风王饲料粉碎机是根据90年代美国流行968水滴王的结构其精华改造而成，使该机外观设计人性化、节能降耗自动化，是大中小型饲料厂和饲料加工户的换代产品。经多方面破坏性试验结果具有以下特点：

         Additionally, the factory has released the latest 968 series CYCLONE KING feed crusher, which is altered based on the structure and essence of the DRIPPING KING of the 1990s, the configuration of the machine is humanized, which could save energy, reduce consumption and automatic control, it’s a substituting products of large, medium-sized and small feed processing factories. The results after destroying tests on various aspects have shown the machine has the following characteristics:

        一、本机*改变了传统的进出料方式，克服了传统机型耗能多，粉尘大、效率低、劳动强度高、浪费人力等多项缺点。本机zui大限度的加大筛片面积，使物料流动地更加快捷，底部设置的螺旋风机快速将粉碎的物料送入卸料器，直接装袋。

          I. This machine has compley changed the traditional feeding and discharging modes, conquered the traditional disadvantages as large energy consumption, too much dust, low efficiency, high labor intensity and waste of human resources, etc. This machine has enlarged the screening area as much as possible, to make the ingredients flow faster, and the bottom-mounted cyclone fan could feed the crushed ingredients to the discharger until directly to packing.

         二、较50-40饲料机相比在不增加动力的情况下，同等电耗节约人工75%效率提高100％。

         II. Comparing with 50-40 feed machine, the same power consumption will save 75% human power and the efficiency will be increased by 100% under the circumstances of not increasing the power.

         三、筛片布置合理，更换方便快捷，与框架结合严密无跑粗现象。

         III. The screen piece is laid rationally, it’s fast and convenient to replace, and it’s tightly touches the framework without the phenomena of rough running.

         四、采用自动螺旋上料，上料均匀，电压波动小，电机无发热现象，杜绝了过负荷烧电机，大大降低了维修电机费用，节约资金，减少了不必要的麻烦。

         IV. Automatic auger feeding is adopted, which? is even, with small voltage fluctuation, the motor doesn’t send out heat, which has prohibited the overload from burning the motor and has greatly reduced the motor, the capital has saved and unnecessary troubles have been reduced.

         五、本机锤片采用碳化钨热处理，坚固耐用，减少了更换锤片的次数。

          V. The hammer of the machine is made of tungsten carbonate treatment, which is firm and durable and has reduced the frequency of replacing hammer.

         六、轴承采用D级22系列双滚珠轴承，极限转速6000转/分，静负荷达3400kg，温升低，噪音小。

          VI. The bearing is made of D-class 22 series double ball bearing, with the limit rotation speed of 6000 rpm, the static load of 3400 kg, and the temperature increase of the machine is low, the noise is top small.

         七、厂家郑重承诺：三包期内出现质量问题，本市区（县）当日发现当日处理：外地市两日内到达处理。

          VII. The manufacturer seriously make commitments that problems occur within the warranty period will be handled within the day after discovery (the city, county area) and problems occur within the warranty period will be handled within 2 days if the customers are not in the city.

         八、如下情形不属于三包范围;1.正常磨损的易损件：2.操作不当造成不应有的人为损坏。

         VIII.　The following circumstances don’t belong to the warranty scope: 1. Normal wearing of wearing parts; 2. Man-made damages caused by improper operations.

         九、数字规格变动改型，恕不另行通

         IX. We are not responsible to inform about the digital specification alteration or model alteration