详细介绍
德国STOEGRA ANTRIEBSTECHNIK GMBH步进电机 功放板
:王工
同号
449147851
价注意事项:
1.请发书面询价函(邮件,,传真等),不接受口头报价。
2.如果型号不能*对上,请提供英文品牌名+具体型号+数量。
3.询价的商友请主动告知公司名称和,谢谢。
德国Stork Tronic 温控器
瑞士STRAUB WERKE AG 管道接头
Tensile pipe coupling | |
STRAUB-METAL-GRIP Pull out resistant pipe coupling for all metal pipes to meet the highest standards | |
STRAUB-GRIP-L Pull out resistant pipe coupling for all metal pipes | |
STRAUB-METAL-GRIP FF For use wherever fire protection is required by law | |
STRAUB-GRIP-L FF For use wherever fire protection is required by law | |
STRAUB-ECO-GRIP Economical, pull out resistant pipe coupling for use in low pressure and temperature areas with metal pipes, PVC, ABS, CPVC | |
STRAUB-PLAST-GRIP Pull out resistant pipe coupling for plastic pipes | |
STRAUB-COMBI-GRIP Pull out resistant pipe coupling for transitions from plastic to metal piping | |
STRAUB-PLAST-PRO NEW! Axial restraint connection of PE80 and PE100 pipes in dimension |
| ||||||||||||||||||||||||||||||||||||||
|
2-PHASES HYBRID -STEPPER MOTORS |
All STÖGRA standard motors are 2-phases 1,8° hybrid stepper motors. The customer can select the optimal stepper motor for his application out of a great variety of stepper motor models with different dimensions and operating torque characteristics. |
standard versions | ||
gear heads, encoder and brakes for STÖGRA-stepper motors | ||
STÖGRA-stepper motors – connections via connectors | ||
STÖGRA-stepper motors – special versions | ||
options for STÖGRA-stepper motors | ||
hollowshaft motors series SMH88 and SMH107 | ||
download – catalogue or single datasheets |
STANDARD VERSIONS |
1,8° step angle (at full step operation) | ||||
cast connecton box (IP55) or leads connection (IP41) | ||||
metric or inch dimensions | ||||
isolating class F | ||||
high voltage proofed according to DIN VDE 0530 | ||||
CE-conform |
series SM 56 motor diameter 56,5mm holding torque 0,4 Nm bis 1,2 Nm | ||
series SM 87 / SM 88 motor diameter 86mm holding torque 1,2 Nm to 4,8 Nm (SM 87) holding torque 2,0 Nm to 8,0 Nm (SM 88) | ||
series SM 107 motor diameter 108mm holding torque 4 Nm to 16 Nm | ||
series SM 168 motor diameter 168mm holding torque 19 Nm to 38 Nm |
back | Stepper motors catalogue |
GEAR HEADS, ENCODER AND BRAKES FOR STÖGRA-STEPPER MOTORS |
back | Stepper motors catalogue |
STÖGRA-STEPPER MOTORS – CONNECTIONS VIA CONNECTORS |
Stepper motors with connector according to Mil-C-5015 series SM ... Z257 | |
STÖGRA stepper motors series SM 56, SM 87, SM 88 and SM 107 are available with connectors according to standard Mil-C-5015, which is widely used in the industry (motors with option Z257) connector type for motor connections: MS3102R14s-5P |
SM 87.2.18M6 Z257 | SM 87.2.18M6 Z257 | connector MS3102R14s-5P |
Stepper motors series SM 56 with 9-pole D-Sub connector | ||
Motor series SM 56 is available optionally with D-Sub connections Follwoing versions exist: | ||
straight connector backwards (at rear cover) – option Z154 | ||
straight side connector – option Z159 | ||
angled side connector – option Z182 | ||
All motors are available optionally with encoder and brake, where encoder and brake each have their own D-Sub connector |