详细介绍
Reco Induction Bearing Heaters
order on line
Dimensions
Model SC110D | Model SC | Model BC | Model BCS | Raising Blocks
link to accessories( bearing sentry, pyrometer/thermometer) page
link to Operating Instructions (110K) | Feuillet D'Utilisation ( 110k)
The Reco Induction Bearing Heater is the superior method of expanding bearings, gears, sprockets, couplings and sleeves. For placement on shafts, it is the safest, quickest, most economical method of applying heat.
Induction heating is safe - no fire hazard from open flames or contamination from hot oil baths or forcing cold bearings on with a hammer
Evenly heats the bearing's inner race for longer life from proper installation
Quick, positive bearing installation - correct alignment is assured to reduce costly shutdown
Portable - just plug it in, requires less man hours
Steel case for durability and long life
Can be used to demagnetize bearings
Available in 3 models to handle most applications
Reco bearing heaters come complete with two standard cross bars for a wider range of bearings
All bearing heaters are single phase 60 hz units.
50 hz versions available as special request.
catalog number | A | B | C | D | E | F |
SC | 4-3/4" | 3-5/8" | 3/4" | 3/4" | 9-1/4" | 9" |
BC | 8" | 7" | 1-1/4" | 1-1/4" | 14-3/4" | 16" |
BC Special | 12-1/4" | 7" | 1-1/4" | 1-1/4" | 18-3/4" | 16" |
Back to Top of Page
SC110D Model
- Bearing Capacity 11" O.D x 4" wide.
- Computer chip automatically monitors and stabilizes temperature.
- Optional raising block available to increase bearing O.D. capacity to 14"
- All bearing heaters are single phase.
- Weight: 56 lbs
Catalog Number | Voltage | standard cross bars | optional cross bars |
RECO-SC110D | 110V ( 17 amp) | 3/4" , 2" | 1-1/4 |
SC Model
- Choice of Either 110 V or 220V models
- Bearing capacity:11" O.D x 4" wide.
- Optional raising block available to increase bearing O.D. capacity to 14"
- All bearing heaters are single phase.
- Weight: 52 lbs.
- order on-line
Catalog Number | Voltage | standard cross bars | optional cross bars |
RECO-SC110 | 110V ( 17 amp) | 3/4", 2" | 1-1/4" |
RECO-SC220** | 220V ( 11 amp) | 3/4", 2" | 1-1/4" |
order on-line
Back to Top of Page
BC Model
- Choice of either 220V, 440V or 550V Models
- Bearing capacity: 22" OD x 7-1/2" wide
- Optional raising block available to increase bearing O.D. capacity to 32"
- Weight: 200 lbs.
- All bearing heaters are single phase.
Catalog Number | Voltage | standard cross bars | optional cross bars |
RECO-BC220 | 220V ( 30 amp) | 1-1/4, 3" | 1", 2" |
RECO-BC440 | 440V ( 20amp) | 1-1/4, 3" | 3/4", 1", 2" |
RECO-BC550 | 550V ( 15 amp) | 1-1/4, 3" | 3/4", 1", 2" |
warning: Do NOT use 3/4" bar with model BC220V
Back to Top of Page
BC Special Model
- Choice of either 220V, 440V or 550V Models
- Bearing capacity: 22" OD x 11-1/2" wide
- Weight: 235 lbs.
- All bearing heaters are single phase.
Optional raising block available to increase bearing O.D. capacity to 32"
Catalog Number | Voltage | standard cross bars | optional cross bars |
RECO-BCS220 | 220V ( 30 amp) | 1-1/4, 3" | 1" *, 2" |
RECO-BCS440 | 440V ( 20 amp) | 1-1/4, 3" | 1" *, 2" |
RECO-BCS550 | 550V ( 15 amp) | 1-1/4, 3" | 1" *, 2" |
CAUTION:
Bearing Heater should not be set within 24" of metal structures
To Demagnetize:
Simply remove bar, turn heater on and pass bearing several times between the two upright columns without contacting columns.
Warning
DO NOT operate an induction bearing heat if you have a heart pace-maker. The strong magnetic field emitted my the heater may affect operation of such devices.
Back to Top of Page
Raising Blocks
- provides additional height utilizing existing unit to handle larger bearing outside diameters
- SC raising blocks increase SC bearing heater capacity up to 14" OD.
- BC raising blocks increase BC and BC Special bearing heater capacity up to 32" OD
Catalog Number | Height | Width | Approx Weight |
RECO-SCRB (fits SC bearing Heaters) | 2-3/8" | 2-5/8" | 7.5 lbs. |
RECO-BCRB (fits BC and BC Special Bearing Heaters | 5" | 3-5/8" | 31.0 lbs. |
Back to Top of Page