QG/FG系列气流干燥机原理Principle

底部强化器设计*，搅拌齿为菱形，其流线性能使风阻达到小，设置在圆锥形料斗内，分动刀和定刀，粉碎*,使下落的结块物料迅速粉碎为适合气流干燥的粉粒料，搅拌的另-一个主要作用是分散物料，加大了与料斗下面进来的高速热风的接触面积，于是料斗区形成了一个强烈传热传质的流化床，大部分湿分在料斗区被干燥。随着干燥的进行，变轻变细的干料受气流作用明显，与气流一起上升并进一步干燥，后从干燥塔顶部出来进入物料收集系统。
The bottom of dryer has the unique enhanced design, stirring rack is diamond shaped, its linear flow design can reduce wind resistance into a minimum degree, also the grinding knifes are equipped at the bottom, the results of grinding are obvious, the falling the materials can be rapidly crushed into powders which are suitable for air flow drying, another function of stirring is dispersing materials, thus can enlarge the contacting area with high speed hot air coming from the bottom, and most of moisture is dried during this stage, and then the dried material becomes lighter and lighter, and flow up with hot air, finally comes out from the top of dryer and goes into material colleting system.

适用物料Materials
   本机特别适合处理含湿量比较大的呈膏糊状的湿物料，以及用其他气流干燥方法无法干燥的物料，适用于滤饼、膏状、带有一定粘性、要求成品为粉末的产品。

 QG/FG系列气流干燥机