Fluke T5 Voltage, Continuity and Current Testers详细说明
Electrical tester with OpenJaw™ Current
The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Available in 600V and 1000V models.
Automatically measures volts ac and volts dc with precise digital resolution
Displays resistance to 1000Ω
Easy and accurate OpenJaw™ current measurement
Continuity beeper
Compact design with neat probe storage
Rugged enough to withstand a 10-foot (3m) drop
Detachable SlimReach™ probe tips are customized for national electrical standards
Test leads accept Fluke accessory test clips
Available in 600V and 1000V models
Can stay connected much longer than solenoid type tester
Auto off mode to conserve battery life
Optional holster attaches to a belt and neatly stows test leads
Specifications
Continuity beeper
Threshold:
On at <25 Ω, off at >400 Ω
Volts indicator LED
Threshold:
Guaranteed on by 30V ac
Environmental Specifications
Operating Temperature
-10 °C to 50 °C
Storage Temperature
-30 °C to 60 °C
Humidity (Without Condensation)
0% to 95% (5 °C to 30 °C)
0% to 75% (30 °C to 40 °C)
0% to 45% (40 °C to 50 °C)
Dust/water resistance
Yes
Operating Altitude
2000 meters max
Temperature Coefficient
0.1 x (specified accuracy)/degree C (<18 °C or >28 °C)
Safety Specifications
Overvoltage category
T5-600:
600V ac/dc, CAT III
T5-1000:
1000V ac/dc, CAT III 600V ac/dc, CAT IV
Agency Approvals
UL, CSA, and VDE
Maximum voltage
between any terminal and earth ground
Mechanical & General Specifications
Size
30.5 x 51 x 203 mm
Weight
300g
Warranty
2 years
Battery Life
200 hour zinc chloride, 400 hour alkaline
Battery type
Two AA zinc chloride
Low battery indicator
Yes
Current sensor opening
12.9 mm
Calibration cycle
1 year
Test leads
Type:
Heavy duty, flexible leads rated for 1000V use.
Field replaceable leads terminate in male shrouded banana plugs
Probes:
One red, one black. of two tip
Detachable Slim-ReachT probe tips in one
Styles:
TP1 Slim Reach Test Probes
07-443 手持高级蛤壳式数字密度计
6692A 6600 W系统电源,60V,110A详细说明
主要特性与技术指标
额定输出
电压:0至60 V
电流:0至110 A(从40°到55°C每°C线性下降1%)
编程精度(25° ±5°C)
电压:0.04% + 60 mV
电流:0.1% + 65 mA
纹波和噪声(20 Hz至20 MHz)
恒压rms:1.5 mV
恒压峰峰值:25 mV
负载电感 >5 µH时的恒定电流rms:30 mA
读回精度(在25 ±5°C时,根据实际输出分别通过前面板或GPIB 接口获得)
电压:0.05% + 90 mV
±电流:0.1% + 80 mA
描述
安捷伦高性能直流电源可加快测试速度,提高测试精度,为测试创造理想的条件。6690A-6692A 6600 W GPIB单路输出电源提供低输出纹波和噪声;对输出电压和电流的模拟控制能力;可将噪声减到小的风扇转速控制能力;以及内置测量和的可编程特性。Agilent 6692A 6600W GPIB单路输出电源是一款大功率、低噪声的可靠电源,具有高的的精度、的可靠性和性能,适用于要求极为严格的大功率应用,如制造业测试和老化测试。