一、工作原理及应用范围介绍Introduction of Working Principle and Scope of Application
2D mixer is mainly composed of a drum, a swing frame and a rack. The drum is installed on the swing frame, supported by four rollers, and positioned by two driving wheels on the axle direction. Among four supporting rollers, two of them are dragged by rotating power system; the swing frame is drove by one group of crank rocker mechanism to make the drum moving up and down; the crank rocker mechanism is installed on the rack, and swing frame is supported by the bearing assembly on the rack.
It is widely applied in the mixing assembly of pharmaceutical factory, and large batch mixing of food, chemical, feed, and powder metallurgy industries.
1.The equipment is simple in structure, small in floor area, automatic and clean in discharge.
2.The shoveling plate may be set in the container as per the process requirement to strength the mixing efficiency.
3.It is stable in operation and convenient for clean.
4.It can meet the total mixing of large batches as required by the process.
Technical parameters (the values in the table below are for reference in type selection only)