转子泵属容积式泵的一种型式，通过转子与泵体间的相对运动来改变工作容积 ，从而使流体的能量增加。

1.转子泵中凡与输送物料接触的零配件，均采用符合卫生标准的不锈钢材料制作，其密封件均采用无毒橡胶。可靠的防锈性和无毒密封性确保了安全卫生。

2.转子的流线结构以及转子室中无死点和非金属件，避免了对被输送物质造成污染。

3.适用于就地CIP清洗与蒸汽消毒，*符合美国FDA规范要求及医药级（GMP）规范要求。

4.特别适用于再输送过程中容易起泡沫以及输送高粘度、高浓度及任何含颗粒的介质，经其输送的物料保持原有的品质部变，不起任何理化反应。

5.采用外装动、静环式机械密封，可直接水冲洗，耐高压，不易磨损，无泄漏。

6.体积小，流量大，扬程压力高，适用长距离与高阻力定量输送。

7.泵的叶轮与传动齿轮分开，且在泵腔内各零配件之间保证一定的间隙，相互不接触，伍磨损，低噪音，可靠性好，使用寿命长，节能降耗。

8.配置变频器后，可以随意调节流量，并可做一般计量泵使用。

9.可输送汽、液、固等三相混合物料。可以输送的介质的粘度可高1000000CP和含固量达55%的浆料。

10.结构紧凑，维护方便，几乎无易损件，运行成本低。

The rotor pump is a type of positive displacement pump, which changes the working volume through the relative movement between the rotor and the pump body, thereby increasing the energy of the fluid.

1. All the parts in the rotor pump that come into contact with the conveyed materials are made of stainless steel materials that meet hygienic standards, and their seals are made of non-toxic rubber. Reliable rust resistance and non-toxic sealing ensure safety and hygiene.

2. The streamline structure of the rotor and the absence of dead spots and non-metallic parts in the rotor chamber avoid pollution to the conveyed material.

3. It is suitable for in-situ CIP cleaning and steam sterilization, and fully complies with the requirements of the US FDA and pharmaceutical grade (GMP) specifications.

4. It is especially suitable for foaming during re-transportation and for conveying high-viscosity, high-concentration and any particle-containing media. The material conveyed through it maintains the original quality and does not have any physical and chemical reaction.

5. The external dynamic and static ring mechanical seals are used, which can be directly washed with water, resistant to high pressure, not easy to wear, and have no leakage.

6. Small volume, large flow, high lift pressure, suitable for long-distance and high-resistance quantitative transportation.

7. The impeller of the pump is separated from the transmission gear, and a certain gap is ensured between the parts in the pump chamber, without contact with each other, with no wear, low noise, good reliability, long service life, energy saving and consumption reduction.

8. After configuring the inverter, the flow can be adjusted at will, and it can be used as a general metering pump.

9. It can transport three-phase mixture materials such as vapor, liquid and solid. The viscosity of the medium that can be transported can be as high as 1,000,000 CP and the slurry with a solid content of up to 55%.

10. Compact structure, easy maintenance, almost no wearing parts, low operating cost.

图片信息：304不锈钢泵卫生级转子泵工作原理厂家

公司简介：

安徽利勒洁净设备科技有限公司是国内专业生产制造洁净卫生级阀门管件，主要应用于食品机械行业、制药机械行业、乳制品行业、酿酒饮料行业以及精细化工等行业高精度卫生级流体设备的专业生产厂家，产品规格齐全；产品主要有：

无菌隔膜阀，卡箍直通隔膜阀，三通隔膜阀，法兰隔膜阀，气动隔膜阀，U型隔膜阀，罐底隔膜阀 ；

无菌球阀，卡箍直通球阀，螺纹球阀，焊接球阀，气动球阀，法兰球阀，电动球阀；

卫生级蝶阀，焊接蝶阀，卡箍直通蝶阀，螺纹蝶阀，法兰蝶阀，气动蝶阀，电动蝶阀；

不锈钢卫生泵，不锈钢卫生级离心泵，不锈钢卫生自吸泵，不锈钢酒精防爆泵，卫生奶泵，卫生饮料泵；

止回阀，过滤器、呼吸器、换向阀、防混阀、安全阀；304不锈钢泵卫生级转子泵工作原理厂家

卫生级不锈钢管件，焊接弯头，快装弯头，不锈钢三通，快装三通，四通，真空弯头，大小头；

罐顶组件系列，不锈钢储罐，发酵罐，不锈钢卫生级人孔，清洗球/器，视镜灯，排气阀等其它非标产品生产加工；

我们竭诚为您服务.