卫生级内螺纹取样阀 Sanitary thread sampling valve

卫生级内螺纹取样阀 Sanitary thread sampling valve

工作原理  无菌取样阀可于每次取样之前和之后进行菌处理

阀门开:取样

手动阀门可以通过转动手柄开启(可调节式阀门)或通过驱动杆开启(开/关式阀门) 此时阀杆及隔膜回缩，使液体流入。

阀门关:杀菌

进行相反步骤时内置弹簧使阀门关闭，使软管部件之间的腔道空出以进行杀菌。如果使用蒸汽杀菌，我们建议在阀出口装一小型的泄压阀(属于选择类产品)。

标准设计  无菌取样阀由三部分组成，阀体，阀头和隔膜。橡胶隔膜置于阀头杆上使其可以伸缩。各型号间阀体和阀头可互相替换。

无菌取样阀有两种规格:

M4阀门用于低黏度物料比如水，啤酒，酒类和液状牛奶。

W9阀门用于高黏度物料比如水果型酸奶，糖浆和冰淇淋。

W9阀门还可配以微型取样口，通过样针进行取样。

温度   杀菌温度，干燥蒸汽(2~3 bar); 121~134℃

阀体类型包括:  用于容器安装的焊接口，用于管路安装的焊接口，带卡箍接口或带螺纹接口。

阀体     T型: 用于容器安装(焊接口)。       P型: 用于容器安装(焊接口)。

C型: 卡箍接口。                           S型: 插式接口(螺纹)。

材质   阀体: 不锈钢，AISI 316L              阀头: 不锈钢，AISI 304

隔膜:硅橡胶(标准型阀门)                         三元乙丙橡胶(EPDM)(带微型取样口的阀门)

技术参数

阀座处工作压力(阀关闭): 1000 kpa (10 bar)

阀盖处工作压力(阀开启): 橡胶500kpa (5bar)

不锈钢:1000 kpa (10 bar)

Sanitary thread sampling valve                                                      

Asepticsampling valve can be carried out before and after each sampling Fungi

Valve opening：sampling   Youcan man ally turn the handle opens the valve （adjustable valves）or by driving bar （open/close valve）valve stem and diaphragmretraction at this time, so that the liquid flows.

Valve off: Sterilization

Built-instep for spring opposite the valve closed, the cavity between the hosecomponents vacated for sterilization. lf you use steam sterilization, we recommendinstallation in the valve outlet of a small pressure relief valve (of theselected products.)

Standarddesign  Asepticsampling valve consists of three parts, valve, valve head and diaphragm .Rubberseptum membrane placed on the valve head so that it can be flexible rod. Betweenthe valve body and the head model can be interchangeable.

Asepticsampling valve in two sizes:

M4valve for low viscosity materials such as water ,beer, liquor and liquid milk.

w9valve for high viscosity materials such as fruit, yogurt syrup and ice cream.

W9valve can also be coupled with micro-sampling ports ,sampling by syringe.

Temperature  Maxinum sterilizationtemperature, dry steam (2~3bar): 121~ 134℃

Valve body types include: Weldingfor the installation of the container port, portwelding forpipeline instllation, interfaces with a clampor threadedinterface.

Valve body T-type:for vessel installation (welding mouth).

P-type:for vessel installation (welding mouth).     C-type: Clamp interface.

S-Type:Plug-in interface (thread).

Material Body: Stainless steel, AlSl 316L        Valve head: stainless steel, AlSl304

Diaphragm:Silicone rubber (standard valves)

Ethylenepropylene diene monomer (EPDM) (with micro-sampling port valve)

Technical parametersWorkpressure at the valve seat (valve closed): 1000 kpa(10 bar)

Workpressure at the valve cover (valve open): Rubber 500kpa (5 bar)

Stainless steel: 1000 kpa (10 bar)