旋转式压片机 返回列表页

外围罩壳为全封闭形式，材料采用不锈钢，内部台面用不锈钢材料，转台表面经过特殊处理，能保持表面光泽与防止交叉污染，符合GMP要求。

装有透明玻璃的门窗，能清楚观察压片的状态，并且能全部打开，易于内部清理和保养。

所有控制器和操作均布局合理。

采用变频调速成装置进行电气调速，操作方便，转动平稳，安全准确。

所有的传动装置均布置在机器内部，保持机件清洁。

液压系统设计合理，能保证液压系统的稳定。

配有过载保护装置，当压力过载时，能自动停机。

本机配有电磁制动电动机和其他安全保护装置，运行时也能调整和操作。

冲模可与ZP19、ZP33等压片机通用。

ZP35B是ZP35A的改进型产品增加了预压。

●The outside part of the machine is fully-enclosed, The material of the cover and the inside bable face is stainless steel. The turret face is specially disposed keeping the lustre of the face and prevent the cross pollution, meeting the G.M.P rerquirement.
●It has transparent windows so that press condition can be observed clearly and the window can be opened.
●Cleaning and maintenance is easier.
●The lay-out of all the controllers and the operate parts is reasonable.
●The speed adjustment of the driver is controlled by the frequency conversion device.
●All the drive devices are located inside the machine so keep the machine clean.
●The hydraulic system can assure the stable of the system.
●A overload protection unit is included in the system to avoid the damage of the punches and apparatus, when overload occurs, the machine stops automatically.
●This machine also has electronic magic driver and other safety protection device which can be adjusted and operated when running.
●The punches and dies are also applicable to Model ZP19 ZP33.
●ZP35B is an inproued uersion of ZP35A with additonal fuaction of precompression.