JN型系列多功能酒精回收浓缩器

JN Series type multiple function alcohol reclamation concentrator

本设备适用于中药、西药、葡萄糖、酿酒、淀粉、口服液、化工、食品、味精等工业酒精回收，能用于批量小、品种多的热敏性低温真空浓缩。

The device is to concentrate the material in the occasions such as China traditional drug、weat drug、dextrose、amylum sugar、oral liquid、chemistry、foodstuff、monosodium glutamate and vintage and to reclaim the industrial organic solvent such as alcohol.It is suitable to concentrate the thermal sensitive material under lower temperature and vacuum with little batch number and multiple varieties.

技术参数Technology Parameter：

型  号 规 格	JN-500         JN-1000           JN-1500
蒸发量(kg/h)	500            1000             1500
回收酒精浓度(%)	85
回收量(kg/h)	200            350               500
蒸汽压力(Mpa)	0.09
真空度(Mpa)	-0.08
蒸发温度(℃)	40-80
浓缩比重	1.2-1.4
设备重量(kg)	1300           1850             2850
长	2000           2200             2500
外型尺寸(mm) 宽	1000           1200             1300
高	3000           3300             3500
容器类别	一类

 

设备特点与效益：

1、          酒精回收：回收能力大，采用真空操作方法，改进了设备的工艺流程。回收率能达到95%，使酒精损耗率低于5%。能耗降低30%，具有投资小，回收效益高的节能设备。

2、          浓缩液料：本设备采用外加热自然型循环式与真空负压蒸发方式，能具有蒸发速度快，浓缩比重可达(1.4)；液料在全密封中无泡沫浓缩，用本设备浓缩出来的药液，具有无污染，药味浓。清洗方便，打开加热器上下盖即可。操作简单，占地面积小，外形美观，加热器、蒸发器、保温完整出厂，本设备与液料接触部件均采用不锈钢SUS304制造，保温采用聚胺脂发泡或珍珠棉，外表面磨砂亚光处理，符合GMP医药标准。

1、          Alcohol reclamation:The large reclamation capacity and the vacuum operation mode improve the craft process with a recla-mation rate of alcohol of 95% and a loss rate of alcohol below5% The power consumption lowers for30%,which improves that the device is a energy-saving equipment with economical investment and high reclamation economy profit.

Cocentrated liquid material: The device uses the modes of outer-heated natural cycle and vacuum negative pressure evaporation with concentration proportion of(1.4); The liquid material concen-trates without bubble under full seal state.The drug liquid after concentration by the device features non-contamination and thick drug taste and easy cleaning(it is just to open the up and down cover for cleaning).The device is easy to handle and it needs a little forndation area for install ation.The heater and Evaporator use stainless steel for thermal purpose.The polyurethane or pearl cotton is used as the thermal material.The surface is treated with snd grinding and surface polishing,meeting with the GMP standard.