进口卫生型离心泵英国卫生型离心泵

进口卫生型离心泵

 进口卫生型离心泵 英国进口卫生型离心泵

进口卫生型离心泵 进口卫生型离心泵 英国进口卫生型离心泵概述 Summary
应用现代新技术和新概念不断革离心泵的生产工艺。新一代卫生级离心泵是英国格林的骄傲。因为它除了符合GMP要求，传统的质量外。为用户提供的泵性能更好，效率更高，使用寿命更长，用户受益更大。

进口卫生型离心泵特点 Characteristic
属于涡轮导流离心泵，可以在负压0.09Mpa压力下，抽取真空罐里的液体。在处理过程中满足卫生要求，柔和不损伤物料，并具抗化学物性能强光泵业所有与物料接触的部分均使用SUS304,SUS316L的材质。其标准配置包括外壳和泵脚。卫生级自吸泵是在标准离心泵基础上设计的高压泵，适用于高进口压力场合，可承受高达40bar 的进口压力。本泵是设计开式叶轮,内部镜面抛光、*、清洗后无滞留物、噪音低。
规　　格：3T－180T, 0.75KW-75KW
材　　质：SUS304 SUS316L (在材料的选用上泵体、泵盖、叶轮等凡与物料接触之零件由SUS316L或SUSI304不锈钢制造)
标　　准：DIN、 SMS
叶　　轮：分开式叶轮和半闭式叶轮。
表面处理：接液部分抛光，其余亚光或喷砂处理。
工作条件：卫生离心泵属高低液位几水平输送，有一定吸力。 
zui大进口压力：0.5MPa
温度范围：-10°C至+140°C(EPDM)
可冲洗机械密封：
水压：zui高0.1MPa
水量：0.25-0.5L/min
进口卫生型离心泵电机Electric machinery：
1．根据配置主要采用“ABB,西门子,东元”品牌的三相交流电机，按照电工委员会IEC60034.IEC60072标准设计制作，符合欧共体“CE”标记要求。
2、可供选用防爆电机，以满足不同场合的需要。
3、优越的电气性能、低噪音、低震动，电机的标准设计防护等级为IP55，绝缘等级为F级。
4、工作电压：
≤3Kw,220-240V/380-420V,△/Y
＞3Kw,380-420V/660-690V,△/Y
5、频率：50Hz/60Hz
6、工作方式：连续（SI）
7、转速：标准泵的转速为2900r/min
 
进口卫生型离心泵应用Application:
 
药品类:输液，蒸馏水，高纯水，含颗粒3-6毫米的中药液体，浸出液；化妆品类:染料，酒精，香精油；乳品类:乳清，奶油，牛奶，糖液；饮料类:酒精，白酒，啤酒，麦芽汁， 发酵液，果汁饮料，带颗粒饮料；其它:糖果业，焙烤业，化工领域等。

进口卫生型离心泵guan网：http://www.twvalve。。ｎｅｔ/html/3131.html

Imported sanitary centrifugal pump

Imported sanitary centrifugal pump imported from the UK health type centrifugal pump

Imported sanitary centrifugal pump imported sanitary centrifugal pump imported from the UK health overview of Summary type centrifugal pump

The application of modern new technology and new concept to the production of centrifugal pump. A new generation of sanitary centrifugal pump is the pride of Green. Because it is in line with the requirements of GMP, the traditional quality. To provide users with better pump performance, higher efficiency, longer service life, users benefit more.

Characteristics of imported sanitary centrifugal pump Characteristic

The utility model relates to a centrifugal pump with a turbine diversion, which can extract liquid in a vacuum tank under the negative pressure of 0.09Mpa. In the treatment process to meet the health requirements, soft without damage to the material, and has anti chemical properties of the pump all the materials and parts are used SUS304, SUS316L material. The standard configuration includes the shell and the pump foot. Sanitary self priming pump is designed on the basis of the standard centrifugal pump high-pressure pump, suitable for high inlet pressure, can withstand up to 40bar of the inlet pressure. The pump is designed to open impeller, the internal mirror polishing, no dead ends, no residue after cleaning, low noise.

Specification: 3T180T, 0.75KW-75KW

Material: SUS304 SUS316L (in the selection of materials of the pump body, pump cover, impeller and other parts all contact with the material of stainless steel made by SUS316L or SUSI304)

Standard: DIN, SMS

Impeller: separate impeller and semi closed impeller.

Surface treatment: wetted parts polishing, the matte or sandblasting.

Working conditions: sanitary centrifugal pump is a level of high and low level of transport, there is a certain suction.  

Maximum inlet pressure: 0.5MPa

Temperature range: -10 degrees C to +140 degrees C (EPDM)

Washable mechanical seal:

Hydraulic pressure: maximum 0.1MPa

Water: 0.25-0.5L/min

Imported sanitary centrifugal pump motor Electric machinery:

1 according to the configuration of the main "ABB, SIEMENS, East yuan" brand three-phase AC motor, in accordance with the International Electrotechnical Commission IEC60034.IEC60072 standard design, in line with the EC "CE" marking requirements.

2, explosion-proof motor can be used to meet the needs of different occasions.

3, superior electrical performance, low noise, low vibration, the standard design of motor protection class IP55, insulation class F.

4, working voltage:

3Kw, 220-240V/380-420V, /Y

3Kw, 380-420V/660-690V, /Y

5, frequency: 50Hz/60Hz

6, working mode: continuous (SI)

7, speed: standard pump speed of 2900r/min

Application of imported sanitary centrifugal pump Application:

Drugs: the infusion, distilled water, high pure water, liquid medicine containing particles, 3-6 mm lixivium; cosmetics: dye, alcohol, essential oils; dairy products: whey, cream, milk, sugar; drinks: alcohol, liquor, beer, malt juice, fermentation broth, juice drinks, beverages with particles; other: the candy industry, baking industry, chemical industry etc..

Imported sanitary centrifugal pump Guan net: http://www.twvalve。。ｎｅｔ/html/3131.html

英国格林代理商上海凡而阀门有限公司，咨询：

英国格林相关领域业绩：杭州地铁1号线、杭州地铁2号线、杭州地铁4号线，南京地铁1号线、南京地铁2号线、南京地铁3号线、南京地铁4号线、南京地铁10号线。

帝国化学工业、美国科氏工业、美国联合能源、艾默生电气、卢克石油、中国海洋石油。

Green field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.

Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.