官方微信|手机版|本站服务|买家中心|行业动态|帮助

产品|公司|采购|招标

进口膜片电磁阀|进口先导式电磁阀

参考价面议
具体成交价以合同协议为准
  • 公司名称上海凡而阀门有限公司
  • 品       牌
  • 型       号TYLER
  • 所  在  地上海
  • 厂商性质代理商
  • 更新时间2017/4/28 16:03:55
  • 访问次数608
在线询价 收藏产品 查看电话 同类产品

联系我们时请说明是 制药网 上看到的信息,谢谢!

上海凡而阀有限公司是一家具有二十多年历史的大型阀门生产企业,是全国Z主要和较大的闸阀、截止阀、球阀、蝶阀、水力控制阀等通用阀门供应商之一。在石油、化工、冶金、电力、建筑、热力、供水等行业具有很高的度及影响力。产品一直供不应求,国内外市场。 

 

上海凡而阀有限公司秉着“以诚为本,互惠双赢的原则,服务于广大客户。全面实行标准化、专业化、科学的管理制度,公司始终坚持诚品求生存,科技求发展的经营方针,在产品品质上以精益求精,追求*为质量方针。

球阀、针型阀、截止阀、闸阀、止回阀、蝶阀、阻火器、排气阀、排泥阀、过滤器、放料阀、隔膜阀、安全阀、旋塞阀、手机:13917909444
进口膜片电磁阀(先导式膜片电磁阀)

美国泰乐TYLER进口先导式膜片电磁阀产品概述:
进口先导式膜片电磁阀,美国工艺,出口系列,品质可靠。包括阀体、阀座、阀膜片、先导阀,所述阀膜片包括开关阀座的*主体部和包围此主体部的弹性支持部,*主体部下端面边缘与阀座的阀口端面密封配合,*主体部下端面有一锥台形凸起,阀座的阀口为可与上述锥台形凸起配合的锥形口。由于该先导式膜片电磁阀膜片*主体部下端面有
进口膜片电磁阀|进口先导式电磁阀 产品信息

进口膜片电磁阀(先导式膜片电磁阀)

 

美国泰乐TYLER进口先导式膜片电磁阀产品概述:

进口先导式膜片电磁阀,美国工艺,出口系列,品质可靠。包括阀体、阀座、阀膜片、先导阀,所述阀膜片包括开关阀座的*主体部和包围此主体部的弹性支持部,*主体部下端面边缘与阀座的阀口端面密封配合,*主体部下端面有一锥台形凸起,阀座的阀口为可与上述锥台形凸起配合的锥形口。由于该先导式膜片电磁阀膜片*主体部下端面有一锥台形凸起,因此当电磁阀闭合时,锥台形凸起可起到泄流削峰的作用,降低了进口水锤,有效地解决了阀门突然关闭,使后续水流在惯性的作用下水压力迅速增大,破坏阀门和管壁的问题,同时延长了膜片使用寿命。广泛应用于化工、石化、石油、造纸、采矿、电力、燃气、给水排水、机械设备配套、电子工业等领域,“美国品质,寰球共享”

 

Import diaphragm solenoid valve (pilot diaphragm solenoid valve)

The United States imported TYLER Taylor pilot type diaphragm electromagnetic valve product overview:

The import of the leading diaphragm solenoid valve, including valve, valve seat, diaphragm valve, pilot valve, diaphragm valve seat and the valve comprises a switch body and surrounding the central body portion of the elastic support, with the end of the central body under the Ministry of edge and valve seat of the valve seal, the central body lower end surface is provided with a cone shaped bulge. The seat of the valve is with the conical taper bulge with the mouth. The leading diaphragm electromagnetic valve diaphragm has a central body under end cone shaped bulges, so when the solenoid valve is closed, cone shaped projections can play a role of peak discharge, reduced import water hammer, effectively solve the valve suddenly closed, the subsequent flow in the role of inertia of water pressure increases rapidly., damaging the valve and pipe wall, and prolong the service life of diaphragm.

 

进口先导式膜片电磁阀技术参数:

         公称通径

DN15-300

         适用介质:

水、气、油

         介质温度:

-5~80℃

         动作方式:

先导式

         工作压力

常闭式:0.3~16kgf/cm2;   

         

         电源电压:

220VAC/50HZ 12VA; 110 VAC/50HZ  12VA;  DC24  11 W;

  膜片式密封膜片材质:

ding腈橡胶(NBR)

 

 

 

进口先导式膜片电磁阀工作原理:

进口先导式膜片电磁阀为二次开阀的先导式电磁阀,其结构主要由导阀和主阀组成,主阀采用橡胶密封结构。 常位时,活动铁芯封住导阀口,阀腔内压力平衡,主阀口封闭。当线圈通电时,产生电磁力将活动铁芯吸上,主阀腔内的介质自导阀口外泄,以至产生压力差,膜片或阀杯被迅速托起,主阀口开启,阀便呈通路了。当线圈断电,磁场消失,活动铁芯复位,封闭导阀口,导阀和主阀腔内压力平衡后,阀又呈关闭状态。

Working principle of imported pilot diaphragm solenoid valve:

Imported pilot solenoid valve solenoid valve for the two pilot solenoid valve, its structure is mainly composed of pilot valve and main valve, the main valve with a rubber seal structure. When the utility model is in constant position, the movable iron core seals the pilot valve port. When the coil is energized, the electromagnetic force will be generated on the active iron core, the main valve chamber of the media self guided valve port leakage, and even the pressure difference, the diaphragm or the valve cup was quickly hold up, the main valve opening, the valve will be a way out. When the coil is cut off, the magnetic field disappears, the movable iron core is reset, the pilot valve is closed, and the pressure balance between the pilot valve and the main valve chamber is closed.

 

进口先导式膜片电磁阀如何安装?

进口先导式膜片电磁阀,通电时,依靠电磁力提起阀杆,导阀口打开,此时电磁阀上腔通过先导孔卸压,在主阀芯周围形成上低下高的压差,在压力差的作用下,流体压力推动主阀芯向上移动将主阀口打开;断电时,在弹簧力和主阀芯重力的作用下,阀杆复位,电磁阀上腔压力升高,流体压力推动主阀芯向下移动,主阀口关闭。
先导膜片式电磁阀特点:功率消耗低、通径较大,而结构简单、安装方向任意,但只能用于电磁阀两端有一定压差的场合。先导式膜片电磁阀是保护型膜片结构设计,可以使先导式膜片电磁阀寿命延长两倍,先导式膜片电磁阀配管方式可以任意角度安装,为增强寿命是水平管接线圈朝上,先导式膜片电磁阀线圈防护等级IP65,先导式膜片电磁阀适用介质:液体、水、热水、气体、油、瓦斯等。
先导式膜片电磁阀使用须知:1.使用前注意检查元件,在运输过程中是否损坏,然后安装使用。2.安装时,请注意气体流动方向及接管是否正确。3. 使用时,请严格遵守各项技术要求,如工作电压,动作频率,工作压力,使用温度;整机调试时,建议先用手动装置调试,然后再通电调试。4. 请注意防尘,建议排气口安装消声器或消声节流阀。5. 阀前应安装过滤器,并注意消除管接头,管子内的金属颗粒,粉尘及油污等。6. 使用时,按水平的配管施工安装,切忌垂直和倒挂安装。先导式膜片电磁阀适合在较恶劣的环境下工作。产品主要用于控制工业原料的放入,也可以用于调节其他流体

How to install the imported pilot diaphragm solenoid valve?

The import of the leading diaphragm solenoid valve is energized by the electromagnetic force filed stem, the pilot valve port open, when the electromagnetic valve chamber through the pilot hole in the main valve pressure relief, formed around the high pressure on the lower, under the action of the pressure difference, the fluid pressure to push the main valve core to move up to the main valve port open; power, the spring force and the main valve under the action of gravity, electromagnetic valve stem reset, the chamber pressure increases, the fluid pressure to push the main valve to move downward, the main valve port closed.

Pilot diaphragm solenoid valve features: low power consumption, large diameter, and the structure is simple, the installation direction of arbitrary, but only for the solenoid valve at both ends of a certain pressure difference occasions. The leading diaphragm solenoid valve is diaphragm type protection structure design, can make the leading diaphragm solenoid valve life is prolonged by two times, the leading diaphragm solenoid valve piping can be installed at any angle, to enhance life is best coil at the horizontal tube, the leading diaphragm solenoid valve coil protection grade IP65, pilot type solenoid valve for diaphragm medium: liquid, water, hot water, gas, oil, gas, etc..

Pilot solenoid valve solenoid note: 1 before use to pay attention to check the components in the transport process is damaged, and then install the use of. 2 when installation, please note the direction of gas flow and the correct. 3 when using, please strictly comply with the technical requirements, such as the working voltage, the frequency of action, working pressure, the use of temperature; the whole machine debugging, it is recommended to use manual device debugging, and then power debugging. 4 please pay attention to dust, the proposed exhaust muffler or silencer installed throttle valve. 5 valve should be installed before the filter, and pay attention to the elimination of pipe joints, metal particles in the pipe, dust and oil, etc.. 6 use, according to the level of construction and installation of piping, vertical and vertical installation should not be installed. Pilot diaphragm solenoid valve is suitable for working in a hostile environment. Products are mainly used to control the placement of industrial raw materials, can also be used to regulate other fluids

 

客户须知:

询问美国泰乐TYLER电磁阀一级代理商。销售一部(上海凡而阀门有限公司),参数提供如下:

1.公称通径2、公称压力3、流体性质(包括温度、介质) 4.材质 5.连接方式 6电源.电压7、控制方式(常开式、常闭式、自保持式).8、防护形式(防爆型、防水型、防尘型、防潮型、防腐型、普通型)

 

 

美国泰乐相关领域业绩:杭州地铁1号线、杭州地铁2号线、杭州地铁4号线,南京地铁1号线、南京地铁2号线、南京地铁3号线、南京地铁4号线、南京地铁10号线。

帝国化学工业、美国科氏工业、美国联合能源、艾默生电气、卢克石油、中国海洋石油

 

 

美国泰乐代理商上海凡而阀门有限公司,咨询:

 

Customer information:

Welcome to inquire us Taylor TYLER solenoid valve agents. Sales of a (Shanghai and valve Co., Ltd.), the parameters are provided as follows:

1 nominal diameter, nominal pressure 3, 2 fluid properties (including temperature, medium) 5 connection 4 material 6 power. 7, voltage control mode (normally open and normally closed, self retaining.8), protection (explosion-proof, waterproof, dustproof, moistureproof and anticorrosive type type type, ordinary type)

The United States Taylor related field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.

Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.

The United States and Shanghai where agents Taylor Valve Co. Ltd., consulting:

 

 

 

 

同类产品推荐
在找 进口膜片电磁阀|进口先导式电磁阀 产品的人还在看

提示

×

*您想获取产品的资料:

以上可多选,勾选其他,可自行输入要求

个人信息: