德国进口不锈钢污水泵

德国进口不锈钢污水泵 进口不锈钢污水泵厂家 进口不锈钢污水泵价格Stainless steel sewage pump

德国KAYSEN凯森进口不锈钢污水泵概述

不锈钢污水泵属于离心杂质泵的一种，可输送带有酸性、碱性或其他腐蚀性的污水，广泛应用于化工、石油、轻工、食品、制药、酿造、环保及污水处理等行业。

不锈钢污水泵具有多种形式：如潜水式和干式二种，目前zui常见的潜水式为不锈钢潜水污水泵，zui常见的干式污水泵如卧式不锈钢污水泵。

根据不锈钢材质，又可以分为304不锈钢污水泵、316不锈钢污水泵和316L不锈钢污水泵。三者的耐腐蚀性能是递增的，这主要取决于不锈钢材质的含镍量的多少。

主要特点：

整机选用不锈钢材质，满足介质具有腐蚀性的场合，无堵塞、自动耦合安装、配备电机监视系统、具有漏水保护功能。
●不锈钢污水泵采用全不绣钢设计，由水泵、密封、电动机三部分组成。电机位于电泵上部，为单相或者三相异步电动机结构，水泵位于电动机下部，采用上吸水式结构，可以防止因电泵陷入污泥中而发生堵塞的现象。外形采用精密铸造和不绣钢机筒，美观大方，具有防锈、耐腐蚀、无污染等特点。广泛用于各种特殊要求如化工、海水养殖、食品饮料等使用场合。

●电泵采用双端面机械密封装置，具有密封可靠使用安全的特点。密封件及电缆线根据介质条件使用耐腐蚀氟橡胶，安全卫生。

●泵的整体结构紧凑，体积小、重量轻、检修方便，潜水液下即可使用。电泵内部安装有过热电流保护器，防止电机因过载而过热。

不锈钢污水泵是单级、单吸、悬臂式离心污水泵。泵吸入口为轴向水平方向，泵排出口可根据需要装成水平或垂直方向。主要由泵盖、泵壳、叶轮、轴封、轴、和托架等零部件组成。轴封采用新颖的双端面机械密封结构形式，泵与电机安装在共同底盘上，通过弹性联轴器由电机直接驱动。

主要优点：

●节能显著

●运行平稳

●性能可靠

●维修方便

主要应用：

●工厂严重染废水的排放

●城市污水处理

●排污系统工业污水的排放

●人防系统排水站

●市政工程

●建筑工地

Germany KAYSEN Kaisen imported stainless steel sewage pump overview

Stainless steel sewage pump is a kind of centrifugal impurity pump, can be transported with acidic, alkaline or other corrosive sewage, widely used in chemical, petroleum, light industry, food, pharmaceutical, brewing, environmental protection and sewage treatment industries.
Stainless steel sewage pump has many forms: such as submersible and dry two, the most common submersible for the stainless steel diving sewage pump, the most common dry sewage pump, such as horizontal stainless steel sewage pump.
According to the stainless steel material, it can be divided into 304 stainless steel sewage pump, 316 stainless steel sewage pump and 316L stainless steel sewage pump. The corrosion resistance of the three is increasing, depending on the amount of nickel in the stainless steel material.

main feature:

Machine selection of stainless steel material to meet the media with corrosive occasions, no clogging, automatic coupling installation, equipped with motor monitoring system, with water leakage protection.
● stainless steel sewage pump with stainless steel design, by the pump, sealed, composed of three parts of the motor. Motor is located in the upper part of the pump, single-phase or three-phase asynchronous motor structure, the pump is located in the lower part of the motor, the use of absorbent structure, can prevent the pump into the sludge and the phenomenon of clogging. The shape of the use of precision casting and stainless steel barrel, nice, with rust, corrosion resistance, pollution and other characteristics. Widely used in a variety of special requirements such as chemical, marine aquaculture, food and beverage use.
● Electric pump with double-ended mechanical seal device, with a reliable and reliable use of sealed features. Seals and cables according to the media conditions using corrosion-resistant fluorine rubber, safety and health.
● The overall structure of the pump is compact, small size, light weight, easy maintenance, diving can be used. An overheat current protector is installed inside the pump to prevent the motor from overheating due to overload.
Stainless steel sewage pump is a single stage, single suction, cantilever centrifugal sewage pump. The pump inlet is axially horizontal and the pump outlet can be installed horizontally or vertically as required. Mainly by the pump cover, pump shell, impeller, shaft seal, shaft, and bracket and other components. The shaft seal is in the form of a novel double-ended mechanical seal construction. The pump and the motor are mounted on a common chassis and are driven directly by the motor through a flexible coupling.

Key Benefits:
● Significant energy saving
● smooth operation
● Reliable performance
● easy maintenance
 
main application:

● The factory seriously pollutes the wastewater
● City sewage treatment
● Sewage system Sewage discharge
● Air defense system drainage station
●Municipal engineering
●Construction site

德国进口不锈钢污水泵 进口不锈钢污水泵厂家 进口不锈钢污水泵价格

德国KAYSEN凯森对您的承诺：

●放心的质量：从铸件到产品，实行全过程质量监控，*检测，责任到人！

●贴心的价格：高效成本控制，自产自销，减少中间环节，让利于客户！

●快速的货期：充足的库存，上海便捷物流，缩短交货期，严格按照合同期交货！

Germany Kaysen commitment to you:

● Reliable quality: from casting to the product, the implementation of the whole process of quality control, all-round detection, responsibility to the people!

● intimate price: efficient cost control, production for sale, to reduce the intermediate links, to help customers!

● fast delivery: adequate inventory, Shanghai convenient logistics, shorten the delivery time, in strict accordance with the contract delivery!

进口不锈钢污水泵厂家 进口不锈钢污水泵价格